YL泡沫玻璃粘结剂；
介绍了一种以漂珠、附加保温材料和水玻璃粘结剂混制而成的保温冒口套。
A kind of insulating sleeve combined with hollow particles, added insulating material and sodium silicate adhesive is introduced.
本文研究了复合磷酸盐改性水玻璃粘结剂的制备及其型砂的混碾工艺和性能。
This paper deals with the preparation of composite phosphate modified sodium silicate binders and sand mined method and its properties.
借助XPS和SEM微观分析的方法，探讨了水玻璃粘结剂改性方法及材料对水玻璃粘结剂的改性机理。
The mechanism of the modification methods and materials was discussed and analyzed using XPS and SEM.
介绍水玻璃粘结剂容易“老化”的原因和老化现象对水玻璃砂性能的危害，提出水玻璃粘结剂改性的方法与应用效果。
This paper introduces the cause of the easy aging of sodium silicate binder and the harm of its aging to the sand nature, and puts forward the methods and effects of sodium silicate binder modifying.
这当然会影响树脂基体与玻璃间的良好粘结。
This would certainly militate against good bonding between the resin matrix and the glass.
封盖可选择平行缝焊、钎焊、玻璃熔封或树脂粘结。
The fixing and sealing may choose among parallel - seam welding, braze welding, glass - melting - sealing and resin binding.
涂层由环氧一有机硅粘结剂、铝粉、玻璃料和各种提高热稳定性及耐腐蚀性的添加剂组成。
The coating consists of epoxy-silicon bond, aluminium powder, glass filler and various additives to improve heat stability and corrosion resistance.
目的：探讨利用溶胶凝胶法进行纳米硅涂层表面改性对玻璃渗透氧化铝陶瓷粘结强度的影响。
Objective: Aim of this study was to evaluate the effect of silica coating with sol-gel process on bonding strength between glass infiltrated alumina ceramic and resin luting cement.
广泛适用于粘结各类金属、陶瓷、玻璃、橡胶、耐热塑料和许多其它材料。
The product is suitable for bonding a wide variety of metals, ceramics, glass, rubber, temperature resistant plastics and many other materials.
对于本文研究的夹层玻璃，研究发现，粘结界面极性分量匹配性对粘结强度的影响占主要地位。
For the sandwich glasses studied in this work, results showed that the matching of the corresponding polar parts of bonded interfaces played primary role in the adhesion strength.
分析认为，济钢大板坯连铸机出现粘结漏钢的原因是保护渣的性能不良，其中液渣层厚度、渣耗量及玻璃相比例偏低，以及结晶器液面波动，拉速提升过快等。
Analysis consider that the reason of breakout by sticking is bad capability of the powder, such as lower depth of liquid powder, less consumption and low proportion of glass phase in the powder.
并验证了重复荷载作用下玻璃纤维布与混凝土良好的粘结性能。
It has proved that the glass fibre sheets and the concrete has a good bonding condition subjected repeated fatigue load.
用X射线双晶衍射仪测量了阴极和玻璃热粘结工艺过程中阴极材料外延层和衬底的双晶回摆曲线。
Some double crystal rocking curves of photocathode epitaxy materials and substrates are measured by means of X-ray double crystal diffraction in the bonding process.
在LLDPE的大分子上没有极性基团，它与很多基材如金属、塑料、玻璃和低的粘结力很差。
There is no polar radical on the macromolecules of LLDPE. It has poor adhesion to many substrates such as metal, plastics, glass and paper.
调整挡风玻璃位置直至与凸缘和粘结剂对准。
Adjust windshield glass position until it is aligned with the flanges and adhesive.
提供一种可靠地固定玻璃灯罩而与粘结剂状态无关的具有内置点灯电路的荧光灯及其制造方法。
Provided is a fluorescent lamp with a build-in lighting circuit for fixing glass lamp house reliably without relation with a bonding agent state, and a method for manufacturing the same.
由粘结材料和湿法短切原丝玻璃纤维(WUCS)形成的短切原丝毡的形成方法，它显示出降低的静电出现机率。
A method of forming a chopped strand mat formed of bonding materials and wet use chopped strand glass fibers (WUCS) which demonstrate a reduced occurrence of static electricity is provided.
依据玻璃成型的特点，从金属学和热力学角度，分析了金属与玻璃之间的粘结及金属在高温下氧化对玻璃模具选材的制约。
According to the characteristic of glass molding, such as metallography and thermodynamic, paper analyzes the conglutination between metal and glass at high temperature.
适合于玻璃，铝材，石材，混凝土，砖瓦，陶瓷，塑料间的非结构性粘结密封。
Suitable for glass, aluminum material, stone, concrete, brick, ceramic, plastic, non-structural bonding and sealing.
对不同受热温度下水玻璃旧砂粒上残留粘结剂膜的物理形貌及力学性能进行了较系统的试验研究。
The physical pattern and mechanical property of residual binder film on the used sodium silicate sand under different temperature were studied by the numbers.
研制高性能的玻璃纤维增强聚丙烯复合材料的关键是提高非极性的聚丙烯和极性的玻璃纤维的界面粘结强度。
The key point to prepare glass fiber re-enforced polypropylene composite(PP/GF)is to improve the interfacial strength of non-polar polypropylene and polar glass fiber.
一种由多个玻璃片叠层构成的超薄屏面，这些玻璃片可以涂敷透明的包层物质或可以不涂敷，利用环氧树脂或粘结剂固定在一起。
An ultrathin panel comprised of stacking a plurality of glass sheets, which may be coated with a transparent cladding substance or may be uncoated, fastened together using an epoxy or adhesive.
涂料的粘结剂主要由硅酸乙酯、硅溶胶、水玻璃等组成。
The main constitution of the coating is silica sol sodium silicate ethyl-silicate silica sol, sodium silicate, ethyl-silicate.
保温玻璃棉管壳为离心玻璃棉毡施加酚醛树脂粘结剂加温固化成型的筒状保温管材。
Heat insulating glass wool pipe shell is tubular heat insulating tube cured and formed after heating centrifugal glass cotton pad to which phenolic resin adhesive agent is applied.
在应用粘结剂之后准备安装玻璃，因为粘结剂开始固化至少10分钟。
Be prepared to install the glass immediately after applying the adhesive, as the adhesive will begin to cure in less than 10 minutes.
所以，提高CO2水玻璃砂粘结强度的关键在于抑制硬化过程中胶粒的过于长大。
Therefore, stopping the hardening process of particles from growing is the key of increasing CO2 sodium silicate sand bond strength.
对幕墙基材包括镀膜陶瓷、反光玻璃、 阳极氧化和喷涂铝材以及不锈钢等金属材料均具有卓越的粘结性。
With excellent adhesion to all types of coated ceramic, glass, priming aluminum and stainless steel and so on.
对幕墙基材包括镀膜陶瓷、反光玻璃、 阳极氧化和喷涂铝材以及不锈钢等金属材料均具有卓越的粘结性。
With excellent adhesion to all types of coated ceramic, glass, priming aluminum and stainless steel and so on.
应用推荐