详细介绍了海滩地区现浇梁支架设计及施工情况。
This paper elaborates on the design and construction of cast-in-place beam bracket in the beach region.
详细介绍了海滩地区现浇梁支架设计及施工情况。
The application of full space supports in construction of cast-in-place box beam;
接着介绍了现浇梁支架的施工预拱度计算方法及设置方法。
Then calculating methods on construction camber of cast-in-place beam scaffold and setting methods are introduced.
主要介绍现浇梁脚手架施工，支架验算及要求通车情况下钢管架空贝雷架受力验算。
The construction of cast-in-situ beam scaffolds and supporting bracket calculation are introduced in this paper.
某教学楼钢筋混凝土现浇梁板、承重墙体严重开裂，梁板挠度大幅度超过规范允许值、刚度严重不足，致使建筑物不能正常使用。
The girder board and wall of a teaching floor have crazed, its girder board deflection is over criterion value, its stiffness is insufficiency. The building can not be used ordinarily.
为了保证稳定性，由铸铁构件和厚板梁组成的原有楼层均被由一种新的结构来取代，这种新的结构由新型连接构件和现浇混凝土楼板组成。
So as to maintain stability, the existing floors composed of cast-iron posts and slab beams were methodically replaced by a new structure composed of mushroom posts and concrete floors poured on site.
最后采用的方案是分段现浇的预应力混凝土箱形梁。
The successful alternative was the cast - in - place segmental prestressed concrete box girder.
食物进入一个现浇箱梁。
最后采用的方案是分段现浇的预应力混凝土箱形梁。
The successful alternative was the cast-in-place segmental prestressed concrete box girder.
工程实践证明，运用在系梁上架设现浇箱梁支架的施工方法，能够保证中小桥梁河道通航及泄洪的要求。
As a proof of engineering practice, the method of construction techniques of cast-in-site girder of bridge could ensure the waterway of small and bridge.
使用预制钢筋混凝土梁或者现浇钢筋混凝土板会很容易将两侧地下连续墙的跨度空间连接起来，从而完成隧道的主壳。
The span between two such diaphragm walls can easily be bridged with precast reinforced concrete beams or a cast in-site reinforced concrete slab to complete the main shell of the tunnel.
介绍移动模架施工现浇混凝土连续箱梁的施工工艺，以及在施工中应该注意的事项。
This article gives the construction procedure and instructions for on-site casting of continuous concrete box beam with mobile mould.
介绍汉川汉江公路大桥非连续段箱梁的悬臂现浇施工技术，可供有关工程技术人员参考。
This paper introduces the cast in place cantilever construction technology used in uncontinous box beam of the Hanchuan Hanjiang River Bridge.
最后采用的方案是分段现浇的预应力混凝土箱形梁。
The successful alternative was the cast - in - place segmental prestressed concrete box girder .
现浇钢筋混凝土楼盖边主梁考虑协调扭转的分析和设计方法是工程设计中有待进一步解决的问题之一。
Reasonable analysis and design of the cast-in-place edge girder in reinforced concrete floors taking into account effect of compatible torsion are desirable in engineering practice.
结合某实际工程的现场实验，通过建立精细有限元模型对现浇预应力空心板梁楼盖体系进行了分析。
Based on the full scale experiment of an engineering project, the finite element method was applied to analyze the bonded-prestressed plate-beam system.
结合多年高速公路监理实践，对现浇连续箱梁质量控制关键点进行了详细论述。
Combined with years' expressway supervision practice, the key quality control points for continuous box-beam cast in-site are discussed in detail.
本文对现浇钢筋混凝土梁、板的几种裂缝产生的原因进行了分析，并提出处理方法。
This paper analyses some kinds of fissures in cast in place reinforced concrete beams and slabs, and puts up several methods for dealing with the fissures.
吉水赣江大桥是江西省第一座拱上建筑采用现浇连续板梁式结构，且桥墩为钢筋混凝土空心墩的箱型拱桥。
Ganjiang bridge in Jishui is the first box-arch bridge, which has continuous cast boards and girders construction on the arch and whose piers made from reinforced concrete are hollow.
结合工程实例，介绍大跨度预应力现浇箱梁托架法施工的关键工序、质量检测及控制。
An introduction is given to key construction flow, quality detection and quality control of bracket method for large span prestressed cantilever box beam cast in place.
通过有关检算，结合我单位有关施工经验，确定现浇箱梁满堂支架施工方案。
Through related examines calculated that unifies my unit related construction experience, definite cast-in-place box Liang full house support plan of construction.
通过平顶山市庙洪线西斜立交桥工程实例，介绍了现浇混凝土连续箱梁的具体施工方法，并对施工中的关键工序进行了系统探。
According to the overpass bridge project of Miaohong Line in Pingdingshan, the construction technology of cast-in-situ concrete continuous box beam is introduced.
由于现浇框架梁板共同工作，当梁受扭时，板中必然产生附加弯距，同时板也约束了梁的转动。
When the frame beam works under torsional moment, extra bending moment is to be produced in the reinforce slab because the frame beam and the reinforce slab work together.
主要论述了跨越高速公路现浇箱梁的施工方案设计及施工注意事项。
The paper mainly discusses the design of construction schemes for cast in situ box girder spanning the freeway and the points for attention for construction.
本文介绍了一种现浇连续箱梁外模系统的设计。
The paper introduce one kind of external formwork system design of cast-in-place continuous box beam.
采用的连接方式能将预制墙板、现浇柱及地梁连接成整体。
The adopted connections of the specimens integrate the pre-cast wall panel, the cast-in-site column, and the foundation as an unit.
现浇钢筋混凝土双向密肋空腔楼盖由空心箱体、现浇钢筋混凝土密肋梁、现浇钢筋混凝土框架梁构成，空心箱体与密肋梁同高。
The cast-in-place concrete Fabricated Hollow-ribbed floor is composed by the reinforced concrete beam, the rib beam and the hollow box.
剪力墙模板采用大模板施工工艺，现浇板及梁采用双面竹胶模板施工工艺。
And shear wall moldboards use the construction crafts of the large moldboards. In addition to these, in site cast plates and beams adopt construction crafts of double faced bamboo glue moldboards.
内中环梁现浇明矾。
首先，针对转换层梁模体系及支撑架施工，重点分析了转换层结构现浇混凝土对模板侧压力值及模板对拉螺杆的计算；
The beam shape of concrete transfer floor is completely studied. Firstly, for the system of moulding board and support frame in construction the side pressure and screws are analyzed.
应用推荐