现场总线控制系统是继分散控制系统之后出现的新一代控制系统。
Fieldbus control system is a new generation control system appearing after distributed control system.
网络连通性的动态监测是现场总线控制系统(FCS)的重要方面之一。
The dynamic monitoring of the network's connectivity is one of the important aspects of the Fieldbus Control System (FCS).
本文重点研究了直接面向生产一级的工业化网络系统,现场总线控制系统。
This paper focused on the FCS (FieldBus Control System), one of Industrialization Network Systems facing to manufacture procedure.
由智能传感器和现场总线构成的现场总线控制系统,采用三层线性网络结构。
Based on intelligent sensors and field bus, the three-level linear network was adopted by FCS.
指出基于软件冗余同步现场总线控制系统具有可靠性高,利于国内自主开发等优点。
According to the research work and experience, it points that Software Redundant Fieldbus Control System Based has high reliability and is easy to be developed.
提出一种基于FCS的现场总线控制系统,来实现对化工间歇生产过程的管控一体化。
The paper presents a kind of field bus control system based on FCS to realize integrative management and control system for the intermittent chemical production process.
本文主要论述现场总线和现场总线控制系统的定义、构成、功能、优点、发展趋势和应用。
This article discussed the definition, configuration, function, advantage, development, application of Fieldbus and Fieldbus control system.
本文的研究必将对我国自行研制和使用成本低廉、灵活实用的现场总线控制系统起到积极作用。
We believe it is helpful to develop an economic, flexible and practical control system in our country.
介绍炼油装置生产过程中现场总线控制系统应用,以及控制系统总体设计、控制系统应用软件开发。
The field bus control system was used in the process of oil refining. This system solution was designed and the application software development to this control system was described.
OPC规范和IEC 61499标准在现场总线控制系统中均属于用户层协议,二者都基于组件技术。
OPC specifications and IEC 61499 standard both are protocols of User Layer of FieldBus Control System(FCS), and both are based on software component technology.
现场总线控制系统凭借其开放性,分散性和可互操作性等特点,成为目前工业控制系统研究和应用的主流。
Fieldbus control system (FCS) has become one of the main technologies used and researched in industrial control system for its openness, decentralization and interoperability.
在对SZ绞合成缆机设备组成简介的基础上,设计了基于模糊神经网络的SZ绞合成缆机现场总线控制系统。
After brief introduction of equipments of SZ stranding machine for optical fibers, this paper designs SZ stranding machine field bus control system based on fuzzy neural network.
结合合成氨厂实践情况,从硬件、软件的角度介绍现场总线控制系统FCS的组成、优点及目前存在的不足。
The paler amply introduces composing and advantages, and currently disadvantages of field- bus control system FCS from hardware, and software and application in the plant.
现场总线控制系统是目前自动化领域中的一个技术热点,正受到国内外自动化设备制造商与用户越来越强烈的关注。
The Fieldbus control system is a hot technology in the field of the automation , which is being paid more and more attention by users and automatic equipment manufacturer .
主要阐述JX-300X集散控制系统和基于Profibus现场总线控制系统的教学实训装置的基本构成、功能和应用。
This paper introduces the basic composition, function and application of teaching and practical training device composed of JX-300X DCS and FCS based on PROFIBUS.
该方案符合现场总线控制系统的基本设计思想,比较适合于当前变电站自动化系统的应用,可在很大程度上提高系统的设计水平。
The system is in the line with the basic design concepts of field bus control system and suitable for the application in ISAS. It raises the system design level greatly.
在工业过程控制技术上,从分布式控制系统(DCS)走向现场总线控制系统(FCS)是已经在进行并必将由后者取代前者的过程。
The industrial process control technology is just under the shift from DCS to FCS, and the latter will surely replace the former.
论文叙述了变频调速技术在现场总线控制系统中的应用。介绍了该FCS的硬件配置、控制策略组态方案和采用变频调速技术的节能原理。
This paper describes the application of Variable Frequency Device in FCS. The hardware configurations and control strategy configurations of FC$ and the principle of VFD are introduced.
根据现场总线控制系统和柴油机试验流程特点,提出了柴油机试验流程现场控制方案,以及采用SHCAN 2 0 0 0系统的设计与实现。
According to the character of FCS and diesel engine testing process, we present the scheme of process controlling in the field, and its realization adopted SHCAN2000.
介绍了笔者参与研发的一套用于大型火力发电厂生产过程控制的现场总线控制系统的基本功能和整体结构,着重描述系统研发中的两项关键技术。
A set of FCS which the author has developed as a participant was introduced by describing its basic functions and entire structure while emphasizing two key techniques.
根据管控一体化系统特点,提出了CAN现场总线和以太网综合应用的控制方案,以及采用SHCAN 2000型现场总线控制系统的设计与实现。
According to the character of integration system of management and control, we present the scheme of process controlling of CAN field -bus and Ethernet, and its realization adopted SHCAN2000.
结合管控一体化系统特点,提出了CAN现场总线和以太网综合应用的控制方案,以及采用SHCAN 20 00型现场总线控制系统的设计与实现。
According to the character of integration system of management and control, this paper presents the scheme of process controlling of CAN field-bus and Ethernet, and its realization adopted SHCAN2000.
PLC及变频器是该系统的重要组成单元,各单元之间通过现场总线PROFIBUS-DP组成冶金原料吊车的控制系统。
PLC and transducer are the cell of systemic import, track PROFIBUS-DP constitute the control system of metallurgy stock crane.
论述了基于PROFIBUS-DP现场总线的浮法玻璃生产线的PLC双冗余控制系统结构、硬件组态以及软件实现情况。
The PLC double redundant control sys- tem structure , hardware configuration and software running status were described on the basis of PROFIBUS-DP field bus on float glass line .
它是一种利用多媒体计算机、CAN现场总线和微控制器组成的一种新型的分布式多媒体控制系统。
A new type distributed multimedia control system, which utilizes multimedia-computer, CAN BUS LINE, and micro-controller is introduced.
详谈系统的体系结构,与其它现场总线的集成,与传统DCS、PLC系统的集成以及远程控制系统组成等。
The architecture of the system and its integration with other field bus, conventional DCS, PLC systems and the composition of telecontrol system are described in detail.
详谈系统的体系结构,与其它现场总线的集成,与传统DCS、PLC系统的集成以及远程控制系统组成等。
The architecture of the system and its integration with other field bus, conventional DCS, PLC systems and the composition of telecontrol system are described in detail.
应用推荐