根据提出的直廓环面蜗杆优化设计的原则和目标。
The paper put forward principle and object of straight profile circular plane worm's optimization design.
提出了一种新型滚动式球面包络点啮合环面蜗杆传动；
A new rolling type of spherical enveloping worm gearing with point meshing is proposed.
本文扼要阐明了“渐开面包络环面蜗杆付”的加工原理。
This paper briefly expounds the manufacturing principle of the worm-gear pair with the involute envelope fair.
本文运用复合形法解决了直廓环面蜗杆各种修形的参数优化。
The parameter optimization of various general type is achieved by applying compound form method.
提出了平面二次包络环面蜗杆副可制造性评价的内容和方法。
The evaluation contents and relevant methods are proposed for the manufacturability of plane-generated double enveloping Hourglass worm gear pairs.
直齿廓环面蜗杆或者二次包络环面杆蜗，均需进行修形加工。
It is necessary for both straight profile toroid worm and double enveloping toroid worm to be pruned on the faces of teeth.
介绍了新型二次包络环面蜗杆副测量仪的结构、原理及实测结果。
The measuring principle, main structure and measured results of the new tester developed for double enveloping worm gearing are present in the paper.
TI蜗杆由渐开线斜齿轮包络形成，与斜齿轮组成一种环面蜗杆传动。
TI worm drive is a novel kind of hourglass worm, which consists of involute helical gear and enveloping hourglass worm.
本文提出了用小圆柱面砂轮磨削直廓环面蜗杆的新方法，建立了数学模型。
In this paper a new grinding method, using small cylindrical face grinding wheel to grind straight outline hourglass worm, is put forward and the mathematical model is set up.
针对平面二次包络环面蜗杆传动，运用优化理论和方法，对其进行了优化设计。
The optimum design of plane quadratic enveloping ring surface worm drive has been realized using the theory and method of optimization.
提出了对二次包络环面蜗杆传动修形的方法，以降低蜗轮副对制造误差的敏感性。
A method of modifying the double enveloping worm gearing with developable tooth surface has been proposed to reduce the sensibility of the worm gearing to the manufacturing errors.
基于微分几何和空间啮合理论，分析了修正型圆环面双包络环面蜗杆副齿面形成原理。
Analysis of the forming principle of tooth flank of modified type worm gear pair was based on different geometry and spatial engaging theory.
推导了双圆环面包络环面蜗杆磨齿啮合界线方程及其与相配蜗轮啮合的啮合界线方程。
The equations of the meshing limit line in the first and second enveloping of the dual-torus double-enveloping toroidal worm drive are presented in this paper.
阐述了一种新型环面蜗杆传动——无侧隙双滚子包络环面蜗杆传动的结构和传动原理。
The structure and the working principle of a new kind of hourglass worm gearing, which is called non-backlash hourglass worm gearing, are introduced.
推导了双圆环面包络环面蜗杆磨齿啮合界线方程及其与相配蜗轮啮合的啮合界线方程。
Equations for describing the tooth surface of a face-gear were established, and the contact path was formed by differential geometry and meshing theory.
分析了砂轮磨损对准平面二次包络环面蜗杆传动的蜗杆几何尺寸以及接触和运动精度的影响。
It analyzes the influence of the grinding wheel wear on geometric size and teeth contact of worm gear, kinematics precision of the quasi-plane double enveloped hourglass one.
机电集成； 超环面传动；定子加工； 环面蜗杆加工；曲线梁；最小能量法；效率。
Electromechanical integrated; Toroidal drive; Manufacture of the stator; Manufacture of the toroidal worm; Curved beam; Minimum energy method; Efficiency.
研究了平面包络环面蜗杆啮合齿面方程，并探讨建立基于网格矩阵的啮合型面的矩阵模型方法。
The meshing surface equations based on gridding metrics are studied and a method to set up the solid model is discussed in this paper.
本文全面论述了环面蜗杆滚子蜗轮传动的啮合原理、啮合参数及其强度，并提供了设计计算公式。
This paper discusses the mesh theory, mesh parameters and strength of ring worm and roller worm gear drives, and provides the calculation formulas for the design of this kind of drives.
使用实践证明，在相同的使用条件下，平面二次包络环面蜗杆传动副的传动性能比普通蜗轮蜗杆传动副好。
It has been proved by practices that the double enveloping worm gearing transmission is superior to the ordinary worm gearing transmission under the same condition.
从优化的原理、目标和方法出发，成功地编制了直廓环面蜗杆的优化设计程序，并对优化结果作了举例和比较。
Based optimization principle, object and method, the optimization design programme is worked out, illustrating and contrasting with the result.
同时结合齿轮测量中心的测量方式和环面蜗杆的特点，确定了对环面蜗杆误差项目的测量方法，并分析了测量时的运动控制策略。
At the same time, combine with the measure method of gear measuring center and the character of hourglass worm the method of error measurement is fixed.
平面二次包络环面蜗杆副这种优良的传动形式一直不能得到广泛应用的原因就在于其设计参数多、加工工艺复杂，并且对误差很敏感。
The reason of such fine transmission form can not be used widely of two packs of worm pairs lie in their design parameter more, complicated processing technology and very sensitive to the error.
本文以斜平面二次包络环面蜗杆副为研究对象，在空间啮合理论的基础上，推论出三参数修正的啮合方程、接触线方程、蜗轮齿面方程。
In this thesis, planar double-enveloping worm gear pairs is the research object, combined with space Meshing theory, derived from the multi-parameter modification of the mesh equation.
本文建立了滚锥包络环面蜗杆传动蜗轮的变形协调条件，给出了该种传动受力分析的计算公式以及蜗轮与蜗杆之间滚滑摩擦系数计算公式；
The deformation coordination equation of worm gear for rolling cone worm gearing is introduced, and the formulae of forces analysis and the rolling - and - sliding friction coefficient are given.
研究了机电集成超环面传动的驱动机理，建立了该传动的空间力学模型，分析了行星轮在环面蜗杆和环面定子处的受力情况，推导出了行星架输出力矩的计算公式。
The spatial force model of the drive is presented. Forces between planet and worm or stator are analyzed. The formula of the output torque for the drive is given.
本文研究了一种新型行星传动——滚锥齿超环面行星蜗杆传动。
The paper researches a new type mechanical transmission mechanism-the Rolling cone-type toroidal drive.
蜗杆与蜗轮均为硬齿面，适于动力传动的新型环面蜗轮副。
Such a new type of hourglass worm pair is particularly-favorable for power transmission.
给出了超环面行星蜗杆传动啮合效率、齿面磨损量和弹流油膜厚度的分布规律及其随传动参数的变化规律。
The distribution of engaging efficiency, EHD oil film thickness and tooth face wear and their changes along with transmission parameters are presented.
渐开面包络环面内螺纹蜗杆砂轮磨齿，是一种硬齿面齿轮精加工的新型工艺。
Grinding gear with the toroidal involute interior thread worm grind wheel is a new kind of process in hard surface gear finish machining.
应用推荐