制得柔性环氧丙烯酸酯预聚体。
研制了一种紫外光固化环氧丙烯酸酯涂料。
介绍了环氧丙烯酸酯类U v固化光纤涂料。
In this paper, an epoxy acrylates UV curable coating for optical fiber was reported.
开发了一种用半酯法合成环氧丙烯酸酯型光敏涂料的方法。
The synthesis of epoxy acrylate type photosensitive coatings were developed by semi-ester method.
合成了既有环氧基团又含不饱和双键的环氧丙烯酸单酯树脂。
A dual-curing epoxy monoacrylate resin was synthesized, which contain both epoxide groups and unsaturated double bonds.
在不同阻聚剂用量、投料比、投料方式等条件下合成环氧丙烯酸酯。
The epoxy acrylate was synthesized with different amounts of inhibitor, feed ratios and feeding modes.
用FTIR对环氧树脂和合成的环氧丙烯酸树脂的结构进行了表征。
The structures of epoxy resin and synthesized epoxy-acrylic resin are characterized by FTIR.
研究了氧化剂、还原剂以及温度对环氧丙烯酸酯胶粘剂性能的影响。
The effect of the oxidant, the reductant, and the temperature on the performance of the adhesive were investigated.
研究了氧化剂、还原剂以及温度和放置时间对环氧丙烯酸酯胶粘剂性能的影响。
The effect of the oxidant, reductant, temperature and the time of placement of felted sample on the performance of the adhesive were investigated.
实验结果表明:改性环氧丙烯酸酯可以明显改善体系收缩率,稀释剂对收缩率有影响。
The results showed that the shrinkage of system were improved obviously by adding modified epoxy acrylic ester, and the diluent had effect on shrinkage.
通过环氧丙烯酸树脂和双羟基化合物反应,获得具有亲水性链段的水性环氧丙烯酸酯。
The epoxy acrylates oligomer with hydrophilic links and end waterborne modified-epoxy acrylates resin was prepared.
用新型绿色溶剂取代传统的二甲苯等有毒溶剂,并对环氧丙烯酸树脂的合成工艺进行改进。
Such traditional poisonous solutions are replaced with dimethylbenzene to improve the synthesis technology of epoxy acrylic resin.
环氧丙烯酸(EA)树脂在辐射固化领域中是一种重要的感光树脂,其中双酚A型环氧树脂的应用最为广泛。
Epoxy acrylate (EA) resin is an important photosensitive resin, in which bisphenolic epoxide was most widely used in the field of UV curing coating.
本文以丙烯酸和F - 44环氧树脂为原料,合成了一种既含有环氧基又含有丙烯酸基的光敏酚醛环氧丙烯酸酯树脂。
The title photosensitive phenolic epoxy acrylate resin has been prepared based on acrylic acid and F-44 epoxy resin as basic materials, which contains epoxy as well as acrylic groups.
这种分散体系可作为一种紫外光固化水性涂料,其涂膜的耐磨性、柔韧性都比环氧丙烯酸酯涂膜增强,而硬度变化不大。
These dispersions can be used as waterborne ultraviolet-curable coatings, the abrasion and flexibility of their film are better than that of epoxy acrylate coatings, but the hardness decrease little.
以环氧丙烯酸酯、活性稀释单体、光引发剂等为原料,制备UV固化涂层,对主要原料及固化后的涂层进行了热失质量分析。
The title UV curing coatings is prepared based on epoxy acrylate, reactive diluents and photoinitiator. The main raw materials and cured film are tested with TGA.
采用双酚A环氧丙烯酸酯(EA)和聚氨酯丙烯酸酯(PUA)共混,加入活性稀释剂、光引发剂、颜料等制备了紫外光固化光纤涂料。
The UV curable coating of fiber ribbon was prepared by blending bisphenol A epoxy acrylate(EA) and polyurethane acrylate(PUA)and adding reactive diluent, photoinitiator and pigment.
研究了以环氧丙烯酸酯、丙烯酸活性单体、光敏剂以及涂料助剂配制而成的紫外光固化纸张罩光涂料,并分析了影响涂料性能的几种主要因素。
An UV-curing paper finish coatings has been prepared based on epoxy acrylate, acrylic monomers, photosensitizer and additives. Factors influencing the coating properties are discussed.
采用E-44环氧树脂与丙烯酸反应,用鎓盐作催化剂,制备了适于配制竹木基涂饰的紫外光固化的环氧丙烯酸酯预聚物,讨论了催化剂的种类对合成反应的影响。
The UV-curable acrylated epoxy prepolymer resin was prepared by reacting E-44 epoxy resin with acrylic acid in the presence of onium salt catalyst.
弹性环氧面漆和弹性聚酯改性丙烯酸聚氨酯面漆等。
Elastic epoxy paint and elastic polyester modified acrylic polyurethane top coat.
讨论了聚氨酯-丙烯酸酯的乳化机理,及其对环氧-丙烯酸酯水分散体系稳定性及涂膜性能的影响。
The emulsification mechanism of polyurethane-acrylate and its influence on stability of epoxy-acrylate aqueous dispersion and film properties are discussed.
研究了以钼醇配合物为催化剂,过氧化氢异丙苯为环氧化剂,乙醇为溶剂的丙烯一步氧化制环氧丙烷的反应。
The epoxidation of propylene to propylene oxide, using cumene hydroperoxide as oxidant, molybdenum glycol complex as catalyst and ethanol as solvent, has been investigated.
采用腰果壳油改性环氧酚醛树脂漆,对不经表面处理的聚丙烯塑料坯胎进行涂饰,具有良好的附着性、干性、硬度和光泽。
A cashew shell oil modified epoxy phenolic paint has been developed, which can be applied on the untreated polypropylene surface with good adhesion, high hardness, fast curing and glass.
利用分子氧为氧化剂进行丙烯的环氧化反应是最理想的反应,同时也是世界催化领域内最具挑战性的课题之一。
Propylene epoxidation with molecular oxygen as the oxidant is the most desirable reaction and is one of the most challenging topics in catalysis.
用丙烯酸和环氧树脂合成了丙烯酸环氧酯。
Epoxy acrylate was synthesised by reacting epoxy resin with acrylic acid.
以醋酸丙烯酯为原料制造环氧氯丙烷的新路线,具有反应条件缓和、产品收率高和副产物少的特点。
Using allyl acetates as raw materials the new route for the manufacture of epichlorohydrin is characterized by mild reaction conditions, higher yields and less by-products.
介绍了环氧大豆油在阳离子光固化体系、环氧豆油丙烯酸酯涂料及其他涂料体系的研究状况,并对其应用前景进行了展望。
The study progress on cationic UV-curing, acrylated epoxidized soybean oil and other coatings systems were also reviewed briefly, moreover, the applications in future was predicted.
介绍了环氧大豆油在阳离子光固化体系、环氧豆油丙烯酸酯涂料及其他涂料体系的研究状况,并对其应用前景进行了展望。
The study progress on cationic UV-curing, acrylated epoxidized soybean oil and other coatings systems were also reviewed briefly, moreover, the applications in future was predicted.
应用推荐