仿真结果表明，这种方法具有很好的抗发散性，而且状态及参数估计精度也很高，是一种行之有效的异步电动机参数的动态辨识方法。
The results of simulation is shown that this method has high accuracy and good convergence, and it is an effective parameter identification method of induction motors.
可以查看系统的拓扑结构、系统状态参数、当前负载情况、请求延迟记录、内部事件及通知等信息。
Shows system topology, status, current load, trailing and average latency, events and alerts.
找出了高速大功率柴油机曲轴在自然放置状态下的渗氮畸变规律，分析了曲轴的形状及渗氮工艺参数对曲轴畸变的影响。
The distortion law of high-speed diesel crankshafts during nitriding was studied. The influence of crankshafts shape and nitriding process parameters on the distortion was analyzed.
液晶显示模块直观的显示系统各种参数及状态。
The LCD module shows parameters and the state signal of system.
残余应力分布状态及表面租糙度是评定加工表面层质量的两个重要参数。
Residual stress profile state and surface roughness are the two important parameters for evaluating machined surface layer quality.
通过振动铲斗激振力及检测铲斗工作状态下的加速度或位移，利用合适算法能够较好地辨识出被掘削土体参数。
According to the vibratory force, acceleration or displacement of the bucket, which are measured in working state, the reasonable identification algorithm of soil parameter is also presented.
再根据传感器检测的停车设备运行状态及车库结构参数，组织专家系统的综合数据库。
Then, the synthesis database of expert system is established according to the running status of parking equipments which detected by sensors and garage structure parameters.
根据中国大陆及周围地区的速度场，估计了8个块体的应变参数，分析了这些块体的应变状态。
Based on the velocity fields in Chinese continent and its peripheral areas, the strain parameters of 8 blocks are estimated and their strain status also analyzed.
并得出在采样气体状态参数和环境条件一定时，除尘效率的测定误差主要取决于取样时间及流量。
Under a definite gas state parameter and environment condition, the measurement deviation was correlated with the sampling time and the flow rate.
同时对恒沸状态的温度、压力及组成等参数亦进行了相关计算。
In addition, the parameters under the azeotropic state such as temperature, pressure and composition were calculated.
在平均场近似下求出的状态方程包含了动态斯塔克效应及弛豫时间参数。
The two-photon equation of state including dynamical Stark shift and relaxation parameters is obtained and studied under mean-field approximation.
讨论了参数空间设计的基本过程，给出了容错状态及输出反馈控制律的设计方法。
Thedesign method for a fixed state or output feedback law which results in fault-tolerance is given out with the parameter space design procedure being briefly introduced.
“新风”处理终状态的确定应根据室内、外气象参数的取值，新风系统设置方式及规模等实际情况来确定。针对新风系统处理方案和风机盘管机组的选用提出见解，供同行参考。
The definition of Xinfeng final treatment conditions should be acquired value by inner and outer meteorological parameters, the setting mode and scale, and other reality conditions of Xinfeng system.
实现了对按键状态、参数采样和判定、输出及通信的有效控制，顺利地完成了由直流到交流的转换。
We can realize the control to the button state, Sampling and determine for parameters, the output and communication. And can complete the DC to AC conversion smoothly.
本文表述的是，同步循环状态下系统热平衡，及在热平衡条件下循环空气热力参数和性能参数的模拟计算。
Text formulation turn out, at synchronism circulate state system heat balance; and analog computation on heat balance condition circulating of air heat power parameter and performance parameter.
该模型易于实现、实时性较好、能够克服低速状态下定子电阻变化及系统参数变化的影响。
This model is carried out easily to avoid the harmful influence of the change of stator resistance and system parameters under low speed situation.
永磁同步电动机的参数及状态估计是提高控制性能的基础。
Parameter and state estimation is the basis of improving the performance of a permanent magnet synchronous motor (PMSM).
根据电弧电压偏差信号及电弧状态，设计了四个控制规则及其控制参数的计算方法。
According to the signals of arc voltage errors and arc state, four control regulations and counting measure of control parameters are designed.
综合相图、相律及相平衡关系，分析精溜操作中的状态参数，使抽象的相平衡内容具体、直观。
Approaching the parameters of distillation operation through phase law and diagrams, the relation of vapour-liquid equilibrium shows directly.
最后，改变溶液入口参数及吸收压力，相应的吸收情况有所改变，其趋势与静止状态下的降膜吸收非常一致。
Finally, falling film absorption changes with the solution parameters at inlet and system pressure and the change trend is very similar to what happened in the static tube.
本文主要研究服装热舒适性特征的描述方法，小气候状态参数的测定法及真丝绸服装的热舒适性特征。
The paper studies the thermal Comfort characteristic of the silk fabric and the comfort, The method of expressing the misscroclimate parameters.
由于结构性、初始各向异性和复杂的应力路径的共同影响，往往使极限状态设计如何确定天然土体渐进破损的强度及参数变得复杂而困难。
The mutual effects of the structure, initial anisotropy and complex stress path make it complicated and difficult to determine the progressive destructive strength and parameters of natural soils.
因此，肺动脉狭窄对血液流动状态及相关血液动力学参数产生了重要的影响。
Thus, the stenosis of pulmonary artery resulted in important effect on the blood flow condition and the corresponding blood dynamic parameters.
模型提供水泥初始水化历程的热学参数及结构形成参数，将化学反应进程与结构形成的物理状态结合起来。
The H-E model provides the thermal parameter and the structure forming parameter of cement initial hydration, which combines the chemical reaction course and physical state of the structure forming.
“新风”处理终状态的确定应根据室内、外气象参数的取值，新风系统设置方式及规模等实际情况来确定。
The definition of Xinfeng final treatment conditions should be acquired value by inner and outer meteorological parameters, the setting mode and scale, and other reality conditions of Xinfeng system.
随着数字式弹载计算机的使用，自动驾驶仪能够很方便地实现系统变参数设计，在不同的马赫数及不同的飞行状态下，通过弹载计算机的解算来实时装订系统参数。
But now the parameters of digital autopilot system can be easily designed, changed and loaded at real-time, at different flying states and at different Mach Numbers by missile-borne computer.
研究显示参与者策略选择的稳定性受博弈系统最初状态及支付矩阵相关参数的设定有关。
The result shows that the stabilization of participants' strategies is related to the parameters in payoff matrix and influenced by initial status of the game system.
本文提出了一个新的三参数流体状态方程，并给出了三个参数与流体临界性质及温度之间的关系式。
A new state equation with only three parameters is proposed. The expressions for correlating the parameters with the critical properties of the fluid and the temperature are derived.
根据试验结果，确定了标准砂的临界状态线及临界状态参数。
Then, the critical state lines are provided based on the test results of different stress paths.
根据试验结果，确定了标准砂的临界状态线及临界状态参数。
Then, the critical state lines are provided based on the test results of different stress paths.
应用推荐