加速度计频率特性误差是最主要的误差来源。
The step friction torque is the main source for the stabilization error.
通过理论和试验方法对测试系统的特性误差进行了分析。
The system characteristic errors are analyzed by theoretic and experimental methods.
数字补偿器对加速度计频率特性误差做出修正后，测量精度得到明显提高。
The precision can be improved by applying an appropriate digital compensator to the accelerometers.
对线加速度计辅助惯性姿态角测量的误差分析表明，测量误差由加速度计噪声、二次积分离散化、信标噪声和加速度计频率特性误差组成。
The error analysis shows that the measurement error is caused by the noise of the accelerometer, discrete double integration, noise of beacon and frequency characteristic error.
每一转换器都具有误差遥测特性和各种故障保护特性，包括连续的短路保护(自动恢复)输出特性。
The unit includes remote error sensing and numerous fault protection features, including continuous short circuit protection (with automatic recovery), output.
通过误差矩阵和模具的工作特性函数反求输入控制量是加工高精度的自由曲面光学镜所面临的难题。
It is a difficult problem to solve the inputted data when the matrix of error data and the working characteristics of the tool are known in precision machining.
针对焦炉火道温度在线检测的问题，在分析焦炉火道温度特性的基础上，建立了一种基于误差预测的高精度焦炉火道温度软测量模型。
The features of coke oven flue temperature are analyzed, and a highly accurate soft-sensing model based on error forecasting is established to measure the coke oven flue temperature on-line.
在许多应用中，初始误差是最重要的特性。
In many applications, initial error is the most important specification.
动态滞后误差的大小不但与跟踪系统有关，还与目标运动特性有关。
The amount of the dynamic lag errors not only is concerned with the tracking system, but also concerned with the moving characteristics of target.
由于系统方程是时变的，在测量过程中，系统噪声和观测噪声的统计特性等很难精确地估计或测定，事实上很多误差模型都不能简单的设为白噪声。
Because the system equation is changed with time, during the measurement, the statistic character of the system noise and the observation noise cannot be estimated or be determined accurately.
我们又进一步研究了由于网络节点特性变化所引入的误差对检测精度影响，讨论了在一定检测精度要求下，这种光纤补偿网络的优化设计。
We have also discussed the influence of the variation of the characteristic parameter on the measurement error and shown a design of the network.
该文讨论了模糊系统的数字逼近特性，同时分析了逼近误差和初始状态误差对模糊系统的影响。
In this paper, the numerical approximation characteristics of fuzzy system are discussed, and the influence of approximation error and initial state error on fuzzy system are analyzed.
本文主要研究力矩电流产生器的频率特性和误差分析，同时根据实验结果评价了它的性能。
This paper investigates mainly frequency characteristic and error analysis, evaluates the performances of the torque current generator according to experimental results.
在分析和研究加速度计动态输出的基础上，综合了加速度计仿真模型和三轴转台数学模型以及测试误差的特性。
Based on analysis and study the dynamic output of accelerometer, simulating model of accelerometer, mathematical model of three-axis turntable and the characters of test errors are synthesized.
讨论了高准确度测试仪表的质量指标，并分析了数字式智能仪表的结构、静态特性修正和测试误差修正。
In order to demarcate the other testing instrument the paper analyzes a digital intelligent instrumentation including its constitution , static characteristic revision and temperature error revision.
描述了实际灌装量随机误差的特性。
The property of random errors of filling quantity was described.
通过改变CVT中压变压器绕组的布置方式，可降低其直流电阻，从而改善负载误差特性。
Through a reasonable winding arrangement of CVT, the DC resistance can be reduced largely, hence the on load error characteristic can be improved.
传感器特性漂移会给气体的测量和识别带来误差。
When drift exists, the gas measurement or identification result may cause error.
本文分析了由此而产生的射击误差的特性，计算方法及其对高炮系统射击效率的影响。
In this paper, the characteristic of the firing er-ror, its calculating methods and its effect upon fire efficiency are analyzed.
文章阐述了几种组合互感器的特点，介绍了组合互感器的误差特性。
The characteristics of some kinds of packet transformers were elaborated, and the error property of packet transformer was introduced.
计算关联式具有较高的精度，热力学参数计算误差小于1% ，迁移特性参数误差小于4 %。
The calculation shows a high accuracy while the error is low than 1% in thermodynamic properties and 4% in thermophysical properties.
讨论与分析了测边后方交会点的精度问题，同时给出了点位误差特性曲线图。
This paper discusses and analyzes the accuracy problem of linear-resection points. At the same time, the property graph of point position error is given.
计算关联式具有较高的精度，热力学参数计算误差小于1 %，迁移特性参数误差小于4%。
The calculation shows a high accuracy: the error is less than 1% in thermodynamic properties and 4% in thermophysical properties.
这种误差对传动系统的精度与动态特性(特别是振动与噪声)有直接的影响。
It directly influences on the accuracy of drive systems and dynamic characteristics, especially vibration and noise.
这种方法的误差取决于幅频特性曲线的标定精度。
The error depends on the calibration accuracy of the amplitude response.
还分析了该误差补偿系统补偿算法的收敛性和动态特性。
Meanwhile, the paper analyzes the astringency and dynamic characteristic of the arithmetic of the compensation system.
本文提出了一种利用外测弹道数据特性判断后效段时间，进行后效误差分析的方法。
After estimation of the after-effect time using tracking measurement trajectory data, a method is proposed to analyze after-effect error.
这类系统利用一个动态补偿器，保证了干扰作用下系统输出的稳态误差为零，且动态特性满足设计要求。
This system employs a dynamical compensator, which can ensures the steady-state output error under disturbances to be zero, satisfying the dynamic requirements.
这类系统利用一个动态补偿器，保证了干扰作用下系统输出的稳态误差为零，且动态特性满足设计要求。
This system employs a dynamical compensator, which can ensures the steady-state output error under disturbances to be zero, satisfying the dynamic requirements.
应用推荐