物理模拟卡车和拖车耦合(选项)。
上述诸原理共同组成物理模拟能量原理。
Energy principles for physical simulations consist of all aforementioned principles.
钢液物理模拟的主要方法是水力学模拟。
The liquid steel physic simulation usually is water simulation.
典型应用包括信号处理、密集的物理模拟及某些数据处理。
Some example applications are signal processing, intensive physics simulations, and some kinds of data processing.
用数值模拟、物理模拟和纯经验相关法等需要大量的已知条件。
Many known conditions are required when using numerical simulation, physical simulation, pure experimental correlation method and so on.
物理模拟驱油实验表明微生物提高采收率幅度可达到6.7%。
Physical simulation of oil displacement indicates that oil recovery factor is increased by (6.7%).
采用物理模拟的方法，对离心中间包净化钢液的动力学进行了考察。
The dynamics of purifying the liquid steel by centrifugal flow tundish was studied through physical simulation.
利用物理模拟技术制作了一组微弱胶结、非固结高孔隙度人造样本。
The synthetic unconsolidated samples with weak cementation and high porosity were prepared using physical simulation technique.
而物理模拟虚功原理及余虚功原理是物理模拟能量原理的统一理论。
And the virtual work and complementary virtual work principles for physical simulations are united theories of the energy principles for physical simulations.
最后一个明显的改变就是足球物理模拟，它正经历着翻天覆地的变化。
The final instant realization of change had to be ball physics, which have undergone a massive transformation.
基于该工艺过程的物理模拟研究，分析了有关参数对精炼过程的影响。
Based on some studies of physical modeling for the process, the effects of the related parameters on the process were analyzed.
如果为物理模拟使用刚体，有一些重要的信息，在刚体页面阅读缩放属性。
If you are using Rigidbodies for physics simulation, there is some important information about the Scale property to be read on the Rigidbodypage.
我们都感受到了足球物理模拟的毛病，以及球员可以做反常规物理的动作。
Here we realized the flaws of the ball physics and general rules a player could break.
城市街谷大气环境主要研究方法包括外场观测、实验室物理模拟和数值计算。
The main methods for studying the atmospheric environment in street canyons include field observations, reduced-scale physical models and mathematical models.
对船舶轴系非对中时中间轴承振动问题，通过数值模拟和物理模拟进行了研究。
In the paper the problem about the middle bearing vibration of ship shifting with misalignment is studied by the measures of numerical and physical simulation.
利用火烧油层燃烧管物理模拟技术，对胜利油区河口油田稠油进行了湿式燃烧实验。
Incorporating physical simulation on pipe for formation combustion, heavy oil formation of Hekou oilfield, Shengli oil province has undergone wet combustion test.
针对顶板岩层对煤体冲击的影响作用机理，采用实验室物理模拟试验、UDEC4。
Aiming at the influence effects of roof stratum on rock burst, the research methods of physical simulation experiment in laboratory, UDEC 4.
如果这个属性开启，布料只会在任意相机中可见时模拟。这样可改善物理模拟的性能。
If this is enable, the cloth will only be simulated, while the cloth is visible to any camera. This can improve performance of the physics simulation.
人类的视觉系统物理模拟是一个特别困难和复杂的问题，但很有必要从一切方面来研究。
The physics simulated of the vision system of man is a question of special difficulty and complicated, it is necessary to research from all respect.
从热稳定性、降粘性能、原油馏分分析、物理模拟试验方面对化学添加剂进行了性能评价。
Performance of chemical additives has been evaluated from thermal stability, viscosity reducing, oil fraction analysis and physics simulation test.
对铣削过程模拟中的两个关键技术———几何模拟技术和物理模拟技术进行了归纳和分析。
The two key techniques of milling process simulation, i. e. geometric simulation technique and physical simulation technique, are summarized and analyzed in this paper.
因此提出极近距离薄煤层群联合开采常规错距开采模型，并进行理论和物理模拟试验研究。
Therefore, the conventional staggered distance model of ultra-close thin coal seam group during combined mining is put forward; and the theoretical research and physical simulation are carried out.
本文对四段全控桥电路在整流、逆变工况的微机实时控制进行了理论阐述和物理模拟试验。
This paper concerns the microcomputer-based real-time control of four-step controlled bridge which works both in the mode of rectifier and inverter.
本文讨论了动力装置控制系统动态试验设备的重要性并进行了半物理模拟试验设备的方案论证。
In this paper a discussion is made of the importance of the dynamic experimental stand of a power device control system, and of the semi-physical simulating test.
采取实验室物理模拟的方法，对新型的脉冲旋转搅拌喷吹与原单向搅拌的效果进行了对比实验。
Simulation experiments for hot metal desulfurization in laboratory with impulse and rotary stirring-injection method were carried out and compared with existing one-way stirring.
采用物理模拟和数值模拟相结合的手段，对汽车花键轴的温热控制精锻工艺进行了深入的研究。
Warm-hot control forging process of automobile spline shaft is investigated by using physical simulation and numerical simulation.
本文采用数值模拟并结合物理模拟两种手段对生物聚台物溶液中悬浮微粒的驱油渗流动态进行了探讨。
By means of physical and numerical simulation, this paper studies the kinetic process of oil displacement by suspended particles in biopolymer solution.
焊接数值模拟具有系统、灵活的特点，但其结果需进行物理模拟验证，才可应用于实际结构的生产中。
The numerical simulation has the advantage of systematization and flexibility, but the results must be verified through physical tests before they are used as instructions for real fabrications.
焊接数值模拟具有系统、灵活的特点，但其结果需进行物理模拟验证，才可应用于实际结构的生产中。
The numerical simulation has the advantage of systematization and flexibility, but the results must be verified through physical tests before they are used as instructions for real fabrications.
应用推荐