试验结果表明，添加聚丙烯纤维有助于改善材料的模压性能，但导致材料物理力学性能下降。
The test results showed that adding virgin PP fiber could improve molding performance of the composite, but made the physical mechanical properties reduced.
研究了加速老化试验对经不同装饰后的脲醛胶中纤板物理力学性能的影响。
This article studies the impact of the accelerated aging test to UF MDF decorated by different material about physical and mechanical properties.
通过XRD、TG -DTA、SEM及材料的物理力学性能等试验，较系统地研究了高掺量粉煤灰烧结砖煅烧过程。
The firing process for fly ash sintered brick with high additives has been systematically studied through tests of XRD, TG-DTA, SEM and physical mechanical properties for material.
试验结果表明：厚芯竹帘胶合板的物理力学性能达到JG／T3026—1995竹胶合板模板标准的要求。
The experiment results showed that the main physical and mechanical properties of the plywood could meet the requirements for bamboo plywood form specified in JG/T3026 - 1995.
对不同受热温度下水玻璃旧砂粒上残留粘结剂膜的物理形貌及力学性能进行了较系统的试验研究。
The physical pattern and mechanical property of residual binder film on the used sodium silicate sand under different temperature were studied by the numbers.
对杉木边皮劈制的木条进行PS L法制板试验，测试其物理力学性能，分析了制板参数，选择了较佳的工艺。
Conduct board manufacturing experiments on cleaved bark slat of Chinese fir by PSL method to test its mechanical properties, analyze board manufacturing parameters and choose better techniques.
采用试验用热压机对速生杨木进行热压处理，比较不同条件下压缩对试材主要物理力学性能的影响。
In this test, through comparing the different effect of hot-press treatment on physical and mechanical behavior, treatment of poplar wood on hot press is adopted.
通过对不同位置的桩间土的物理力学性能的试验比较，表明人工成孔挤密灰土桩对桩周土的挤密效果不明显。
The compaction effect of artificially drilled lime-soil pile is not obvious comparing test results of soils between piles at different position.
通过流化剂组分对自流平砂浆的流平性能及物理力学性能影响的试验研究，研制出一种砂浆用的高效自流平流化剂。
Through the research of the physical and mechanical properties of the self leveling mortar, The authers developed a super flowing agent.
通过对钛石膏-粉煤灰复合路基回填材料的物理力学性能、胀缩性及路用工程性能的试验研究，探索了钛石膏-粉煤灰回填材料的工程性质和性能。
This paper studied the mechanical properties, expansion and contraction and road performance of backfill material made by waste gypsum from TiO 2 production and fly ash.
采用红外光谱、差热分析、物理力学试验等设备对乘用车助力转向油泵储液罐所选用原材料的结构、耐热性能和物理力学性能进行了表征及测试。
The test results showed that the base of the raw material of the booster steering oil pump stock tank of Fukang car of Shenlong Co.
首先确定了保温墙模的材料组成、尺寸规格及构造，对其物理力学性能进行试验研究。
The heat preservation performance of the compounding shear wall structure was compared with other structures through numerical simulation.
采用粉末冶金复压复烧技术制备出高密度的铜碳复合材料，对两种成分铜碳复合材料的显微组织、物理力学性能和耐磨性能进行了对比试验。
The technology of repressing and re-sintering in powder metallurgy had been used to fabricate a c Cu-C composite materials attaining above 95% of the theoretical density.
采用粉末冶金复压复烧技术制备出高密度的铜碳复合材料，对两种成分铜碳复合材料的显微组织、物理力学性能和耐磨性能进行了对比试验。
The technology of repressing and re-sintering in powder metallurgy had been used to fabricate a c Cu-C composite materials attaining above 95% of the theoretical density.
应用推荐