让我们看一看燃气发动机。
让我们看一看燃气发动机。
让我们看看燃气发动机吧，这是一台新的。
让我们看看燃气发动机吧，这是一台新的。
燃气发动机余热回收对系统总热效率的提高影响很大。
The recovery of residual heat from gas engine has a great effect on the improvement of the total thermal efficiency of the system.
为提高燃气机热泵的火用效率，应选用效率高的燃气发动机。
The gas engine with higher efficiency should be selected to raise the exergy efficiency of gas engine-driven heat pump.
如果汽车需要更多的里程，燃气发动机就投入使用，产生额外的电能来驱动电机。
If the car needs more range, a gas engine kicks in to power a generator that creates additional electricity for the electric motor.
当沃蓝达的电池耗尽时，1.4升四缸燃气发动机就开工带动74马力的发电机。
When the Volt's battery pack is discharged, the 1.4-liter gas-powered four-cylinder engine kicks on to spin the 74-hp generator.
根据燃气发动机的工作特点，探讨了光纤传感器在燃气发动机中的应用方法。
According to the operating characteristics of gas engines, the application of optical fiber sensor to these engines controlling is studied.
燃气热泵是利用燃气驱动燃气发动机，并带动压缩机进行制冷循环的空调装置。
The gas engine driven heat pump (GHP) is driven by the gas engine using gas, and driven the compressors for refrigeration circle.
燃气机热泵是指由燃气驱动燃气发动机，带动制冷压缩机的一种高效节能空调热泵装置。
Gas Engine-driven heat Pump (GEHP) is a high performance and energy saving heating and cooling equipment driven by the gas engine.
在我国能源日益紧张的情况下，研究燃气发动机热电联产机组及其控制系统对于提高能源利用率具有重要意义。
On the situation of energy short, it is important to research gas engine cogeneration unit and its control system.
本文主要介绍WT 61 5 . 0 0lpg燃气发动机主要技术参数，专用系统的工作原理，结构特点。
This paper introduces the main technical parameters, the structure features and the working principle of special systems of model WT615.00LPG gas engine.
当这一车型的16千瓦时的电池组用尽时，它会自动切换到燃气发动机——这一转换过程非常平滑(在行驶中几乎无法察觉)。
When the car's 16-kilowatt-hour battery pack becomes depleted, the car automatically switches to a gas engine-a transition that is remarkably smooth (it's nearly impossible to discern on the road).
德控DELCON工业火花塞分为两种，一种为大型的透平涡轮发动机配套，一种为中小型6至20缸活塞式燃气发动机配套。
There are 2 types of heavy Duty spark plugs. DELCON plugs serve for Turbine Generators with high power output, also serve for engines with 6 to 20 cylinders.
此外，由于引擎（发动机）外部运动较慢的空气覆盖了高温燃气排出引擎后部时的噪音，“高旁道比”（高涵道比）飞机的噪音指数下降了80%左右。
They are also some 80% quieter because the mass of slower-moving air shrouds the noisy hot gases coming from the rear of the jet.
MaslingIndustries在库塔·曼德拉有11名员工，主要专门负责维修直升机和中型飞机的燃气涡轮发动机。
Masling Industries employs 11 people there, running a specialised component overhaul business mainly dealing with gas turbine engines in helicopters and medium-sized aircraft.
需要指出的是，燃气机热泵的速度调节是有限制的，并不能任意调节，这与发动机和压缩机的工作特性有关。
It should be noted that the rate of gas engine heat pump is limited regulation, and can not be any regulation, which is the work of the engine and compressor characteristics.
不同室外温度下的燃气机热泵热负荷、供热量、发动机的余热量、系统一次能耗的变化关系。
Different outdoor temperature of the gas engine heat pump under the heat load for the heat, heat the remainder of the engine, the system changes in a power relationship.
在发动机负荷变化即进气管压力变化时，阀芯的位移更大，燃气输出量的响应更快。
Load change in the engine intake manifold pressure changes that is when the spool displacement greater, gas output in response to faster.
针对微型燃气涡轮发动机喷嘴的雾化对燃烧室火焰稳定性、温度分布和燃烧效率的影响。
The nozzle spray characteristics of micro-turbine engines affect the stabilization of flame of the combustion chamber, the distribution of temperature, and the efficiency of combustion.
为验证原本只为在地面起动发动机而设计的某型燃气涡轮起动机的空中辅助起动性能，在飞行试验台上，对其进行了空中辅助起动试验。
In order to validate auxiliary airstart performance of a gas turbine starter designed only for the ground engine, the test of auxiliary airstart was conducted on the flight test rig.
压力和温度畸变对发动机稳定性影响的评定是当代航空燃气涡轮发动机适用性战术指标的重要内容之一。
The influence of the pressure and temperature distortion to the engine stability is one of important target to evaluate aircraft engine.
涡轮导向器喉道面积值是燃气涡轮发动机设计和生产中的重要参数，必须加以严格的控制。
The throat area of turbine nozzle which is very important in gas turbine engine's design and manufacture must be controlled strictly.
由于弹跳机器人较传统移动机器人具有较强的未知地形适应性，研制了一种燃气驱动的单动发动机式弹跳机构。
Because of the stronger adaptability to unknown terrain of a hopping robot than a traditional mobile robot, a hopping mechanism using a fuel gas-actuated single-acting engine is developed.
喷管中的气流由主流燃气和次流空气组成，用以模拟涡扇发动机的喷管。
The nozzle flow is composed of the main gas stream and the secondary air stream in order to simulate the nozzle of turbofan engine.
分析了航空燃气涡轮发动机主轴承产生滑蹭损伤的机理与危害。
The mechanism and impact of aero-engine bearing's skidding damage are analyzed.
简单介绍了某燃气涡轮轴发动机起动电机数学模型。
A starter mathematic model on a turboshaft engine is described briefly in the paper.
一种适用于燃气涡轮发动机的部件。
一种适用于燃气涡轮发动机的部件。
应用推荐