采用自制净化剂和循环过热相结合的办法，研究了不同净化剂对DZ125高温合金的净化效果，探讨了复合熔盐的净化机理。
The undercooled DZ125 superalloy was investigated by the method of glass and molten salt purification combined with cycled superheating, the mechanism of purification by compound salt was discussed.
采用熔盐净化剂与循环过热相结合的方法，对DZ125高温合金晶粒细化机制进行了系统研究。
The grain refinement mechanisms of undercooled DZ125 superalloy melt were systematically investigated by the method of molten salt purification combined with cycled superheating.
通过改善聚丙烯熔体的流变性能、调整拉伸和变形工艺、控制卷绕张力和油剂加入量，可有效地提高丙纶bcf的卷曲性能。
By improving PP melt rheological properties, adjusting draw-texturing process, controlling winding tension and oil content, the crimping property of PP - BCF yarn can be improved effectively.
为防止着色剂挥发，研究了快速的低温玻璃熔制技术。
To prevent from colorant volatiling, quickly low temperature melting technique must be adopted.
因此，被广泛应用于压敏胶粘剂、热熔性胶粘剂、交通路标漆、橡胶增粘剂、涂料、印刷油墨、纸张的疏水剂等。
So it is widely applied to pressure-sensitive adhesive, hot-melt adhesive, traffic paint, viscosity increaser for rubber, printing ink, hydrophobic agent for paper etc.
产品有：热熔标线涂料、常温标线涂料、双组份涂料、震荡标线涂料、道路划线设备、玻璃微珠，下涂剂等各种道路标线涂料。
Products include: hot melt marking paint, normal temperature reticule coating, a two-component coatings, concussion marking paint, glass beads, coating agent under various road marking paint.
结果表明，PP的阻燃性能不仅受所用阻燃剂的影响外，还与体系的熔体流动性能具有很大关系。
The results showed the fire retardance of PP was affected not only by flame retarding agent used, but also by melt flow ability of the PP system.
并对球型熔铁催化剂的催化性能进行了考察。
The catalytic property of tne ball-type melted iron catalyst is also surveyed.
目的观测甲氨蝶呤植入剂的高温融熔生产工艺对药物结构的影响。
Objective To examine and analyse the structural change of drugs in the implants produced by high-temperature fusible technics.
作者通过实践探讨了蓝灰色吸热玻璃着色剂的选择及熔制工艺条件。
In this paper, selection of colorant and technological condition of melting for the blue grey heat absorbing glass are practically approached.
研制了一种以SIS为基体物质的汽车热熔灯具胶，探讨了增粘树脂、蜡类、偶联剂等对热熔胶性能的影响。
A new hot melt automobile lamps adhesive mainly made of SIS was prepared. The influence of various factors, such as tackiness resin, wax and coupling agent were discussed.
采用优质电熔高钙低硅镁砂，添加复合外加剂，用复合有机结合剂结合，制成了镁质大砖。
The magnesia based big brick was produced by using quality fused magnesite with high calcia and low silica, composite additives and composite organic binder.
对于改性剂r含量不同的低熔点聚酯，在后加工时应充分考虑到温度对熔体粘度的影响。
For these low melting point polyesters with different content of modifier r, the influence of temperature on viscosity of melt must be paid attention during post processing.
采取适当的试验方法研究A-TIG焊活性剂对电弧现象及活性剂涂敷量对焊接熔深增加的作用。
And the effect of SPreading fusion of active flux on weld pool depth and arc phenomenon in A-TIG welding is also studied with properly experimental method.
熔体流动速率(MFR)的测定表明当复合阻燃剂的添加量为40份时，仍能满足加工工艺的要求。
The result of MFR showed that the compounded fire-retardant with 40 PHR could meet the needs of processing craftwork.
系统研究了玻璃成分、工艺和盐浴中添加剂对玻璃的熔制和强度的影响。
The influence of glass composition, manufacturing technology and additives for salt bath on glass melting behavior and mechanical strength has been systematically studied.
确定了万吨级生产装置适宜的设计及操作参数，并对反应器上段催化剂稀释与不稀释，以及双段熔盐循环的方案进行了比较。
Options for diluting catalyst in the upper section of the reactor with or without inerts or using dual-salt recycling system are carried out.
利用自制的活性剂，考察了焊接工艺参数对奥氏体不锈钢A-TIG焊焊缝熔深的影响。
Effects of welding parameters on the penetration of austenitic stainless steel A-TIG weld seam with the home-made active flux were carried out.
粤桥牌大理石粉为白色或浅灰色矿粉，主要用于药皮焊条等焊接材料的造渣造气剂，可提高熔渣堿度稳。
" bridge brand " marble mostly to use in slagging powder with drug cover welding electrode. improve slag basicity, steady arc, increase surface strain. it also used on architecture industry.
开发研究了一种用于钛合金熔模精铸型壳面层的新型LJ8型粘结剂；叙述了用该粘结剂制备型壳的工艺过程。
LJ8 new binder for primary slurry in titanium investment casting has been developed and the ceramic shell process using the binder was described.
向AF305活性剂中添加铝粉改变焊渣分布，研究焊渣分布与熔深的关系，证实了焊渣成片分布能增加焊接熔深。
Relation between slag contribution and weld penetration is studied by adding aluminum powder into AF305 to change this distribution.
磷酸盐在低熔封接玻璃中既作为主要原料也是成核剂及填料。
The phosphate is used not only as the main material of low-melting sealing glass, and also as the nucleating agent and the filler.
以共混物平衡扭矩为参数考察了界面改性剂对共混物熔体扭矩的影响；
The effects of interfacial modification on torque of blend melt and crystallization behavior of PP were investigated.
通过焊接偏移试验、直流正接A-TIG焊试验和FBTIG 焊试验研究了活性剂增加熔深的机理。
Some experiments, including weld deviation experiment, A-TIG welding experiment with DCSP mode and FBTIG welding experiment, are made to study the mechanism of activating flux improving penetration.
本文在总结国内外铝合金添加剂的基础上，提出了一种新型高效速熔铝合金添加剂的研制方法。
On the basis of the domestic and foreigh aluminum alloy additive, this article research a new aluminum alloy additive, which have the advantage of fast dissolving, high efficiency and wide appli.
微生物多糖PS—1231在高级精细瓷全熔块釉浆中作悬浮剂，改善了釉浆的悬浮稳定性、粉层强度和流变性能。
Microbe polysaccharide PS-1231 was applied as suspending agent in high-fine porcelain pure fusion cake glaze slurry.
讨论了白云石、石灰石、碳酸钡组成的碳酸盐发泡剂对LF熔渣发泡的影响。
In this paper the effect of the carbonate foaming agents which are composed of dolomite, limestone and barium carbonate on the foaming of molten LF slag is discussed.
炉内未燃煤粉存在降低了焦炭的熔损。作为还原剂可取代部分焦炭。
The unburned pulverized coal in the furnace will reduce coke degradation and can also replace some amount of coke as a kind of reducing agent.
结果表明：新型防老剂抗老化效果较好，可解决热熔压敏胶中SIS的老化问题。
The result of experiment showed that the anti aging effect of the composites was good, and using this antioxidant could solve the aging of SIS in the hot melt pressure sensitive adhesive.
结果表明：新型防老剂抗老化效果较好，可解决热熔压敏胶中SIS的老化问题。
The result of experiment showed that the anti aging effect of the composites was good, and using this antioxidant could solve the aging of SIS in the hot melt pressure sensitive adhesive.
应用推荐