介绍了低温熔融法生产不溶性硫磺新工艺。
The new production process of insoluble sulphur with low-temperature melt way is introduced.
采用熔融法把纳米钠基蒙脱土填充到聚丙烯中。
The nano Na-montmorillonite was filled into PP by melting method.
采用氢氧化钾熔融法以不同无机酸处理合成了铌酸。
Niobium acid was synthesized by potassium hydroxide melting method using different inorganic acid treatment and its properties were characterized by FF-IR, TG and UV-VIS spectra.
研究了用酸浸与钠碱熔融法从钨渣中富集和回收钽铌。
The enrichment and recovery of tantalum and niobium through acid leaching and sodium alkali fusing from tungsten residue is studied.
惰气熔融法结合五元浴能够准确测定烧结氮化硅中氮。
The nitrogen in the block Si3N4 can be determined accurately by inert gas fusion thermal conductivity method combined with 5-element bath.
溶胶凝胶工艺尤其适合制作传统的熔融法不能或不易获得的功能陶瓷纤维。
Solgel process was specially suitable for preparing the functional ceramic fibers which was very difficult or even could not be obtained by the conventional melting method.
本文分别采用熔融法和热压烧结工艺制备了致密的二硅酸锂微晶玻璃及其复合材料。
The lithium disilicate glass-ceramics and their composites with high relative density were prepared by melting method and hot-pressing technology, respectively.
为提高防老剂BHT的纯度，采用重结晶和区域熔融法对工业品防老剂BHT进行提纯。
In order to improve the purity of industrial product, Antioxidant BHT was purified by the methods of recrystalize and zone melting.
并比较了松香催化加氢的熔融法和溶剂法，结果表明溶剂法加氢反应的速度大于熔融法。
Comparisons undertaken between melting method and solvent process showed that the hydrogenation reaction rate of the solvent process is greater than that of the melting method.
采用高温熔融法，在硼酸盐玻璃的配合料中引入抗菌剂磷酸银，一次烧制而成制得抗菌玻璃材料。
By adding silver phosphate as antibacterial into the batch of borosilicate glass, we can get the anti-bacterial glass in high temperature melting furnace.
通过对比试验发现：测定炭素材料中二氧化硅的含量，熔融法的分析结果比氢氟酸法更稳定、准确；
The comparative tests show that the content of silicon dioxide in carbon materials determined by the melting method (MM) is more stable and accurate than the hydrofluoric acid method (MHA);
介绍了熔融法处理分析试样中几种常用的熔剂、熔器及其选用，探讨了硅酸盐类试样处理时的操作技巧。
We introduce several instantly used fluxes, melting-pot and their choosing when molten method is used to process of analytic sample explores operation dexterity as well as process silicate sample.
DS C曲线显示该树脂的固化能与熔融法得到的基体树脂有所不同。该树脂固化后有良好的热稳定性。
The curing property of the resin was found to be a little different from that made by melting copolymerization according to the DSC curve, and the cured resins had good heat stability.
简要叙述了堇青石基微晶玻璃的主要制备方法。并以熔融法为主，对本系统微晶玻璃的性能控制工艺，如组成设计、热处理、退火工艺等进行了综述。
The main several preparations of cordierite-based glass ceramics are reviewed. And the properties control methods, such as component design, the heat treatment and the annealing are presented.
方法：以聚乙烯吡咯烷酮（PVP）、聚乙二醇-6000（PEG-6000）为载体，溶剂法和溶剂熔融法制备固体分散体，并进行体外溶出度研究。
Method: carvedilol solid dispersions were prepared by solvent-melting and coevaporation methods with PEG-6000 and PVP as carriers, the study on the dissolution was conducted in vitro.
由于使用无需任何预处理和造块的矿粉，熔融还原法既可节能、又能减少污染。
The smelting reduction process saves energy and lessens pollution through using of ore fines without any pretreatment and agglomeration.
黄磷渣是热法磷酸生产过程中排放的熔融态工业废渣。
The yellow phosphorus slag is the molten industrial solid waste discharged from the phosphorus thermal process.
由于TLCP和PET在热力学上不相容，单纯用熔融共混法，以TLCP来对PET进行原位复合增强效果不明显。
Because PET and TLCP are not miscible in thermodynamics, the effect that only using TLCP to "In-situ" reinforce PET by melt blending is not clear.
贝塞麦炼钢法：吹入压缩空气通过熔融的钢铁以燃尽多余的碳和杂质的一种炼钢方法。
Bessemer process: a method for making steel by blasting compressed air through molten iron to burn out excess carbon and impurities.
通过这一方法，玻璃的每一面都是熔融表面，只接触空气而避免了与任何器皿的接触。
This way, each side of the sheet is a "melt surface," exposed only to the air and not touched by any part of the equipment.
用熔融缩聚法含成的聚酯型光刻胶有较宽的分子量分布。
The polyester type photoresists made by melt polycondensation have wide molecular weight distribution.
同时还用DSC法分析了所合成PBT的熔融行为。
挤出共混法通过熔融混炼聚合物和纳米微粒可加工成稳定的纳米复合材料。
Extrusion blending method can process a stable nanometer compounding material through melt-mixing polymer and nanometer particle.
熔融造粒法具有简化工艺流程、降低能耗和生产成本的特点，生产的硝基复合肥产品合格率高。
Nitro-compound fertilizer produced by melt prilling method, which had the characteristics of simple process, low energy consumption and low production cost, had high quality.
结合热力学和动力学的分析，概括了熔融插层法一些理论上的研究进展。
Based on thermodynamics and kinetics analyse, some research achievements in theory a-bout melting intercalation are summarized.
高压法三聚氰胺装置熔融尿素升压泵运行过程发生多起断轴事故，使装置多次出现非计划停工。
The packing axle seal of the melt urea pump leaked seriously, leading to many harmful effects, so we revamped the form of axle seal.
为采用高速熔融纺丝法应用纳米抗菌PET复合材料提供了实验数据与理论依据。
The results provide a basis for the application of high speed melt spinning to nano-antibacterial PET composites.
利用熔融插层法将有机蒙脱土引入环氧树脂体系，制备出含有纳米分散蒙脱土的无溶剂环氧涂料。
The title coatings has been prepared by use of melting intercalation technology to introduce the OMMT into epoxy resin system.
利用熔融插层法将有机蒙脱土引入环氧树脂体系，制备出含有纳米分散蒙脱土的无溶剂环氧涂料。
The title coatings has been prepared by use of melting intercalation technology to introduce the OMMT into epoxy resin system.
应用推荐