研究了玻璃熔窑大碹的受力状况。
从而可以更好地控制全电熔窑中的热点。
Therefore the hot spot in the all electric melting furnace could be well controlled.
浮法玻璃熔窑的帮砖。
熔窑结构的变化必然会引起玻璃液流结构的变化。
The change in structure of glass tank can lead to change in glass flow pattern.
从熔窑结构特征上探讨了马蹄焰熔窑的优势和劣势。
The superiorities and inferiorities of the end-port furnace on its structural characteristics were discussed.
采用数学模拟的方法,建立熔窑池壁砖内部的温度场模型。
Using a mathematical analogue meth - od, an internal temperature field model of the pool wall bricks is set up.
本文针对玻璃熔窑这种复杂的工业对象提出一种智能温度控制系统。
An aptitude temperature control system of such complicated industry plant as glass furnace was presented.
本吊墙用于玻璃熔窑前脸墙,取代传统的碹结构前脸墙,有以下优点。
It is used in glass furnace front wall, replacing the traditional arch structure front wall. The advantages are as follows.
其中一个有效的方法就是在当前熔窑上安装电助熔或建新窑时带电助熔。
One of the perspective ways is to install the electric boosting into the existing furnace or to build the new furnace including the electric boosting.
介绍了国外采用数值模拟研究电助熔对马蹄焰熔窑火焰空间热交换的作用。
The numerical simulation study abroad on effects of electric boosting on heat exchange in flame space of end port furnace was reviewed.
本文介绍用于玻璃熔窑保温层设计、保温层节能效果计算及熔窑热平衡计算的软件。
A specialized software is introduced which is useful for design and calculating the energy saving efficiency of insulation layers and for calculating energy balance of glass melting furnaces.
论述了玻璃全电熔窑烤窑步骤及烤窑过程中每个步骤应做的主要工作和应注意的问题。
The steps in baking process in all electric glass melting furnace and the main work in every step as well as the attentions during baking were described.
针对浮法玻璃熔窑运行后期熔化部压力波动形成的原因及对策,做了较为详尽的论述。
This paper discussed the causes of pressure fluctuation of melting region in later stage of float glass furnace in detail and the countermeasures to this fluctuation was also introduced.
工艺参数的控制方法必须针对浮法玻璃熔窑运行后期的特点,才能保证工艺制度的稳定。
The technological parameters control must aim at the running characteristics of float glass furnace in its later stage so as to insure the stability of technological regulations.
利用三维计算机模拟技术,研究了窑坎在超薄浮法玻璃生产中对稳定熔窑内玻璃液流的作用。
The function of the weir in the furnace of the thin float glass was studied by using three- mathematics simulation.
某工程大型玻璃熔窑在一次漏玻璃液火灾中,钢管混凝土窑底柱表现出不寻常的抗火灾能力。
The concrete filled steel tubular columns for supperting furnace showed a outstanding fire-resistant capability in a fire case caused by the leakage of molten glass from one large glass furnace.
本文介绍了玻璃熔窑微机控制系统的工作原理、调节功能、检测参数、检测方式及控制精度。
This paper is concerned with the working principle, regulating behaviour, testing parameters, estimation model and controlling accuracy of microprocessor control system of glass melters.
熔窑挂钩砖头部掉落后,冒出的火焰直接烧托铁板,严重影响熔窑的安全运行,同时使重油消耗增加。
The skewback bearer will be directly heated by gushing flame when tuckstone end dropped happens, which threats the safe run of the furnace and causes heavy oil consumption up.
阐述了玻璃熔窑全氧燃烧技术的机理,全氧燃烧应用的优点以及应用过程中存在的一些问题和解决方法。
This paper introduces the mechanism, advantages of oxy-fuel combustion in glass melting furnace and there are some problems and solutions in the application process.
本文讨论玻璃熔窑成型区温度控制方法,提出了计算机直接数字控制系统,给出了该系统的硬件和软件。
This paper discusses the method of Glass Furnace Forehearth Zone Temperatures and presents a direct digital computer system and hardware software.
简述了富氧燃烧节能技术的原理,论述了富氧燃烧在浮法玻璃熔窑应用过程中的关键问题及相关解决方法。
The principle of rich oxygen combustion energy-conservation technology was described, some key issues and corresponding solutions of the technology were also discussed in this article.
流槽是连接熔窑和锡槽的一个关键部位,主要包括流槽砖和唇砖,其中唇砖的好坏直接影响玻璃的产、质量。
Stout is a key place which joins furnace with tin slot. It mainly includes stout brick and lip brick. The lip brick's quality directly influences the glass 'yield and quality.
该系统投入生产运行后,性能稳定,熔窑各项热工参数得到稳定控制,保证了玻璃熔制质量,并明显地降低了能源消耗。
It is running stably in practical use. All thermotechnical parameters of the melting furnace can be well controlled to guarantee glass melting quality and reduce remarkably energy consumption.
对浮法玻璃熔窑节能技术进行了探讨,特别就熔窑运行过程中实际操作方面的一些节能技术进行了分析总结,并提出了自己的见解。
The energy saving technology of float glass furnace was discussed and the operation skills for saving energy during the running period of furnace were also summarized.
设计一个运行性能优良、可控性好的熔窑是玻璃熔窑设计师追求的重要目标,单凭经验进行设计难以达到这一目标,而借助于模拟技术则有可能实现。
The method of designing new furnaces based only on experience can hardly satisfy such purpose, but the simulation technique may help to reach this goal.
熟料大块的形成起源于窑尾物料中存在大量碱的硫酸盐和氯化物的低共熔液相及其不均匀分布。
The clinker masses are formed due to the presence and non-uniform distributions of large amount of lower melting alkali sulphates and chlorides in the kiln charge.
以相似理论为依据,建立了方形池窑电熔模拟模型。
According to analogy theory, an electric melting model was established as a simulation of rectangular furnace.
以相似理论为依据,建立了方形池窑电熔模拟模型。
According to analogy theory, an electric melting model was established as a simulation of rectangular furnace.
应用推荐