通过采取相应的措施可使熔炼过程顺利进行。
The oxygen autogenous smelting process can be successfully conducted by adoption some suggested measures.
主要论述了锰黄铜熔炼工艺设计及熔炼过程。
This paper briefly expounds the technological design and smelting process of ZCuZn40Mn3Fel.
顶吹气体的流量控制是熔炼过程中的重要问题。
The control for top blowing is an important problem of the smelting process.
将微机应用于其熔炼过程控制具有非常重要意义。
Computer control is of great importance in the melting process.
钢是铁与碳的合金，焦煤便是熔炼过程中碳的来源。
Steel is an alloy of iron and carbon. Coking coal is a source of carbon in the smelting process.
密闭鼓风炉的熔炼过程极其复杂，工艺结构庞大。
Imperial smelting Furnace (ISF) smelting process is a quite complex process.
该系统的应用使得熔炼过程的自动化程度大大提高。
The application of the system can greatly improve the automatic level of smelting process.
介绍了在闪速熔炼过程中，铜在电炉渣中的损失状况。
The loss of copper in electric furnace slag during flash smelting operation is described.
对金川二次铜精矿氧气自热熔炼过程进行热力学分析。
The oxygen autogenous smelting process of nickeliferous copper concentrate from Jinchuan Nonferrous Corp.
烧结块软化点是影响密闭鼓风炉熔炼过程的一个关键因素。
The softening point of sinter is a key factor that affects the smelting process of Imperial smelting Furnace (ISF).
该方法熔炼过程持续稳定，可降低成本，提高铝的回收率。
This smelting process is continual and stable, the production cost is reduced and Al recovery is increased.
在熔炼过程中，矿石将要被加热到几乎摄氏两千度（华氏三千六百度）。
The ore will be heated toalmost 2, 000 degrees Celsius (3, 600 degrees Fahrenheit) during smelting.
本文介绍了采用STD工业控制机的冲天炉熔炼过程控制系统。
This paper introduces the control system based on the STD-BUS industrial control computer for cupola melting process.
概括了氮在钢液中的溶解度公式和高氮钢熔炼过程中的关键问题；
The formulae of nitrogen solubility in different nitrogen bearing steels are summarized and the key points in high nitrogen steels manufacturing process were pointed out.
基于吉布斯最小自由能原理，建立了铜闪速熔炼过程的多相平衡数学模型。
Multiphase equilibrium mathematical model for the copper flash smelting process is established based on the Gibbs principle of minimum free energy.
基于吉布斯最小自由能原理，建立了铜闪速熔炼过程的多相平衡数学模型。
Procedures for the multiphase equilibrium calculation are generally based on Gibbs free energy minimization or equation-solving methods.
利用直接差分法，建立了水冷铜坩埚感应熔炼过程温度场数值模拟计算模型。
A numerical model for simulating the temperature field of titanium melted in induction furnace with a water cooled copper crucible has been developed by using the direct finite difference method.
因此，钛的熔炼需要发生在真空中或者惰性气氛之中，也正因为此，熔炼过程很昂贵。
So it has to be refined, forged, welded, and cast in a vacuum or under inert gas, an expensive process.
分析了奥斯麦特炉熔炼过程中电炉渣含铜高的原因，提出相应对策来降低渣中含铜量。
The reason of high copper content in electric furnance slag during smelting in Ausmelt furnace is analysed, the corresponding countermeasures for reducing copper content are put forward.
由工业控制计算机实现的浸没熔炼过程控制系统能有效地控制炉内的氧化还原性气氛。
The control system for the sirosmelt furnace process which implemented by industrial control computer can control the atmosphere of oxidizing-reducing process in the furnace effectively.
本文介绍冷坩埚熔炼技术的特点，冷坩埚的结构、工作原理以及熔炼过程的一维解析解。
The characteristics of the smelting technology, the structure of the cooling crucible, operation principle and one dimensional analysis of smelting process are introduced here. The techno…
本文介绍冷坩埚熔炼技术的特点，冷坩埚的结构、工作原理以及熔炼过程的一维解析解。
The characteristics of the smelting technology, the structure of the cooling crucible, operation principle and one dimensional analysis of smelting process are introduced here. The technology I...
以TEGOSTAR738锡基巴氏合金为例，阐述了对其熔炼过程及室温力学性能要求；
The paper described the melting process, the mechanical properties of TEGOSTAR738 alloy and the centrifugal casting process.
实际应用表明，当熔炼过程出现各种特殊情况时，采用这些局部策略能得到更好的控制效果。
Practice application shows that better control effect can be obtained by use of those partial strategies when special event happens during melting.
随着铜闪速熔炼过程指标要求的提高，对铜闪速熔炼过程进行数值分析与优化就显得日趋重要。
With the development of flash smelting, it shows more and more importance of the numerical analysis and optimization of flash furnace.
在分析熔炼过程中存在问题的基础上，本文提出了基于锌产量预测模型的密闭鼓风炉优化方法。
Some problems based on principle of ISF smelting process are analyzed and an operational optimization approach of ISF status based on Zn-output forecasting model is presented.
本文介绍了熔剂在铝合金熔炼过程中的作用，熔剂的分类和要求，常用熔剂的组成，适用范围及使用方法等。
This paper has studied flux of aluminum alloy. It has described some questions with flux such as functions, sorts, composition, usage and so on.
使用计算机可以快速、准确地计算铸造熔炼过程中的炉料配比，但计算速度和精度与程序所用的计算方法有关。
Being able to process at high speed, computer makes it possible to calculate the proportion of charges in a melting process quickly and precisely.
采用该工艺后，可减少一次铝硅合金的熔炼过程，在降低烧损、节省能源的同时，降低了铝硅合金熔炼的总体成本。
Using this technology, the smelting process of Al-Si alloy may be simplified. The technology reduces the overall cost which the Al-Si alloy is smelted while reducing loses and saving energy.
采用该工艺后，可减少一次铝硅合金的熔炼过程，在降低烧损、节省能源的同时，降低了铝硅合金熔炼的总体成本。
Using this technology, the smelting process of Al-Si alloy may be simplified. The technology reduces the overall cost which the Al-Si alloy is smelted while reducing loses and saving energy.
应用推荐