据此，设计出以控制策略为核心的立窑水泥煅烧过程自组织控制器。
And a self organizing controller with this control strategy as core is designed for cement calcination in shaft kiln.
文献中提出“等质量等能量”的控制模型以实现对立德粉煅烧过程的控制。
The model of "Equal Energy for Equal Mass" has been proposed to solve this problem in the literature.
由于白云石在煅烧过程中碳酸盐分解后形成多孔疏松结构，使其难以烧结致密。
Densely sintering of dolomite ore is difficult because decomposing of carbonate results in forming porous structure during calcining process.
使用透射电镜和X射线衍射对先驱沉淀物的形貌及煅烧过程的相转变进行了研究。
The precipitate precursor and phase transformation was characterized by TEM and X-ray diffraction.
低温液相合成晶态纳米二氧化钛由于避免了高温煅烧过程，可望赋予其更优越的特性。
The liquid synthesis of nanocrystals titania at low temperature, due to avoiding the sintering process, brings superior physical and chemical properties.
将其用于立窑水泥煅烧过程控制，运行结果表明这种算法是可行而有效的，具有很好的鲁棒性。
The algorithm has been used in the process control of cement calcination in vertical kiln. It turned out that the algorithm was possible, effective and possessed very well robustness.
目前镁制品行业在菱镁矿的开采、煅烧过程中，大量的小颗粒矿石被废弃，这是一个很大的浪费。
At present, a great waste existed in magnesium-related filed due to the abandonment of tremendous finely gruond minerals during the exploitation and calcination of magnesite.
它对机械化立窑水泥煅烧过程操作工的经验知识和专家知识进行综合考虑，归纳为知识系统决策表。
A decision table of knowledge system is concluded by comprehensively considering knowledge, from experience and experts, on the operation of cement calcination in a mechanized shaft kiln.
由TG - DTA和IR光谱分析表明，合成的沉淀为碱式碳酸盐，煅烧过程中失重为28.06%。
TG-DTA and IR spectra indicated that the precursor was alkaline and the weight loss during calcination was 28.06%.
实验结果表明，高的反应温度和煅烧过程中快的升温速度明显增加了前驱体溶液中单斜氧化锆的形核数。
Experimental results indicate that a high reaction temperature and quickly ascending temperature speed apparently increase the nucleation number of monoclinic zirconia in the precursor solution.
改造采用燃煤间接加热回转窑煅烧工艺，同时为了有效防止热水解反应的发生，将干燥与煅烧过程分开进行。
The rotary kiln are indirectly heated by flue gas. In preventing the occurrence of hot hydrolytic decomposition, drying and burning are carried out respectively.
对液相沉淀法合成纳米粉体的沉淀反应过程、洗涤过程、干燥过程以及煅烧过程等环节的控制方法及原理作了详述。
The control method and mechanism of the liquid precipitation method including reaction, washing, drying and calcining are introduced in details.
采用高分子网络凝胶法制备纳米yag - Y 2o 3复合粉体，对网络凝胶机理和胶体的煅烧过程进行了研究。
Nano - sized YAG - Y2O3 powders were prepared by polyacrylamide gel method. The polyacrylamide gel mechanism and calcination procedure were analysised.
通过XRD、TG -DTA、SEM及材料的物理力学性能等试验，较系统地研究了高掺量粉煤灰烧结砖煅烧过程。
The firing process for fly ash sintered brick with high additives has been systematically studied through tests of XRD, TG-DTA, SEM and physical mechanical properties for material.
在实验室电炉静置煅烧条件下，研究了硫酸钙和亚硫酸钙、含亚硫酸钙的脱硫灰和石膏在水泥熟料煅烧过程中硫的逸放。
The sulfur emissibility during burning cement clinker with calcium sulfate, calcium sulfite gypsum and desulphurize slag that consist of CaSO3 separately were studied in laboratory electric stove.
针对锌钡白干燥煅烧过程建模难的问题，提出了一种基于TS模型的自适应神经模糊推理系统(ANFIS)建模方法。
In order to solve the difficult modeling problem of the lithopone calcination process, this paper proposes an adaptive neural fuzzy inference systems (ANFIS) modeling method based on t s model.
并用FT-IR、XRD、DTA/TG和TEM等手段研究了二氧化硅超微细粉在煅烧过程中的物相和显微结构的变化。
Phase and microstructure changes of silica ultrafine particles in sintering were studied with FT-IR, XRD, DTA/TG and TEM et al.
以湖北松宜煤系高岭土为原料，研究了煤系高岭土煅烧过程中煅烧温度、保温时间、升温速度、添加剂等因素对煅烧产品白度的影响。
Some experimental research was conducted on the effect of the calcining temperature, remaining time, temperature system of calcinations and additives on the whiteness of calcined kaolin.
从扩散动力学的角度出发，对自释釉在干燥过程和煅烧过程中物质迁移的基本机理进行了初步探讨，并指出了影响扩散过程的主要因素。
Depend on transference dynamics, discussed the mechanism of self-releasing glaze in drying and firing. After the effect of transference was analyzed.
研究了煅烧过程中白度的变化规律，成功地找到了提高该地区煅烧高岭土白度较有效的添加剂。为进一步扩大实验和开发利用该区高岭土资源提供了依据。
Its whiteness change law in the roasting process was studied and different additive for improving the roasted kaolin whiteness of this mine district were successfully found.
结果表明，浸渍、干燥、煅烧和硫化均是影响催化剂机械强度及其可靠性的重要过程。
Results reveal that the impregnating, drying, calcination and sulfidation are all important processes for the mechanical strength and reliability of the catalyst.
中国石油锦州石化公司煅烧装置回转炉下料管，在运转过程中水套与内管连接处发生了开裂和烧损。
The rotary hearth calciner in calcinations device of Jinzhou Petrochemical Incorporation was cracked and burnt out at the joint be - tween water jacket and inner tube during its operation.
考察了影响铁泥酸溶、煅烧等过程的各种因素。
The factors which influenced the acid-soluble process of iron mud and calcination were thoroughly investigated.
钛柱撑膨润土的制备过程中，煅烧温度至关重要。
During the synthesis process of titanium oxide pillared bentonite, the calcinations temperature is the most important.
硅灰石微粉碎过程中，为保护硅灰石的短纤维针状结构，可在粉碎前对硅灰石进行煅烧空冷处理。
In the process of wollastonite fining, we can forge and then cool it to protect its crystal structure which is short acicular fiber.
用TG - DTA法确定前驱体热分解过程及煅烧温度。
The thermal decompose progress and calcined temperature of precursor was determined by TG-DTA.
根据理论和实践总结分析了立窑煅烧水泥熟料工艺过程中存在的问题。
Based on theory and practice, a number of problems in the process of calcining clinker in vertical cement kiln was analysed.
煅烧是无机盐生产过程中的重要工序，其设备选择优劣直接影响最终产品质量、能耗大小及成本高低。
Calcination is an important working procedure in the production of inorganic chemicals. The selection of equipment will directly affect the quality of products, consumption of energy and the cost.
同时将天然石墨鳞片进行煅烧处理，有效去除生产过程中附着于其表面的各种油性物质及基团。
Meanwhile, the natural scale graphite was calcined to efficiently remove the oily substances and groups on its surface.
研究了以硫铁矿烧渣为原料制备铁红的工艺过程及原理，详细探讨了合成反应的各种影响因素及煅烧工艺条件。
The principle and the process of preparing iron oxide red from pyrite cinder were studied. The factors affecting the synthesis reaction and the process conditions of calcination were examined.
应用推荐