步骤之一,焊接过程是检查叶片温度。
Step one of the welding process is checking the blade temperature.
焊接过程稳定,焊接飞溅小。
动态特性优良,引弧容易,焊接过程飞溅小。
对焊接过程检测系统的一些相关问题进行了研究。
It studied some problems about the welding process monitoring system.
焊接过程检测与控制是提高焊接质量的重要手段。
It is important to improve the welding quality by test and control during welding.
焊接过程控制计划是否是最新的并反映当前的制程?
Are soldering process control plans up to date and reflecting current processing?
用于焊接过程参数的数据采集、分析处理及图形显示。
It is used for data collection of the welding process parameters, analytical process and pattern display.
本文详细叙述了巨型压力钢管的预热装配和焊接过程。
The processes of preheating and welding of super scale penstocks were detailed.
焊接电流波形对焊接过程稳定性和焊缝质量起着决定性的作用。
The stability of welding process and the quality of welding seam are decisively affected by the welding current wave.
低成本的焊道,与其他焊接过程相比,填充金属的数量相对比较少。
The quantity of filler metal being often much lower than with other welding processes.
铝合金MIG焊接过程动态检测与控制是提高焊接质量的重要手段。
It is an important method which improve the welding quality by tested and controlled aluminum alloy MIG welding process dynamically.
对焊接过程的电流及电压波形进行采集,分析焊接过程的电弧行为。
Through the acquisition of welding currents and voltages during welding, the arc behavior of welding process was analyzed.
实验结果表明,本文所研制的焊机焊接过程稳定,飞溅小,操作方便。
The experiments showed that the welder was with stable welding process and small spatter and easy to use.
焊接过程对被焊工件来说,是局部的不均匀加热过程和不均匀冷却过程。
The welding process of the welding workpieces, uneven heating process is partial and uneven cooling process.
焊接过程瞬态组织预示程序是在先前的焊接热传导程序基础设计而成的。
In this research, a transient microstructure-prediction program was designed on the basis of coupling a previous heat transfer program.
对高能量密度激光匙孔焊接过程的二维准稳态传热进行了计算方法的研究。
A numerical method is presented for the two dimensional quasi steady state heat transfer on high power density laser welding processes according to the keyhole model.
焊接过程熔池动态特征信息获取与智能控制一直是焊接界研究的前沿课题。
Obtaining the dynamic characteristic information of molten pool and intelligent controlling in the welding process are focus of research in welding field.
将视觉传感技术与自适应控制技术相结合用于铝合金tig焊接过程质量控制。
In this paper, the vision technology with adaptive control technology are used in TIG welding quality control of the aluminium alloy.
在数字信号处理及无损检测的理论基础上,分析了焊接过程对电流信号频谱的影响。
On the basis of digital signal process and nondestructive testing, the effect of welding process on the frequency spectrum of the current signal in AC spot welding is analyzed.
电弧焊接过程是一个多因素交互作用的复杂过程,焊接过程的状态与许多参数有关。
Arc welding process is a very complicated process with many interacting factors mixed together, so the transient state of welding process is related to many parameters.
焊接过程电弧稳定,焊接接头熔合良好,未见裂纹、 未焊透、夹渣、气孔等缺陷。
This process showed a stable arc, good welding joints without any gas pores and cracks.
因为焊接过程的复杂性,所以很难通过实验的方法对焊接过程产热和应力分布进行研究。
Because of the complexity of welding process, the research of weld process produce hot and stress through method of experiment is very difficulty.
同时研究了芯片与微带线间距的互连、微带线制作、材料的可焊性及焊接过程等制造技术。
And other manufacturing technologies-interconnect between the chip and microstrip, manufacture of microstrip, solderability of available materials and soldering process are discussed.
采集的数据能正确反映焊接实际过程,焊接参数经还原后可实现焊接过程参数的可追溯性。
The acquired data can reflect the factual welding process rightly, furthermore, the welding process can be well repeated by using the welding parameters.
一般来说,焊接过程的稳定性就是要求在焊接设备参数扰动的情况下,保证焊接质量的稳定。
Generally speaking, the stability of welding process requires the stability of welding quality under the circumstances of parameter disturbance by welding equipments.
因此,快速、准确地同步测试这些动态焊接参数,对在线监控焊接过程及焊接质量有重要意义。
Therefore, it has a great significance in On-line supervision of welding process and welding quality to measure these dynamic welding parameters rapidly and accurately.
因此,模糊规则集的自动生成及隶属度函数的在线调整对于现代焊接过程控制来说是迫切需要的。
Therefore, the automatic determination of the fuzzy rule and in-process adaptation of membership function are required for the advanced welding process control.
通过对螺旋埋弧焊管内焊缝成型和焊接过程的分析,指出焊缝裂纹易产生在焊接熔池脆性温度区。
Through analysis on inside weld forming and welding procedure of SSAW pipe, it pointed out weld crack is easy to appear in brittle temperature zone in welding pool.
通过对螺旋埋弧焊管内焊缝成型和焊接过程的分析,指出焊缝裂纹易产生在焊接熔池脆性温度区。
Through analysis on inside weld forming and welding procedure of SSAW pipe, it pointed out weld crack is easy to appear in brittle temperature zone in welding pool.
应用推荐