成功地用于大功率闪光对焊成套设备的焊接工艺过程实时控制。
It successfully applies the real time control of welding procedure process on large power flash butt welding complete equipment.
介绍了“三峡永久船闸人字门”焊接工艺过程及所采用的方法。
The welding process and method for the inverted-V gate of the permanent ship lock of Three Gorges project is outlined in this paper.
探讨了焊接工艺过程对气压焊焊接接头显微组织及强度的影响。
The effect of welding process on the microstructure and the strength of welded joint is discussed in the present paper.
在分析了铜铝管焊接工艺过程的基础上，重点论述了铜铝管对焊机执行系统和控制系统的设计。
This paper, based on analyzing the process of Cu-Al pipe butt welding, discussed the design of the executive system and control system for PLC controlled Cu-Al pipe butt welder.
在分析了铜铝管焊接工艺过程的基础上，重点论述了铜铝管对焊机执行系统和控制系统的设计。
The executive mechanism of Cu-Al pipe butt welder, based on above, was designed, including its air system and mating clamper.
设计焊接结构件时，一方面要考虑结构强度和工作条件等性能的要求，另一方面还要考虑到焊接工艺过程的特点。
When designing jointing part, on one hand some requires of structure intensity and working conditions are considered, on the other hand, some characters of welding technics are also considered.
结果表明，Fluent可以很方便的对焊接工艺过程进行模拟，其输出的计算结果可以直观的揭示各种驱动力对于焊接过程的影响。
The results show that welding model can be developed easily by FLUENT and it outcome can describe the influence of different driving force clearly.
介绍一种用于电力机车的焊接工艺制定专家系统的开发过程及功能。
The development process and functions of a "Compiling expert system" for welding technology on electric locomotives are described.
介绍了钛制叶轮的焊接工艺和制造过程，说明了焊接部位的检查方法及检查结果。
The paper introduces the welding procedure and fabrication process of titanium alloy wheel, indicates the inspection method and quality result of welding location.
其中包括焊接工艺评定的试验方法、过程和结果。
It includes the testing method, the process and the result of welding procedure qualification.
从焊接材料的选用，焊前预热、焊接过程和焊后热处理的控制几个方面，着重介绍了ZY6400/12.5/28型液压支架的焊接工艺。
The paper introduces welding technology of type ZY6400/12.5/28 hydraulic support, from several respects of selecting materials preheat before welding, welding process and so on.
压力容器产品制造过程中，产品的焊接工艺是否合理、先进将会直接关系到产品的质量。
In the manufacturing process of the pressure vessel, the product rationality and advance of welding process will be directly related to the quality of the product.
作为非接触测温的红外测温技术，能够真实地反映出焊件在焊接工艺中的温度随时间变化的热循环过程。
The infrared measuring temperature technique as non-contact measuring temperature method can reflect the heat cycle process of the temperature change along with time of the weldment.
研究了焊接过程中焊接电流产生的电磁力对电容储能凸焊喷溅、接头强度及焊接工艺的影响。
The effect of electromagnetic force on the splash, joint strength and welding process of capacitor discharge projection welding is studied.
因此在焊接过程中应该适当改变焊接工艺参数，调整焊接规范。
Therefore, during the welding process the welding parameters should be changed appropriately, and the welding conditions should be adjusted too.
对这样一个试验的鉴定仅对多种焊接工艺试验时所进行的过程顺序有效。
The qualification of such a test is only valid for the process sequence carried out during the multiprocess procedure test.
本文的工作对于等离子弧焊接工艺参数的匹配及其过程的优化有重要的指导意义。
This work may be as a useful tool for the understanding of the parameters matching and process optimization in plasma arc welding.
通过穿孔过程分解研究，揭示出焊接工艺参数在小孔稳定建立过程中的影响规律。
By analysis of the establishing process of the keyhole weld pool, the regularities of the welding parameters are obtained.
以az31变形镁合金为研究对象，分析了其TIG自动焊过程中焊接工艺参数对焊缝成型的影响。
Based on the wrought AZ31B magnesium alloy, the effect of the welding parameter on weld shape was analyzed in the course of the TIG welding.
在焊接过程中，只要严格按照工艺技术措施操作，采取冷焊接工艺进行焊接，可以解决轮带现场焊接的技术难点。
Cold welding process should be adopted with strict requirements for technical operational procedure, and technical problems for tyre welding on site can be solved.
天然气管道在制造过程中，由于焊接工艺会产生各种缺陷及裂纹。
Various defects and cracks may be produced in the welding process in natural gas pipeline.
该单位生产的核燃料组件在制造过程中必须经过多种无损检测，其中在焊接工艺之后进行外形综合尺寸的检测就是重要部分。
As for the nuclear power safety, a variety of non-destructive testing on the production of nuclear fuel assembly is required during the manufacturing operation in NPIC.
结果表明，表面处理过程(研磨、抛光、侵蚀液体及工艺等)对镁合金硬度的影响很大，直接影响到“焊接工艺-硬度”之间关系。
Surface treatment such as grinding, polishing, etching influences significantly the hardness of magnesium alloy and the relationship between welding process and hardness.
在堆焊过程中，调节磁场参数和焊接工艺进行实验，测试了不同参数下的堆焊层硬度、磨损性能以及分析了其显微组织。
The properties of the surfacing layer was improved by the effect of magnetic field. The parameters of magnetic field and welding were altered during welding process.
介绍了螺旋埋弧焊过程中焊缝几何形状计算机控制系统的硬件设计和软件实现方法，并对预测焊接工艺参数的专家系统进行了测试。
This article has described the hardware design of the computer control system for the welds geometry during the process of SSAW as well as its software development.
介绍了螺旋埋弧焊过程中焊缝几何形状计算机控制系统的硬件设计和软件实现方法，并对预测焊接工艺参数的专家系统进行了测试。
This article has described the hardware design of the computer control system for the welds geometry during the process of SSAW as well as its software development.
应用推荐