• 使用焊接保护气体流量开关PLC控制系统信号问题简单检测允许

    Use the Weld Shield Gas Flow Switch to give your PLC or control system a signal that allows for simple detection of flow problems.

    youdao

  • 焊接保护气体流量开关是专恶劣焊接应用可以保存焊接环境典型条件

    Lake's weld Shield Gas Flow Switch has been developed specifically for use in harsh welding applications and will hold up to the typical conditions of the welding environment.

    youdao

  • 研究试件表面处理状态保护气体激光输出功率焊接速度激光脉冲频率工艺参数焊接质量影响规律

    The influence of the parameters such as surface treatment state, laser output power, welding speed, protective atmosphere, and pulse frequency on the welding quality was studied.

    youdao

  • 气体保护塞焊,焊接封闭内侧灯罩之间接合处。

    Plug-weld the connection between the closing panel and the inner light housing under shielding gas.

    youdao

  • 连接可用冲压成型的钢质菱形气体保护焊接方法点焊于钢板上。

    Layer can be used to connect steel stamping forming diamond-shaped network, with gas shielded welding spot on the plate.

    youdao

  • 间隙MIG(熔化极气体保护焊)一种先进质量焊接方法。

    Narrow gap MIG welding is an advanced welding technic with high quality.

    youdao

  • 针对奥迪轿车消音器材料结构接头形式研制了适用于消音器焊接熔化气体保护自动设备焊接工艺进行研究。

    In order to solve Audi car muffler welding problems, a MIG automatic welding process and equipment arc developed which is suitable for the material, structure and joint type of the muffler.

    youdao

  • 双丝间接电弧气体保护一种新的焊接方法

    Twin-wire indirect arc gas shielded welding is a new welding technology.

    youdao

  • 介绍一台适合于钛合金其它活性金属惰性气体整体保护焊接设备结构部分功能、设备的工作原理及使用效果。

    This paper introduces the structure of an inert gas -shield equipment for titanium alloy and other active metal welding , functions of its corresponding parts and its working theory.

    youdao

  • 试验结果表明采用惰性气体保护焊接必要性

    Our experimental results indicate the necessity of using inert gas as a protective measure in obtaining satisfactory welding effects.

    youdao

  • 由于电弧回路结构不同间接电弧气体保护焊接过程单丝焊更加稳定

    Because of the difference of arc circuit, the welding process of twin-wire indirect arc gas shielded welding is more stable than single wire welding.

    youdao

  • 焊接材料韧性气保焊丝WER60保护气体

    The welding materials are high toughness welding wire WER60 and rich argon shielding gas.

    youdao

  • 气体保护对接焊接外侧梁。

    Weld the outer side member with a full butt weld under shielding gas.

    youdao

  • 间接电弧气体保护一种新的焊接工艺

    The twin-wire indirect arc gas-shielded welding is a new welding technology.

    youdao

  • 分析激光功率焊接速度焦点位置焊接过程影响以及保护气体焊接过程不稳定性影响。

    The influence of laser power, welding speed and the focus position to the laser welding process as well as the assist gas to the instability of the welding process are analyzed.

    youdao

  • 不锈钢SUS304作为试验对象,分别研究焊接速度、散离焦量、激光功率保护气体等工艺参数以及活性剂和活性元素硫不锈钢yag激光焊焊缝成形影响

    The effects of welding speed, defocusing distance, laser power, shielding gas, activating flux and activating elements on weld shape in YAG laser welding of SUS304 stainless steel was studied.

    youdao

  • 介绍一种用于焊接现场气体保护焊的自动设备设备精确控制气体混合比例

    This paper introduced an automatic air mixing equipment for gas protection welding at work site, which can control the accurate proportion of airs.

    youdao

  • 介绍采用不锈钢药芯焊丝CO2气体保护焊接不锈钢储罐工艺过程

    Technological process of CO2 gas shielded metal arc welding with stainless flux cored wire used for stainless steel tank construction is presented in this paper.

    youdao

  • 简体中文标题焊接消耗品。强度气体保护弧焊焊丝电极焊丝焊条沉积金属。分类

    English Name: welding consumables - wire electrodes, wires, rods and deposits for gas-shielded arc welding of high strength steels - Classification.

    youdao

  • 根据熔化极焊丝填充特性焊接普遍应用药芯焊丝CO_2气体保护焊和埋自动焊进行焊接试验

    According to the characteristics of arc welding with filler wire, experiments about the FCAW-CO_2 and SAW which is commonly used in steel bridge welding were carried out.

    youdao

  • 熔化气体保护熔滴过渡数值模拟作为焊接学科前沿领域研究热点之一,近年已经取得了较大的进展

    The technology of numerical simulation for metal transfer in GMAW is one of the front and research hotspot in the weld filed , which has achieved great progress in recent years.

    youdao

  • 双丝共熔池气体保护TCGMAW)的熔滴过渡对焊缝成形以及焊接质量具有重要影响

    The droplet transfer in the twin-wire co-pool gas-shielded metal arc welding(TCGMAW) process greatly affects the welding seam appearance and the welding quality.

    youdao

  • 探讨焊接工艺参数包括激光功率焊接速度、正反面保护气体流量焊接效果的影响。

    The effect of processing parameters including laser power, welding speed and protection gas flow on the welding quality was researched in this paper.

    youdao

  • 介绍焊接时的气体保护

    This paper introduces gas-shield for Ti welding.

    youdao

  • 应用TIG焊接钛合金时,气体保护问题常常决定焊接质量关键。

    In TIG welding of titanium alloys, the welding quality usually depends on the gas shielding.

    youdao

  • 应用高效气体保护熔化电弧焊焊接铝合金薄板时,容易出现穿焊接缺陷

    Welding defects such as collapse of molten pool, burning through, would like to happen in the high efficient gas shielded metal arc welding.

    youdao

  • 可以氩弧焊(GTAW)制备气焊缝,这种焊接方法可以用来测试材料的可焊接性,检查气体保护使用以及焊接参数设定

    An autogenous weld is produced by GTAW and can be used to test material weldability and gas shield usage, and to set welding parameters.

    youdao

  • 简体中文标题:焊接相关工艺接缝制备建议手动金属电弧焊气体保护金属电弧焊、气焊、TIG焊接

    English Name:Welding and allied processes - Recommendations for joint preparation - Manual metal-arc welding, gas-shielded metal-arc welding, gas welding, TIG welding and beam welding of steels.

    youdao

  • 本文研究镀锌板激光焊接影响,以及不同保护气体对镀锌板焊接性的影响。

    This paper studies the effect of zinc and shielding gas type on Laser weldability of zinc-coated steels.

    youdao

  • 本文研究镀锌板激光焊接影响,以及不同保护气体对镀锌板焊接性的影响。

    This paper studies the effect of zinc and shielding gas type on Laser weldability of zinc-coated steels.

    youdao

$firstVoiceSent
- 来自原声例句
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定