发现采用不锈钢材料和耐热陶瓷作为回热器的材料还有一些问题有待解决；
It is concluded that some problems of adopting stainless steel and refractory ceramics as materials for high-temperature recuperators remain to be solved.
鉴于我国市内公共汽车柴油机的平均排气温度很低，在捕集器的前端装了一个燃烧器，定期对陶瓷滤芯进行热再生。
Because of low exhaust temperature of the urban bus engine, a diesel fueled burner was installed on the trap to regenerate thermally the ceramic element.
无机涂层有电镀、转化层、热喷涂、热浸渍、熔炉熔融、或在材料表面涂上薄膜、玻璃、陶瓷。
The inorganic coatings perform electroplatings, conversion coatings, thermal sprayings, hot dippings, furnace fusings, or coat thin films, glass, ceramics on the surfaces of the materials.
陶瓷行业：轻质窑车结构与窑炉的热面衬体。
Ceramic Industry: Structure and light trucks kiln furnace hot face lining of the body.
采用溶胶-水热法，在较低的温度下已成功地合成了多种结晶良好的纳米或亚微米钛基钙钛矿型陶瓷粉体。
Many kinds of well-crystallized nanometer or submicron Ti -based perovskite ceramic powders were already synthesized successfully by sol-hydrothermal method at lower temperatures.
在炉缸底部炭砖热面筑砌一层陶瓷垫，直接影响炉底渣铁凝固层的形成。
Lining a layer of ceramic pads at the bottom of hearth can directly influence the slag-pig solidified layer.
许多陶瓷都是电和热的良绝缘体。
介绍了采用陶瓷坩埚用高频加热-热导法测定钢铁、铜、铌、钽、钛中的氢。
This article described the determination of hydrogen in steel, copper, niobium, tantalum and titanium with ceramic crucible by high frequency induction-thermal conductivity method.
介绍了热等静压的优点和工艺技术及其在磁性材料、陶瓷等领域中的应用。
Advantages, and techniques of hot isostatic presses and its application in the field of magnetic material, and ceramics are introduced.
纺织陶瓷基复合材料在航空航天器的热端部件有着广阔的应用前景。
Ceramic matrix textile composite has been widely used as components in hot end of aeronautics and astronautics.
在PZT中通过掺杂得到了本体“黑”化的PZT热释电陶瓷。
The self-darken pyroelectric ceramic has been obtained by doping in PZT.
用热等静压法烧结制备了高导电性ZAO（铝掺杂氧化锌）陶瓷靶材，并用直流磁控溅射法制备出ZAO透明导电薄膜。
Aluminum-doped zinc oxide (ZAO) ceramic targets for sputtering were fabricated by hot isostatic pressing (HIP) and ZAO transparent conducting thin films were prepared by dc magnetron sputtering.
利用融盐热歧化反应进行了氮化铝陶瓷表面钛金属化沉积的动力学研究。
The kinetics of titanium deposition on AlN ceramic surface by heat disproportional reaction was studied.
研究了结构陶瓷电火花加工热影响层厚随脉冲参数变化的规律以及蚀除机理的各种分离方式作用效应的变化规律。
This paper deals with the regularities of the thickness of thermal damage surface and effect of all of the mechanisms in EDM of structural ceramics .
首次采用一次原位水热晶化法在多孔陶瓷载体表面成功制备出TS - 1沸石分子筛膜。
The TS-1 zeolite membrane was successfully obtained on the ceramic carriers by one-step in-situ hydrothermal synthesis.
本文系统地研究了利用融盐热析出反应进行陶瓷材料表面改性及制备复合材料的机理和工艺。
The mechanism and process of ceramic materials' surface metallization by molten salt reactions have been investigated.
以固体光声效应的RG理论为依据，用光声法测量了压电陶瓷材料PZT的热参量。
According to the RG theory of the photoacoustic effect with solids, the thermal parameters of PZT ceramic material have been measured by using photoacoustic method.
在采用SHS铝热-重力分离技术制备陶瓷内衬复合管的基础上，研究了陶瓷涂层的合成机理及相应添加剂在合成过程中的行为。
Based on producing ceramic lined composite pipes by gravitational separation SHS method, the synthesis mechanism and additive behavior for lined ceramics were studied.
本文首先介绍陶瓷窑炉方面热工理论的研究以及神经网络在陶瓷工业中的应用情况。
Firstly, the research of thermal theory in kiln hood and the application of neural network in ceramic industry are introduced.
利用某些有机烷氧基金属化合物的热分解，可在玻璃、金属、陶瓷或半导体基片上沉积相应的金属氧化物次级发射膜。
A metal-oxide secondary emission film can be deposited on glass, ceramic or semiconductor substrates by thermal decomposition of an organo-metal alkoxide.
研究了热懈温度和保温时间对陶瓷产率、线收缩率、力学性能以及微观结构的影响。
The effects of pyrolysis temperature and soaking time on ceramic yield, linear shrinkage, mechanical properties and microstucture were investigated.
就我国首例使用陶瓷球换热技术及水冷长炉龄冲天炉的使用维修和冲天炉的热能综合利用进行了总结和探讨。
Use and repair of ceramic ball heat exchange technique and water cooled cupola with long service life as well as heat energy comprehensive use have been summarized and explored.
但是，陶瓷材料的致密化对其力学、抗热震和热疲劳性能有至关重要的影响。
But the densification of ceramic materials is vitally important to mechanical, thermal shock and fatigue properties.
介绍了目前制备铌酸盐陶瓷粉体所用方法，重点说明了水热法在碱金属铌酸盐陶瓷材料制备中的研究和应用现状。
The preparation methods of niobate ceramic powders are introduced and the current status of studies and applications of hydrothermal processing were analyzed emphatically.
采用SHS铝热-重力分离法制备了陶瓷贻复合钢管。
The ceramic lined composite pipes were produced by gravitational separation SHS method.
研究了用于瓦斯气体吸附分解的多孔碳化硅陶瓷，并设计了多孔碳化硅陶瓷瓦斯热解装置。
Porous SiC ceramic that is used in gas adsorption and pyrogenation is studied. The equipment of porous SiC ceramic gas pyrogenation is designed.
同时进一步研究了陶瓷热涂层热物理性能参数对温度场的影响。
At the same time, some physics parameters are studied to illustrate the effect to temperature fields.
通过硼改性中空陶瓷微珠的热反射作用以及红外辐射材料的幅射致冷作用，赋予该涂料优异的隔热性能。
The paint has excellent thermal insulation by heat reflection of boron modified hollow ceramic micro-sphere and radiation cooling of infrared radiation material.
利用SHS铝热离心铸造技术制备的陶瓷内衬复合钢管具有优异的耐磨损性能，可广泛地应用于矿山、电力、建材等工业部门。
The composite steel pipe made by the technology of SHS thermit centrifugal casting has excellent wear resistance and can be widely used in mines, electric power and building materials industry.
利用SHS铝热离心铸造技术制备的陶瓷内衬复合钢管具有优异的耐磨损性能，可广泛地应用于矿山、电力、建材等工业部门。
The composite steel pipe made by the technology of SHS thermit centrifugal casting has excellent wear resistance and can be widely used in mines, electric power and building materials industry.
应用推荐