用差热-热重分析、X射线衍射、红外光谱等手段对样品进行表征。
The properties of the product were characterized by thermogravimetry-differential thermal analysis, X-ray diffraction and Fourier infrared transmission spectroscopy.
目的探讨热重(TG)、差热(DTA)分析技术在药物配伍禁忌研究中的应用意义。
Objective: To study the application of thermogravimetry (TG) and differential thermal analysis (DTA) in incompatibility of drugs.
用元素分析，电导，磁化率，红外，紫外与可见光谱，差热一热重分析等方法对配合物进行了表征。
These complexes have been characterized by elemental analysis, magnetic susceptibility, molar conductance, IR and UV-Vis spectra, differential thermal analysis and thermogravimetry.
论述了示差扫描热分析(dsc)和热重分析(TG)在研究非晶态合金退火转变动力学方面的应用。
Applications of differential scanning calorimetry (DSC) analysis and thermal gravity (TG) analysis in the study on kinetics of annealing transformation of amorphous alloys have been discussed.
用x -衍射、红外光谱、差热、热重、分光光度等方法对其组成和结构进行了研究。
XRD, IR, DTA, TG and spectrophotometric analysis were used in the research of the composition and structure of the products.
准确而快速地评价各级加热器端差的运行热经济性，对热力系统的设计、运行和检修具有十分重要的意义。
Evaluating exactly and fast heat economy of unit caused by heater terminal temperature difference is significant meaning for the design, operation and repair of thermodynamic system.
介绍了包覆条件对石墨表面改性的影响，对改性后的石墨进行了形貌观察、接触角测定、差热-热重分析。
The effects of preparing conditions on surface modification of graphite were introduced. The morphology observation, contact Angle determination and TG-DTA analysis were carried out.
采用热重和示差扫描量热技术(TG - DSC)对改性前后煤沥青的热解行为进行了分析。
Thermal behavior of modified coal tar pitch was analyzed with thermogravimetric and differential scanning calorimetry (TG-DSC).
利用热重-差示扫描量热法（TG-DSC）对六甲氧基甲基三聚氰胺（HMMM）与松香树脂酸的反应进行了研究。
TG-DSC method was used to study the affecting factors of the reaction between Hexakis(methoxymethyl)melamine(HMMM)and rosin acids and its kinetics.
并采用X—射线衍射分析、扫描电镜和差热差重分析，研究了复合蓄热材料的性能和结构。
Structures and properties of these materials were studied by X-ray diffraction (XRD) analysis, scanning electronic microscopy (SEM) observation and differential scanning calorimetry (DSC) analysis.
研究了一种耐热聚乳酸，并对其进行了红外光谱、示差扫描量热分析、热重分析、X-射线衍射、热收缩及断裂强力等测试。
The heat resistant poly(lactic acid) was studied, the structure and properties were characterized by FTIR, DSC, TG, X-ray diffraction, heat shrinkage and breakage strength.
用差热-热重分析确定了最佳偶联反应的条件。
The optimum coupling reaction conditions were determined by difference scanning calorimetry-thermogravimetric analysis.
通过热重-差热（TG）、红外光谱（IR）、X衍射分析（XRD）、透射电镜（TEM）等分析方法表征其前驱物及金属氧化物。
The characteristics of those precursors and metal oxides were analysised by TG-DTG, IR, XRD, TEM and so on.
采用TGA- 92型热重—差热综合分析仪，对秸秆、桉树木废料、花生壳、稻草、大豆杆及棉杆进行燃烧特性分析。
The burnable characteristics of straw haulm, eucalypt waste, peanut shell, straw, soybean pole and cotton pole were analyzed with TGA-92 heat heavy-difference heat integrated analyser in this paper.
用差示扫描量热法、热重分析法和拉伸试验法等测定了CDA—PLLGA的玻璃化温度、熔点、热失重性能、拉伸强度和降解性能。
The glass transition temperature Tg, melt point Tm, thermogravimetric curve, tensile strength and degradation rate of this blend were determined by DSC, TGA, tensile test and degradation test.
烧结制度是经过差热-热重分析（TG-DTA）来确定的。
The sintering procedure is confirmed by differential thermal analysis and thermal gravimetric analysis(TG-DTA).
通过差示扫描量热法、热重分析、扫描电镜对定形复合相变材料进行测试分析，结果表明用于墙体的混合醇和活性炭制成的定形相变材料中混合醇的含量为40%时最合适。
Through DSC, SEM, TG testing, results show that the 40% content of mixed alcohol is the most appropriate in the form-stable phase change materials.
用不同链长的有机胺柱撑镧铌酸，采用X射线衍射、热重、差热等分析方法对合成的各种产物进行表征。
Amine-pillared lanthanum niobates with different chains length as pillars were characterized with XRD, TG and DSC.
热重分析(TG)和差热扫描量热法(dsc)分析表明，MAPP的热分解温度与APP相当，很好地保持了APP作为阻燃剂的特性。
Furthermore the MAPP was determined by TG and DSC, the decomposition temperature of MAPP was in line with APP and keeped the flame retardant properties aswell as APP.
通过环球法和加特纳法分别测定这类物质的软化点及评定其色价、等级，并测定了这类物质的红外光谱、紫外光谱、 荧光光谱和差热-热重变化。
The softening point of these materials was determined by ring and ball method. The gardner method was used to evaluate the colorimetry and grade. The materials were characterized in detail by IR.
由CRT实时显示所采集的差热、热重、微商热重和样品温度四种参量的数据，并能打印和绘制出所需要的结果。
The data of DTA, TG, DTG, T and sample temperature can be displayed on CRT, and the required results can be printed and plotted.
用TG - DTA差热热重联用分析仪对影响医疗垃圾热解特性的主要因素，包括垃圾种类、升温速率、试样质量、实验终温和保温时间等进行了实验研究。
The main influence factors on thermal decomposition of medical waste, such as sample type, heating rate, sample mass, end-temperature and heat-insulation time, were investigated by using TG-DTA.
我们用热重、差热和红外光谱法研究了GS-401烧蚀有机硅树脂的热降解反应。
The thermodegradation of GS-401 ablative silicone resin was studied with TG, DTA and IR.
本文利用差热与热重分析研究了软玉的热稳定性。
This paper deals with the thermal stability of nephrites in terms of DTA and TGA.
利用凝胶色谱（GPC）、热重分析（TGA）、表面张力仪和差示扫描量热（DSC）法等对增塑剂环烷油的分子结构及其基本性能进行了表征。
The molecular structure and some basis performances of a plasticizer(namely naphthenic oil) were characterized by GPC, TGA, surface tension meter, DSC and other methods.
紫外-可见光谱、微区能谱扫描、高分辨率透射电镜分析、元素分析、热重-差示扫描量热等分析证实了C_（60）对金属纳米团簇表面的修饰；
UV-Vis, Energy dispersive spectroscopy, Element analysis, TG-DSC or TG-DTA indentify that surface of metal nanoclusters was decorated by C_(60);
用X射线衍射、X射线荧光光谱分析、差热-热重及透射电镜等分析方法对产品进行了组成、形貌和粒径分析，获得了理想的结果。
The composition, appearance and grain size of dysprosium fluoride product have been characterized by XRD, TG, DTA, TEM and X-ray fluorescence analysis. The results show th...
用X射线衍射、X射线荧光光谱分析、差热-热重及透射电镜等分析方法对产品进行了组成、形貌和粒径分析，获得了理想的结果。
The composition, appearance and grain size of dysprosium fluoride product have been characterized by XRD, TG, DTA, TEM and X-ray fluorescence analysis. The results show th...
应用推荐