并对产物进行了理化性能及热稳定性测试。
The physical and chemical behaviors and heat stability of products were determined.
热稳定性测试表明表面改性层非常稳定并具有良好的结合性。
The thermal shock resistance test indicates that the surface modification cladding is very stable and shows firm adherence.
测试了基体和熔块的线膨胀系数、釉的熔融温度范围、釉面的白度、显微硬度和热稳定性等性能。
The coefficient of linear expansion of the body and glaze, the melting temperature range, the whiteness, the microhardness and the heat stability of glaze were tested.
用TEM、SEM、XRD和EDS等对不同工艺条件下获得的产物进行了表征，对其热稳定性进行了测试。
The products obtained at different conditions were characterized by means of TEM, SEM, XRD, EDS and the thermal stability of the products was tested.
测试及用户试用的结果均表明，CZ- 601在加工性能和热稳定性上与进口同类产品相当，可以替换使用。
The results showed that CZ-601 was comparable to and could replace the imported product of the same kind in processability and heat stability.
测试结果表明，该储能材料具有较高的相变潜热和较好的热稳定性，因此可被应用于储能和热能回收系统中。
The results show that the material has higher latent heat and better thermal stability, so it can be used in thermal energy storage and heat recovery system.
对白炭黑对胶粘剂的热稳定性的影响进行了测试，研究了白炭黑的加入量和胶粘剂的固化条件对耐焊时间的影响。
Through testing the thermal stability of silica and adhesives, we study how the amount of silica and the cure of adhesives affect the soldering time.
涂层相关性能测试表明涂层具有优异的热稳定性、光学性能、耐介质性以及良好的加工性能。
The relevance property tests suggest that the coating prepared by this paper has excellent thermal stability, optical property, solvent resistance and good artifactitious property.
应用XRD、DTA-TGA、IR、BET等测试手段对复合膜的物相组成、热稳定性、孔结构进行表征。
The phase constitution, thermal stability, and the pore structure were characterized by means of XRD, DTA-TGA, IR, BET etc.
通常，原料药的评估应当在测试其热稳定性的存储条件下(包括合适的公差)进行。
In general, a drug substance should be evaluated under storage conditions (with appropriate tolerances) that test its thermal stability and, if applicable, its sensitivity to moisture.
通过热失重实验，对其热稳定性进行了测试。
And the thermal stability was taken by thermogravimetric measurements.
测试了其粉末倍频效应、透光范围、热稳定性、并估算了其能隙大小。
The powder SHG, transparent ranges, band gap and thermal property was tested.
并采用IR光谱，X-射线粉末衍射测试手段对其进行分析，并对产物的热稳定性进行了研究。
They were characterized by FT-IR and XRD. In addition, We have studied their thermal stability.
研究了浸渍和SDAR合成条件与SDAR对N_（235）的吸附率的关系及N_（235）在SDAR基体上的分布情况，测试了SIR的孔结构及热稳定性。
The effects of some synthetic conditions on the adsorption capacities of the SDAR for N235, and the distribution of N235 in the SIR . , and the pore structure of SIR were studied.
研究激光形成非晶态的工艺条件与其表面硬度以及磨蚀及腐蚀的关系，并对非晶层的热稳定性进行测试。
The relationship was studied among the formation condition of the amorphous state and the surface hardness, abrasion and corrosion, and the heat endurance of the amorphous state was tested.
第四部分是建立在第一部分所测试曲线的基础上的，是通过常温下的磁性能来间接推算出磁体热稳定性的方法。
The method is basis on the curves measured in the first part. Combining with the calculative formulas, experiments are made on samples of NdFeB materials to prove the feasibility of this method.
通过元素分析、IR、UV、XRD、TEM、TG DTA、TPR等测试手段对其组成、结构、颗粒大小、热稳定性以及表面性能进行了表征。
Their general molecular formula were characterized with elemental analysis, ir, UV, XRD, TEM, TG-DTA and TPR techniques.
通过元素分析、IR、UV、XRD、TEM、TG DTA、TPR等测试手段对其组成、结构、颗粒大小、热稳定性以及表面性能进行了表征。
Their general molecular formula were characterized with elemental analysis, ir, UV, XRD, TEM, TG-DTA and TPR techniques.
应用推荐