热连轧；热模拟试验；变形抗力；本构方程；数据库。
Hot continuous rolling; Thermal simulation experiment; Deformation resistance; Constitutive equation; Database.
介绍了一套COREX竖炉还原热模拟试验装置及试验结果。
A hot simulation equipment of COREX shaft and its experimental results are introduced.
在自行研制的热态试验炉上对圆孔型铜冷却壁进行了热模拟试验。
The hot test of the copper cooling stave with circular channels was done in the test furnace designed by the authors.
研制了一台空间辐射制冷器热模拟试验专用的清洁无油环境模拟设备。
A clean space simulator specifically used for radiant cooler was developed in our institute.
本发明涉及钢种的研发技术领域，特指一种钢种热模拟试验材质控制方法。
The invention relates to an iron thermal analog test material quantity control method in the field of iron researching technology.
为了深入研究溅渣护炉的基本原理，在试验室进行了溅渣护炉小型热模拟试验。
The hot model experiment of slag splashing in laboratory has been made to investigate basic principle of slag splashing.
通过单道次压缩热模拟试验，得到了BS 700 MC的真应力-真应变曲线。
Through single pass thermo-simulation compression experiment, the true stress-strain curves were obtained for BS700MC.
采用热模拟试验方法探讨了灰口铸铁焊接接头热影响区的奥氏体区组织对接头性能的影响。
The use of cast steel enables a designer to take such steps as simplifying the structural connections and avoiding difficult welding requirements.
采用焊接热模拟试验和冲击试验，研究了X80管线钢焊接热循环对粗晶区组织性能的影响。
The influence of welding thermal cycle on structure and properties in grain-coarsening region of X80 pipeline steel was investigated by weld thermal simulation technique and the charpy test.
通过焊接热模拟试验和冲击韧性试验，研究了不同预热温度对X80级管线钢组织性能的影响。
Welding thermal simulation technique is adopted to study the influences of twice thermal cycle on the structure and properties of X80 pipeline steel.
通过焊接热模拟试验和冲击韧性试验，研究了不同预热温度对X80级管线钢组织性能的影响。
The effect of hot bending and heat treatment thermal cycles on the mechanical properties of X80 grade steel pipe was evaluated.
对原始组织为铸态和热轧态的2205双相不锈钢试样进行了不同条件下的固溶处理热模拟试验。
The solution treatments were performed with the specimens of 2205 duplex stainless steel, which possessed different initial microstructures.
采用焊接热模拟试验方法研究了2219铝合金双丝焊热影响区的微观结构和力学性能的变化规律。
Microstructure and mechanical properties changing rules of 2219 Al-alloy HAZ (heat-affected zone) with twin wire welding were studied using welding thermal simulation method.
在热模拟试验机上研究了控轧控冷工艺对微合金化低碳贝氏体型非调质钢组织性能的影响，并探讨了贝氏体转变机制问题。
The effect of TMCP parameters on microstructure and property was studied, and a controversial question about bainite transformation mechanism also was discussed.
本文利用热模拟试验机对高性能耐火耐候建筑用钢WGJ510C2的奥氏体连续冷却转变（CCT）图进行了测定和分析。
Thermo-simulation was used to analyze the continuous cooling transformation(CCT) diagram of high grade of fire-resistant and weatherability construction steel WGJ510C2.
采用焊接热模拟试验方法研究了在焊接热循环和应力-应变循环同时作用下，2090铝锂合金焊接热影响区显微组织和力学性能的变化特征。
The variation of microstructure and mechanical properties of the welding heat-affected zone of 2090 Al-Li alloy were investigated by means of the welding thermal, simulated and strain cycles test.
在航天器地面热试验中，空间热流的模拟是一个非常复杂而重要的问题。
The simulation of Space heat flux is a very complicated and important problem in ground thermal testing of spacecraft.
为此，对液化石油气储罐在池火灾环境下的热响应情况进行了大量的模拟试验研究。
Therefore, many simulation tests are conducted for the thermal response of LPG tanks when they are exposed to the pool fire.
通过本文的试验研究和数值模拟，说明可以通过在高彻体力场中构造出一个封闭循环微小通道，利用通道内流体的热驱动达到强化冷却的目的；
All the numerical simulations and experiment studies in this thesis show that heat transfer can be enhanced using the liquid's thermally driven in a micro-circular enclosure in high body-force field.
针对食品冷冻冷藏过程中货物热负荷不断发生变化的情况，设计了模拟变负荷食品试验箱。
The simulative variable load food test chamber is designed according to the constant change of heat load in the process of food refrigeration.
提出了采用热扭转试验来模拟金属材料热变形时塑性变形程度与晶粒大小相互关系的方法。
The method of relationship between plastic deformation degree and grain size was put forward, when the thermos-deformation of metal was simulated by the thermos-torsion test.
设计并建造了冷却壁热态试验系统，对铸钢冷却壁和球墨铸铁冷却壁的换热效果进行了工业模拟试验。
The thermal test system of cooling stave was designed and established to put up the industrial experiment of the heat transfer for the cast steel cooling stave and ductile iron cooling stave.
在小型滴管炉内进行了采用生物质废弃物作为再燃燃料还原模拟烟气中NO的热态试验。
Adopting biological wastes as reburning fuel to reduce NO in simulated gas, hot test has been carried out in a small dropper tube furnace.
文章介绍了航天器的热控涂层试验，用改变入射质子和电子能量的办法，模拟同步轨道辐射环境。
Experiments were designed and conducted on spacecraft thermal coating to simulate an absorbed dose profile from synchronous altitude radiation by varying the energy of incident electrons and protons.
在模拟筒仓条件下，对接种霉菌的高水分玉米自然发热和在仓内玉米中的热转移进行试验。
The heating test of the wet corn which was inoculated mould in corn bulk of simulated silo was conducted.
本文采用热态试验和数学模拟的方法，研究了金属板坯在快速冲击加热炉内被射流冲击加热时的内外部传热机构。
The mechanism of heat transfer during sheet metals heating with impinging jet in a rapid heating furnace is studied with experiments and mathematical simulating methods.
介绍了热动力环境模拟试验设备的设计，并分析了测控系统硬件、软件结构。
The design of the thermodynamic environment simulation test equipment is introduced and the software and hardware structures of measurement and control system are analyzed.
主要介绍了热浸镀模拟试验机的系统设计、控制策略和重要回路。
This paper presents the system design, control tactic and main circuit of control system for hot-dip galvanizing simulator.
长输管道内的油流具有复杂的热历史和剪切历史，从相似性上说，只有管路试验才有可能对其进行模拟。
Oil in pipeline has complicated heat-history and shear-history, which can be simulated only by instrument of pipe-flow if similarity is considered.
描述了空间相机的热环境模拟试验的过程，探讨了用CAT技术实现热环境的方法和途径。
The process of simulative test of thermal circumstance is reported in this paper , the method of achieving thermal circumstance by CAT is investigated.
应用推荐