本文用偏光显微镜和示差扫描量热计（DSC）方法研究了碛纤维对聚丙烯结晶行为的影响。
Polarizing microscopy and differential scanning calorimetry (DSC) were used to study the effect of carbon fiber on the crystallization of polypropylene (PP).
并且借助于偏光显微镜、广角X-射线衍射仪（WAXD）和差式扫描量热仪（DSC）研究了不同成膜条件下膜的结晶情况。
And polarizing microscope, wide-angle X-ray diffraction (WAXD) and differential scanning calorimeter (DSC) were used to study the crystalline of PLA membranes prepared at different conditions.
用金相显微镜及X射线衍射仪对形变含稀土低碳钢热浸镀铝的镀层微观组织进行了分析，并探讨了其形成机制。
The microstructure of hot-dip aluminum coat of deformed low-carbon steel containing RE has been analyzed by metallography microscopy and XRD, and the forming mechanism has also been discussed.
并用示差扫描量热分析和偏光显微镜进行表征，确定其相变温度和液晶织构。
Its liquid crystalline phases were studied using differential scanning calorimeter (DSC) and a polarizing microscope with a hot stage.
聚合物的液晶行为用DSC、偏光显微镜和X射线衍射进行了表征，发现单体有热致液晶性；
The liquid crystalline behavior of the copolymers was characterized by DSC, polarizing microscopy with a heating stage and X ray diffractometer.
采用光学显微镜和透射电镜研究了锆处理对微合金钢粗晶热影响区组织的影响。
Microstructure of simulated coarse grain heat affected zone (CGHAZ) of Zr Microalloyed HSLA Steel are investigated using optical microscopy and transmission electron microscopy.
电镀薄片可以用来制备光学显微镜、扫描电镜及透射电镜的观察样品，而且可以用来进行粉末的热片进及业余末的显微维氏硬度测试等实验。
The plated sheet can be used to prepare the specimen for optical microscopy, SEM and TEM, it can also be used for the heat-treatment and the microhardness test of the powders.
用差热扫描量热仪和偏光显微镜检测其液晶性。
Their properties are characterized by DSC and polarizing microscopy (POM).
用电子显微镜和热重分析表征了纯化效果，并初步分析了纯化机理。
The purification mechanism is based on the difference of tensile strength and dispersibility of thin long CNTs with that of carbon fibers.
采用差示扫描量热仪（DSC）研究稀土6061合金及其基体合金材料的时效析出序列，采用金相显微镜观察了稀土6061合金及其基体合金材料的显微组织。
The precipitation procedure of 6061-La and 6061 alloy was studied by differential scanning calorimetry (DSC). The microstructure of 6061-La and 6061 alloy was observed by metallurgical microscope.
通过显微镜观察和X -射线衍射分析方法，研究用热爆裂法除去二氧化硅微粉中杂质的过程。
The process of impurity removing from fine silica powders with thermal crack method is investigated by means of DTA and XRD.
热台偏光显微镜观察表明：该沥青具有良好的中间相转化行为。
Excellent mesophase pitch from this pitch was observed under hot stage optical microscope.
用扫描电子显微镜和能谱仪对钨和铜以及不锈钢的热等静压焊接试样的焊接界面进行了分析研究。
The SEM and EDS were used in this paper to analysis the welding interface of the specimens of tungsten and copper, copper and stainless steel made by HIP welding.
本文首先对热波电子显微镜成象机理和特性进行了分析。
In this paper, the mechanism and feature of TWEM are analyzed and studied.
聚酯的热性质以TGA、DSC、热台偏光显微镜研究。
The thermal properties of polyesters were investigated with TGA, DSC and polarizing microscope.
用溶剂法制备了稀土铝镀层，采用金相显微镜、扫描电镜观察测定了超声场对热浸镀稀土铝表面层厚度的影响，绘制了表面层厚度变化的动力学曲线。
The influence of ultrasonic field on the growth of surface layer of HDA REAl coating has been studied by MOM and SEM, and the growth of surface layer with time has been drafted.
用示差热分析（DSC），热重分析（TG）和偏光显微镜（POM）研究了材料的热性能和结晶行为。
The thermal properties and crystallization behaviors were studied by means of differential scanning calorimetry (DSC), thermogravimetry (TG) and polarizing optical microscopy (POM), respectively.
本文介绍了用扫描电子显微镜和俄歇电子谱仪观察和分析雾化态和热等静压态高温合金粉末颗粒的表面。
An investigation of the surface of Ni-base superalloy powder particles in both as-atomized and as-HIP' ed conditions has been presented in the paper.
采用高温显微镜、同步热分析、热膨胀实验等方法，系统的研究了亚微细硬质合金的烧结特性。
In this thesis, some test methods, such as Heating Microscope, DTA-TG, Thermal Dialation Testing, were used to research the sintering properties of cemented carbide in submicron grain, systematically.
对薄膜样品进行了红外光谱分析和热分析，测定了力学性能，在扫描电子显微镜上观察了薄膜拉伸断面。
The PEN/PP films were characterized by FTIR and thermal analysis, the mechanical properties were tested, the tensile fracture surfaces of PEN/PP films were observed by SEM.
用热台偏光显微镜，DSC和X光衍射方法研究了热致液晶的相转变行为，确认了这十种聚酯酰胺均为向列型热致液晶。
The nematic thermotropic liquid crystalline behaviour of ten kinds of PEAs obtained was studied by polarizing microscope, DSC and X-ray diffraction.
实验研究了松香型成核剂在聚丙烯（PP）中成核增透效果的影响因素，并通过偏光显微镜（PLM）和差热扫描量热分析（DSC）探讨了其中原因。
Some factors affecting the transparency of the abietyl nucleating agent for PP were studied, and some reasons were investigated by PLM and DSC.
采用偏光显微镜(PLM)、差示扫描量热仪(dsc)、毛细管流变仪和拉伸试验机对透明聚丙烯(PP)的结晶形态、热学、流变性、力学性能进行了研究。
In this paper, the crystalline morphology, thermology, rheology and mechanical properties of clarified PP are investigated by PLM, DSC, Rheometer and stretch tester.
采用场发射环境扫描电子显微镜和差示扫描量热仪研究了复合材料的分散性和结晶性能。
The dispersity and crystallization properties of composites were studied by SEM and DSC. The results showed that the modified MWNTs had better dispersity in the composite than the unmodified one.
运用差示扫描量热分析、动态力学分析、交流复阻抗谱、扫描电镜和原子力显微镜对体系性能和形态进行了研究。
DSC, DMA, complex impedance analysis, SEM, and AFM were used to investigate the properties and morphology of the system.
用热丝化学气相沉积制备了碳纳米管，并用扫描电子显微镜和透射电子显微镜研究了它们的结构。
Carbon nanotubes (CNTs) were deposited by hot filament CVD and their structures were investigated by scanning electron microscopy and transmission electron microscopy.
应用光学显微镜和扫描电子显微镜研究分析了催化裂化装置再生器内U型取热盘管失效的原因。
The causes of failure of the U-type catalyst cooler in regenerator of FCCU were analyzed with optical microscope and scanning electron microscope.
采用表面张力仪、热分析仪对共聚物的表面张力和热力学性质进行分析，利用红外光谱、透射电子显微镜对共聚物的结构和形貌进行了表征。
The surface tension and thermal characteristic of copolymer are analyzed by using surface tension-meter and TA. The structure and transmission morphology are characterized by using IR and TEM.
还借助扫描电子显微镜（SEM）、热分析（ DSC）、广角X射线衍射（ WAXD）、声速等手段研究了UHMWPE熔纺丝在超拉伸过程中结构性能的变化。
The changing of the structure and properties of UHMWPE fibres during super drawing were studied by means of SEM, DSC, WAXD and sound pulsimeter.
还借助扫描电子显微镜（SEM）、热分析（ DSC）、广角X射线衍射（ WAXD）、声速等手段研究了UHMWPE熔纺丝在超拉伸过程中结构性能的变化。
The changing of the structure and properties of UHMWPE fibres during super drawing were studied by means of SEM, DSC, WAXD and sound pulsimeter.
应用推荐