同时还研究了体系的光聚合动力学、机械热性能和力学性能等。
Moreover, their photo-curing properties, dynamic mechanical thermal properties and mechanical properties were also investigated.
研究了熔体扩链产物的相对分子质量、形态结构、热性能和力学性能。
The molecular weight, morphology, structure, thermal properties and mechanical properties were measured.
介绍以单螺杆挤出机进行马来酸酐接枝改性abs，对接枝改性abs的流动性、热性能和力学性能进行了探讨。
Maleic anhydride is grafted on to the ABS with the aid of single screw extruder - the fluidity, thermal properties and mechanical behavior of modified ABS are also discussed.
通过氧指数（OI）、烟密度等级（SDR）、热性能和力学性能的测定，研究了锡酸锌包覆碳酸钙阻燃剂对聚氯乙烯（PVC）电缆料性能的影响。
The effects of Zinc stannate coated CaCO3(ZSC-1) flame retardant on properties of PVC cable material were studied by the tests of OI, SDR, thermal property and mechanical property.
在极高剪切场强度的条件下，GFRPP的力学性能和热性能有所下降。
However, all properties of GFRPP would be deteriorated under the condition of adopting extremely high shearing field strength.
由CTBN中不同的丙烯腈含量所引起的CE与CTBN之间不同的相容性还影响了改性体系的动态力学性能和热性能。
The different compatibility between CE and CTBN caused by various acrylonitrile content in liquid carboxyl terminated rubber also affect the dynamic mechanical and thermal properties of the blends.
而且随着固化温度的提高，胶粘剂体系的固化速度和固化程度还会进一步增加，力学性能、粘结性及耐热性能也会进一步提高。
As the hardening temperature increases, the speed hardening and degree of the adhesive JD increase, the mechanical and adhesion performances of the adhesive systems can be further improved.
分别研究了有机粘土对树脂体系粘度、凝胶特性、力学性能和热变形温度、耐湿热性能等的影响。
The effect of organic rectorite on the viscosity, gel-time, heat deformation temperature, mechanical properties and wet-heat resistant property were researched.
本文旨在制备低成本且力学性能和热性能俱佳的可生物降解脂肪族嵌段共聚物。
This paper aims at preparing biodegradable aliphatic block copolymers with combined mechanical and thermal properties with reduced cost.
结果表明，少量蒙脱土的加入可以较大地提高材料的力学性能和耐热性能，对环氧树脂同时起到了增韧增强的作用。
The results indicated, when compared to the pure epoxy resin, that the mechanical and thermal properties of the nanocomposite could be greatly improved by addition of low clay loading.
三聚氰胺甲醛树脂交联剂可明显改善聚合物水泥基涂料的力学性能、耐热性能和耐水性能。
The mechanical properties and the resistance to water and heat of the polymer modified cement based waterproofing coating are greatly improved by the synthesized melamine resin.
本文主要研究了短纤维-氯丁橡胶复合材料的力学性能和耐热性能，并研究了其溶胀性能。
In this thesis, the physical and heat-aging properties of short fiber-CR composite were mainly studied, and the swelling properties of the composite were also studied.
采用红外光谱、差热分析、物理力学试验等设备对乘用车助力转向油泵储液罐所选用原材料的结构、耐热性能和物理力学性能进行了表征及测试。
The test results showed that the base of the raw material of the booster steering oil pump stock tank of Fukang car of Shenlong Co.
对该复合材料进行了力学性能，热性能和熔体流动性的测试。
The composite material to the mechanical properties, thermal properties and melt flow of the test.
酚醛型氰酸酯树脂是耐烧蚀性能最好的树脂材料之一，它具有优异耐热性和介电性能，同时又具有一定力学性能。
Novolac cyanate ester resin is one of the high ablative-resisting polymer based materials. It also has superior heat-resistance, dielectric and mechanical properties.
AT使聚合物基体的力学性能、结晶学性能和耐热性能都有改善；但是不同体系的力学性能改善程度不同，AT可用作聚合物的有效的成核剂。
The inclusion of at into polymer matrix improved the mechanical properties, crystallization behavior, and heat resistance of the composites, however, the effectiveness varied upon different systems.
此外，这些杂化薄膜还具有良好的力学性能和热性能。
In addition, these hybrid films had good mechanical and thermal properties.
通过TEM、SEM、TGA和DMA等对其微观结构、热性能和动态力学性能等进行表征和分析。
The microstructure and properties are characterized by means of TEM, SEM, TGA and DMA.
结果表明：所得对苯型不饱和聚酯树脂具有较高的耐热性、优良的力学性能和耐化学腐蚀性能。
The results have shown that the product have good heat-resistant property, high mechanical property and chemical resistant property.
通过力学测试、DSC、DMA和SEM等分析，研究了聚乳酸和淀粉在不同质量配比下，复合材料力学性能、热性能、吸水率的变化，并研究了增容剂环氧树脂对复合材料性能的影响。
The changes of mechanical, thermal properties and water absorption of blends were analysed with mechanical test, DSC, DMA and SEM. The influence of epoxy resin in blends was also studied.
甲基丙烯酸十二氟庚酯的含量对乳胶膜的力学性能和耐热性能有着很大的影响。
The DMFA content had a significant impact on mechanical property and thermal stability of WPUA latex film.
用该树脂体系可湿法制作复合材料预浸布，其玻璃布复合材料在力学性能和耐湿热性能上可达到国外同类产品的水平。
With this resin curing system, a pre impregnating was obtained and the glass clothing composite had good mechanical properties and moisture resistance as the same product of abro…
分析了涂层对复合材料的界面性能、力学性能和耐热性能的影响。
The effects of coatings on the interfacial performance, mechanical property, thermal resistant property of composites were studied.
OREC添加量为2%（质量分数）时，剥离型纳米复合材料具有最佳力学性能和耐热性能。
The OREC/EP nanocomposite with 2% of OREC showed the increased mechanical and thermal properties, compared to the neat system.
我们研究和讨论了滑石粉含量对PP/EPDM体系的力学性能、热性能和微观结构的影响。
We study and discuss the effects of talc content on the mechanical, thermal, and microstructural properties of PP and rubber modified (EPDM) blends.
研究了聚醚型TPU和聚酯型TPU对TPEE力学性能、热性能、动态机械性能、流变行为及共混物相形态的影响。
The mechanical property, thermal behavior, dynamic mechanical property, dynamic rheological behavior and the phase morphology are studied when polyether TPU and polyester TPU are mixed in TPEE.
研究了经EP改性前后的OMMT及其用量对复合材料力学性能、耐热性能和结晶行为的影响。
The effect of adding OMMT and OMMT modified by EP on mechanical properties, heat resistant properties and crystal behaviors were investigated.
复合材料的力学性能和耐热性能测试结果表明，适量有机粘土的加入能使其拉伸强度和维卡软化点均较纯聚氯乙烯有较大提高。
The experimental results show that tensile strength is enhanced with the increasing adding of the appropriate organoclay. However, the mechanical property is damaged with the too high clay conte…
复合材料的力学性能和耐热性能测试结果表明，适量有机粘土的加入能使其拉伸强度和维卡软化点均较纯聚氯乙烯有较大提高。
The experimental results show that tensile strength is enhanced with the increasing adding of the appropriate organoclay. However, the mechanical property is damaged with the too high clay conte…
应用推荐