该高能半导体激光器的其他用途包括，用作各种材料处理应用的激光光源，这些处理应用包括覆层、焊接、热处理和铜焊接。
Other uses for this high power diode laser bar are as a direct source for various materials processing applications including cladding, welding, heat treating and brazing.
有些热损伤相当严重，以至于临近区域材料的热处理状态被改变。
Some heat damage is so severe that the heat-treat condition of material is altered in adjacent areas.
分配材料和热处理的新产品组件的要求。
V. Assign material and heat treat requirements for new product components.
本文结合内耗机理及部分实践提出了钢弹性体材料处理、热处理工艺对传感器滞后误差的影响分析。
This text analysed the influence of steel elastomer material, heat treatment craft to load cell lag error combining internal friction mechanism and practical experience.
应均匀地对整体材料进行热处理，而不可以仅针对材料的一部分。
Heat treatment shall be carried out uniformly over the whole material and never on a part of the material only.
钢的焊接CCT图，是正确选择焊接材料、确定最佳焊接工艺、消除焊接裂纹、制订焊后热处理规范的重要依据。
Welding CCT diagrams of steels are the basic to select welding material, determine the optimum welding technology, relieve welding cracks and lay down standard of past heat treatment.
图纸内容还应包括材料部件编号，间隙公差，表面机械加工符号，热处理信息，表面保护，材料重量，以及其他的必要内容。
Drawings will also include the material part Numbers, tolerances clearances, surface machining symbols, heat treatment information, surface protection, material weight and other necessary information.
磨削强化技术是利用磨削加工过程中产生的大量磨削热对工件材料进行表面热处理的新工艺技术。
The grinding strengthen technology is a new process engineering of surface heat-treatment, which uses a mass of grind heat produced in grinding process to handle workpiece materials.
材料的热成型或冷成型的选择由卖方进行，但成型后热处理应符合相关材料规范的要求。
Selection of hot or cold forming of materials may be made by Vendor, but heat treatment after forming shall conform to the requirements of applicable material specifications.
或者提供热处理表，或者提供经认证的时间和温度数据总结。该数据作为认证材料试验报告的一部分。
Either heat treatment charts or certified summaries of time and temperature data may be provided. This data may be included as part of the CMTR.
标示试件位置的图纸应呈递所有人批准。测试证明应说明材料的特定属性及所要进行的热处理。
Drawings shall be submitted to the Owner for approval showing the location of test pieces. Test certificates shall state the specified properties of the material and heat treatment given.
作为墙体中的新型保温材料，具有优良的保温性能，能够对墙面进行隔热处理，保证室内最适宜的温度。
As a new type of thermal insulation material in the wall, it has excellent thermal insulation performance, can heat insulation on the wall, to ensure the most appropriate indoor temperature.
这样就实现了基于计算机数值模拟的虚拟材料固态加工及热处理过程。
Then the virtual solid state material processing and heat treatment processes can been realized based on computer simulation.
介绍了机加工时的工艺参数、热处理方法和材料质量检测方法。
Besides, their technological parameters, methods of heat treatment and material tests are also presented.
通过不同的热处理方式可获取相应的材料使用性能。
The corresponding material performance can be achieved through different heat treatment methods.
热处理后，材料的硬度和强度均有提高，但冲击韧度下降。
Through heat treatment, material hardness and strength increase, but impact toughness decreases.
试样应当横向取，如果必要，尺寸可以低于标准要求。试样应当从与发运材料一同热处理的圆盘中取样。
The specimen shall be transverse, using dimensions less than standard if necessary, and shall be prepared from a wafer heat treated with the material to be delivered.
介绍了ARY合金材料的试验方法、热处理工艺和机械性能。
The test method, heat treatment process and mechanical properties of ARY alloy material are in traduced.
概述材料热处理技术和原理的进展。
Progress in technology and theory of materials heat treatment is generally introduced.
概述热处理原理(主要为相变)的进展对材料生产的重要作用。
The role of progress in heat treatment principles, mainly the phase transformations in materials technology is briefly introduced.
下表列出了丝杠部件的材料构成和热处理工艺。
The following table shows the material composition and heat treating details of a ball screw system.
通过采用新的装置及材料，降低了燃料消耗，提高了热处理质量，改善了生产环境。
Using new equipment and material, they reduces the fuel consume, raises the heat treatment quality and improves the production environment.
真空热处理是金属材料热处理领域的新技术。
Vacuum heat treatment is the new technique in the heat treatment of metallic material.
在齿轮的制造过程中，合理选择材料与热处理工艺，是提高承载能力和延长使用寿命的必要保证。
In the making of gears, reasonably selecting materials and heat treatment is the necessary guarantee of improving bearing capacity and prolonging service life.
共轭凸轮制造工艺分析，包括凸轮加工中存在的问题，材料选用、热处理、数控铣削加工、数控磨削、检测等。
Matched CAM manufacturing technology, such as material, heat treatment, numerical control milling and grinding, problems in the process of manufacture, inspect and etc, are analyzed.
通过对油锯链进行大量的热处理试验研究和性能检测，确定出最佳的材料，热处理工艺和设备。
Based on a great deal of heat treatment experiments of oil chain saw, the author obtains the optimum material, heat treatment cycle and equipment for the oil chain saw.
介绍了星轮制造中的新材料选用、热处理和加工过程的新工艺。
The paper discusses the new materials, heat treatment and processing method for manufacturing star wheel.
该热处理工艺使材料在韧性和硬度方面达到了较好的综合性能应用范围。
Through the procedures, the toughness and hardness of the material have got a better synthetical applying field.
本文对影响齿轮热处理畸变的材料、锻造、预备热处理等因素进行了研究。
In this paper, the effect factors on heat treatment distortion, such as material, forging and preheat treatment etc. have been studied.
在工业领域中，热处理工艺作为提高材料性能的重要手段和重要的基础工艺，得到了广泛的应用。
The heat treatment process is an important method and fundamental procedure, widely used in the industrial field for the purpose of enhancing the material properties.
应用推荐