以锅炉热力计算为基础，开发锅炉运行优化软件。
On the basis of the boiler's thermodynamic calculation, the software of boiler's operation optimization is developed.
建立了吸附式太阳能制冷装置的吸附床热力计算模型。
Thermodynamic calculating model of adsorption bed in the adsorption solar refrigeration equipment was established.
将C语言应用到冷却塔计算中，使冷却塔热力计算简化；
The incorporation of C language in the cooling tower calculation can simplify the thermal calculation.
热力计算主要是核算越站后各站的进站油温是否高于原油的凝点；
Thermal calculation made is mainly to assess whether the inlet oil temperature at each station after non-heating operation is higher than crude oil's pour point;
本文对扩散——吸收式制冷系统的工作机理及热力计算进行了探讨。
This paper discusses the working mechanism and thermal calculation of the diffusion absorption refrigeration system.
本文根据锅炉运行经验和热力计算理论，分析查找排烟温度高的原因。
According to the thermodynamic calculation theory and practical operating experience, this thesis analyzed and searched for the reasons of high Exit gas temperature.
通过热力学分析获得了发动机性能的理论解，并利用热力计算进行验证。
The theory solution was acquired by thermal analysis and was identified by thermal calculation.
回热系统是火电厂热力系统的重要组成部分，也是进行热力计算的重点。
Regenerating system is the main component of thermal dynamic system for the power plant and affects thermal calculation.
在对热力系统建模并进行热力计算时，需要对模型中的设备和管道编号。
For modeling and thermal calculating of the thermal system, it is necessary to numbering related equipment and pipelines in the model.
本文以理论分析以及强化传热元件的结构优化、热力计算为主要研究内容。
Theoretical analysis, optimum structure of enhanced heat transfer components and thermal calculation are the main parts in this paper.
在船用汽轮机热力计算的变工况计算中，经常出现超临界工况及超流工况。
In the variable conditions calculation of thermodynamic calculation for Marine steam turbine, it is often for overcritical conditions and overflow conditions to occur.
本文阐述了锅炉用热设备节能的意义，并通过某实例进行了热力计算和分析。
The significance of energy saving for boiler heat user is described in this paper, the thermal calculation and analysis for an example are also emphasized.
最后以锅炉热力计算设计过程为例，验证模型对实际产品动态过程的可管理性。
At last, the applicability of the model to an actual product dynamic management is confirmed with the example of a boiler thermodynamic calculation design process.
最后，通过采用数值迭代算法，实现锅炉热力计算程序的全流程自动迭代计算。
At last, by the use of numerical iterative algorithm, the automatic iterative process of boiler's thermodynamic calculation is achieved.
将该模块用于常规g - M制冷机的热力计算，结果合理，达到了预期的要求。
By using this module in the thermodynamic calculation for G-M refrigerator, the results are reasonable and meet the expectative requirements.
采用VB语言，通过动态链接库的调用，编制了低参数单缸汽轮机热力计算程序。
By adopting VB language and using a dynamic-link data base, designed was a thermodynamic calculation program for low-parameter single-cylinder steam turbines.
最后通过对热力系统进行建模和热力计算的实例，验证了该方法的可行性及准确性。
Finally, the feasibility and correctness of this strategy is verified with the practical example of modeling and thermal calculations for the system.
进而介绍了利用这两个方程在电子计算机上进行溴化锂吸收式制冷循环热力计算的方法。
The method for using the two equations to calculate the thermodynamic characteristics of an LiBr absorption refrigeration cycle is introduced.
并根据电厂实际情况，经热力计算、阻力计算、强度计算、钢结构计算确定了具体改造方法。
Following a thermodynamic, flow and strength calculation of the boiler, as well as that of the steel structure, a concrete retrofit plan has been drawn up that fits actual conditions of the plant.
本文对一开始就冷凝的叉流式空气-空气湿热交换器提出一种新的热力计算法，即对比模型法。
The new method of thermodynamic calculation (the contrast model method) for air-air crossflow wet heat exchanger with wet air condensing first at the entry is proposed in this paper.
本文系统地介绍了油库输油管线热力计算软件的数据库创建过程，并提供了一种好的数据库方法。
The paper systematically introduces the process of creating database of oil depot pipeline thermal calculation software, thus provides a good database method.
为了提高锅炉热力计算模型的通用性和系统的可维护性，提出面向对象应用框架的系统建模方法。
For improving the versatility and extensibility of the boiler thermodynamic calculation system, a modelling method with object-oriented application frameworks was presented.
由于涡轮增压机组在不同负荷下的热力计算不同而造成增压锅炉在不同负荷下的热平衡计算的不同；
The heat calculation would be different because of dissimilar thermal calculation in the turbo-compressor when the boiler load was changed.
文章在建立了热力系统加热器的通用性数学模型的基础上，用循环函数法对整个回热系统进行热力计算。
This article derives a general model of heater for thermal dynamic system. Based on the general model, the thermal parameters of regenerating system can be calculated by Circulating Function Method.
完成了不锈钢螺纹管凝汽器的工程热力计算、变工况核算、冷却水流动阻力、蒸汽流动阻力和漏气量计算。
The engineering thermal calculation, the calculations of different operating conditions, of the resistance of water flow and vapor flow, and of the air leak amount were made.
本文以冷却塔综合性能最优为目标，结合逆流式泠却塔的热力计算特性，对逆流塔的热力性能进行优化设计。
In this paper, count flow cooling tower was optimally designed and its synthetically property was used as the object function.
经济器是舰用增压锅炉的重要组成部分，经济器的结构和热力计算是我国舰用增压锅炉国产化的关键技术之一。
The economizer is an important part of supercharged boilers and utilizes the structure and thermal calculation method as a key technique.
利用热力计算得到了绝热燃烧温度与氧化剂流率和药柱长度的变化规律，绝热燃烧温度随氧化剂流率的增加存在一最大值。
Adiabatic combustion temperature at various oxidizer mass flow rates and grain length is obtained by thermodynamic calculation and has a maximum as oxidizer mass flow rate increases.
利用热力计算得到了绝热燃烧温度与氧化剂流率和药柱长度的变化规律，绝热燃烧温度随氧化剂流率的增加存在一最大值。
Adiabatic combustion temperature at various oxidizer mass flow rates and grain length is obtained by thermodynamic calculation and has a maximum as oxidizer mass flow rate increases.
应用推荐