研究了生产烧结金属过滤器的原料粉末的性能特征。
The characteristics of metal powder for producing the sintered metallic filter was studied.
介绍了使用烧结金属过滤介质的过滤技术的进展情况。
The developing situations of filtration technology utilizing sintered metal media was introduced.
综述了选择性激光烧结金属粉末材料和纳米粉末材料的研究进展。
Research progresses of metallic powder materials and nano powder materials fabricated by selective laser sintering (SLS) were reviewed in brief.
烧结金属筒实测结果显示,吹风径向不匀率小于10%,且气流稳定。
The experiment result of the sintered metal tube shows that the uneven rate of axial blowing is lower than 10%, and the flow is steady.
首先,通过对4种类型6种材料试验比较,最后确定以烧结金属多孔材料制作整流筒。
Firstly, the sintered metal porous material is determined be used for rectifying tube after the experiment comparison of 4 types and 6 kinds of porous materials.
通过实验对多孔烧结金属网过滤器的高温过滤特性和反洗清灰效果进行了系统的研究。
The filtering properties and the back-flushing effect of the sintered metal-mesh filter were studied systematically through laboratory tests.
建立了烧结金属多孔材料连通孔隙形成的模型,通过控制机械压制压力获得了一定孔隙率的金属多孔材料。
Geometrical models are built for connected pores of the sintered porous metal. The mechanical compaction force is controlled to obtain the porous metal with the certain porosity.
达克罗的应用范围很广,它不但可以处理钢、铁、铝及其合金,还可以处理烧结金属,以及特殊的表面处理。
Dacromet has a wide range of applications. it not only can be used to treat steel, iron, aluminum and its alloys, but also can handle sintered metal, and the special surface treatment.
从烧结金属多孔材料本身结构性能特点出发,探讨了烧结金属多孔滤材的应用特点以及该滤材目前国内外技术发展趋势。
The character of sinter metal porous materials was studied, the metal filter element market of China and some new developments of sinter metal technology was introduced.
用背散射电子像、钴磁仪、矫顽磁力计、化学分析等手段研究了真空烧结金属陶瓷合金的成分、晶格常数与其钴磁及矫顽磁力的关系。
Using back scattered electrons, co - % magnetism meter, coercive force meter and chemical analysis etc, the compositions, co - % magnetism and coercive force of vacuum sintering cermets are studied.
EOS是一家德国的激光烧结3d印制机生产商。该公司称其产品已经被汽车制造者,航空企业和生产消费产品的公司用来制造塑料和金属部件。
EOS, a German supplier of laser-sintering 3d printers, says they are already being used to make plastic and metal production parts by carmakers, aerospace firms and consumer-products companies.
粉末冶金(图5.1)采用烧结工艺将金属粉末制成各种各样的零件。金属粉末放在封闭的金属腔(模具)中在压力下被压实。
Powder metallurgy (Fig. 5.1) USES sintering process for making various parts out of metal powder. The metal powder is compacted by placing in a closed metal cavity (the die) under pressure.
被压实的材料置于炉内烧结,在高温下炉内环境可控,金属粉末熔合形成固体。
This compacted material is placed in an oven and sintered in a controlled atmosphere at high temperatures and the metal powders coalesce and form a solid.
主要研究了通过选择性激光烧结高分子原型件制造金属零件的工艺。
A process that metallic parts are fabricated through selective laser sintering (SLS) prototype parts is researched.
采用特定的方法对金属烧结多孔材料进行表面改性和催化剂复合,开发出一种新型的催化蒸馏构件。
A new type of catalytic distillation column has been developed by means of surface modification and catalyst combination to sintered metal porous materials.
熔体过滤器采用不锈钢金属纤维烧结毡为过滤介质,是一种具有无数不规则孔隙通道和一定厚度的载体。
Fusion filters adopt the stainless steel metallic fibre sintered fibre felt as filtered medium. lt is a carrier with a great amount of irregular pores and certain thickness.
本文提出的金属粉末致密化工艺与传统的压实烧结致密;冷热等静压致密:粉末模锻的致密化工艺不同。
The densification process of metal powder presented here is different from those of powder forging, cold or hot isostatic pressing, and traditional compacting sintering.
对所研制的焊丝匹配烧结焊剂进行了熔敷金属的埋弧焊试验。
Submerged arc welding with the test welding wire matching sintered flux was carried out to get the deposited metal.
本文提出了用阳极氧化法测定阀金属烧结多孔体的表面积。
The present paper Outlines that the surface area of sintered porous metal for valve can be measured by anodic oxidation.
这种表面金属化的金刚石颗粒具有一般金属颗粒的可烧结性、可焊接性及表面可导电(可电镀)性。
The diamond particles with metallized surface have much the same sinterability, weldability and electrical conductibility (for electroplating)as common metal particles.
采用直接金属激光烧结的方法,对316不锈钢粉末进行了一系列激光烧结实验。
A series of experiments were carried out on Direct Metal Laser Sintering (DMLS) of 316 stainless steel powder.
分析了烧结机头尾密封四连杆密封装置存在的缺陷,介绍了全金属柔磁密封的结构和特点。
The paper analyzes the faults of four-link sealing device and introduces the structure and characteristics of all-metal flexible magnetic sealing.
硅灰石作为碱土金属硅酸盐,在普通陶瓷坯体中起助熔的作用,降低坯体的烧结温度。
The wollastonite as the alkali earth metal silicate, helps the melt in the ordinary ceramic body the function, reduces the body the agglutination temperature.
指出了选择性激光烧结技术成型金属零件所存在的一些问题和选择性烧结技术的发展前景。
Some existing problems of forming metal parts by selective laser sintering technology were pointed out. The development prospect of the technology was summarized.
同样,悬臂式檐金属包钢结构和烧结多孔玻璃汇合而成的波浪也呈现着层层流动要素。
Similarly the cantilevered canopies of metal clad steel structure and fritted pattern glass merge the wave forms into a series of repeating flowing elements.
介绍了多孔泡沫金属材料常用的传统制备方法(铸造法、发泡法、烧结法和沉积法)及具体应用。
This paper reviews the conventional preparation techniques that include casting, forming, sintering and deposition and practical application for every technique of foam metal.
最后给出了激光烧结上述金属粉末制造齿轮的加工实例,其致密度达理论密度的82%,而横向尺寸误差仅为1.9%。
A case study on SLS of this Cu-based metal powder to fabricate a gear is carried out. 82% relative theoretical density and transverse dimension error of 1.9% are achieved.
最后给出了激光烧结上述金属粉末制造齿轮的加工实例,其致密度达理论密度的82%,而横向尺寸误差仅为1.9%。
A case study on SLS of this Cu-based metal powder to fabricate a gear is carried out. 82% relative theoretical density and transverse dimension error of 1.9% are achieved.
应用推荐