基于唐钢原料条件，进行了司家营精粉烧结特性的试验研究。
Based on Tangsteel's raw material, sintering characteristic of Sijiaying iron ore are studied through sintering experiments.
提出了用粉末冶金法制备铜锰固溶体的方法，研究了铜锰粉末压坯的烧结特性。
A method for making monophasic solid solution of copper and manganese by powder metallurgy process is presented. The sintering characters of green compact of copper and manganese powder are studied.
采用高温显微镜、同步热分析、热膨胀实验等方法，系统的研究了亚微细硬质合金的烧结特性。
In this thesis, some test methods, such as Heating Microscope, DTA-TG, Thermal Dialation Testing, were used to research the sintering properties of cemented carbide in submicron grain, systematically.
由于超细钼粉低温活化烧结特性，在烧结过程中降低烧结温度，减少烧结时间，有效地提高钼板坯的晶粒数，同时降低了车间的生产成本。
The lower sintering temperatures and shorter sintering time are used in the sintering process for fine molybdenum powder sintering characteristics of low-temperature activation.
本文介绍了黄河淤泥沙的基本特性，并在此基础上，比较详细地阐述了利用黄河泥沙生产烧结多孔砖的工艺过程。
The paper introduce the base properties of the silt, and disucss the processing of multi-hollow brick used the silt from Huanghe River.
硬度是衡量超硬材料烧结体的主要特性之一。
Hardness is one of the main characters of ultrahard material sinters.
本文以高碱度烧结矿中的铁酸盐黏结相为研究对象，考察了黏结相的熔化特性随黏结相组成的变化规律。
This paper studied the melting characteristics of binding phase in high-basicity sinter and got the relationship between the melting temperature and binding phases composition.
在华中科技大学快速制造中心孙海宵硕士的研究基础上，进一步研究了聚苯乙烯(PS)的材料特性对烧结件质量的影响。
Based on the research of master Sun at Rapid Manufacturing centre of HUST, the effect of polystyrene (PS) properties on the quality of the sintered parts is further researched.
通过实验对多孔烧结金属网过滤器的高温过滤特性和反洗清灰效果进行了系统的研究。
The filtering properties and the back-flushing effect of the sintered metal-mesh filter were studied systematically through laboratory tests.
细述了钢渣的理化特性，并介绍钢渣在筑路、烧结矿、水泥、建材和农业等领域的综合利用。
The comprehensive utilization of steelmaking slag in all the fields was introduced such as road construction, sinter, cement, building material and agriculture.
结论采用粉末烧结技术研制的多孔板的特性满足水升华器的性能要求。
Conclusion Porous plates developed by making use of sintered powder technology could meet requirements of performance of water sublimator.
煤灰的烧结和熔融是电站锅炉灰沉积的重要过程，熔体的结构特性是沉积物生长和强度形成的决定性因素。
Sintering and melting of coal ash is a key process of ash deposition in furnace of utility boilers. Melt structure characteristics is a determining factor in deposit growth and strength development.
针对实验室用大功率CO2激光的光束特性和烧结陶瓷实验时对光斑的特定要求，本研究从理论设计了一套激光均束装置。
According to beam properties of the CO2 laser in the laboratory and light spot requirement for laser sintering, a set of laser beam homogenizing equipment is designed in this thesis.
铁矿石的铁酸钙生成特性是烧结配矿必须考虑的因素，对优化配矿具有重要的指导作用。
The CF producing characteristics of iron ore is an important factor for sintering mixture and it has a directing action for optimizing mixture.
为了解铜氧化物高温超导体的正常态输运特性对其超导电性的影响，我们对不同温度烧结样品正常态电阻率和超导电性之关联进行了系统的研究。
In order to know the influence of the superconductivity by normal properties of the cuprate superconductor, the relationship between the normal resistivity and the superconductivity was studied.
在系统分析阐述循环流化床锅炉脱硫灰渣特性的基础上，探讨了各种综合利用方式，并推荐以烧结为主的脱硫灰渣利用方法。
Various comprehensive utilization routes are discussed based on the characters of the desulfurization ash derived from circulating fluidized bed boiler.
针对烧结法的强碱性赤泥堆场的特性，找出一种可行的施工方法，对边坡进行复垦植被。
This research is to aim at the characteristic of red alkaline mud dump site of the sintering process, and to find a feasible method for ecological rehabilitation on the slope.
本文在分析了微波烧结温度工作过程的特性和系统的特殊之处后，提出了计算机两级控制系统的结构对微波烧结温度进行了有效的控制。
After analyzing the feature of microwave sintering and the specialty of this system, we propose the computer two-stage structure to realize the reliable control of microwave sintering temperature.
本文介绍了自主研制的具有可控气孔的低熔高强纳米陶瓷结合剂的烧结工艺和气孔结构特性。
This paper introduced a low melting point high strength nano vitrified bond with controllable pores developed by the authors, in respects of the sintering process and its pore structures.
本文主要介绍了多层片式电感用低温烧结六角晶系铁氧体的晶体结构、制备工艺及电磁特性。
The crystal-structure, fabricating process and electronic-magnetic properties of the low-temperature-sintered hexagonal ferrites applied in Multilayer Chip Inductor(MLCI) are introduced in this paper.
根据埋弧焊烧结焊剂中各组分的作用，利用“配方均匀设计”，提出一组配方；通过测试各个配方的熔化特性，选择其中处于合理范围的配方。
According to the action of the component in sintered flux, a group formulations were put forward by using "the uniform design of the formulation".
纳米陶瓷材料具有许多优异的功能和特性，但在烧结过程中纳米颗粒容易长大，从而失去纳米特性。
Nano-phase materials have many unique characters from ultra-fine grains. However, nano-grains grows larger in sintering in order that nano-characters will be lost.
纳米陶瓷材料具有许多优异的功能和特性，但在烧结过程中纳米颗粒容易长大，从而失去纳米特性。
Nano-phase materials have many unique characters from ultra-fine grains. However, nano-grains grows larger in sintering in order that nano-characters will be lost.
应用推荐