适用各钢铁厂烧结机或焙烧机台车上。
Therefore, the utility model is suitable for trolleys of sintering machines or burning machine in steel plant.
烧结机炉篦条的主要失效形式是烧蚀和折断。
The main failure forms of grate bars used in sintering machines are ablation and fracture.
环式烧结机炉箅条主要失效形式是烧蚀和折断。
The main failure forms of fire bars in cycle type sintering machine are burning erosion and fracture.
降低烧结机漏风率是提高烧结机产能的重要因素。
Reducing the air leak rate is one of the most major methods to raise production capacity of sintering machine.
烧结机的无纸化设计将大大减轻设计工作者的工作量。
Sintering Machine design paperless design will greatly reduce the workload of workers.
烧结机漏风问题直接影响烧结过程的各项技术经济指标。
The air leakage on sintering machine affects the technological and economical indexes of sintering process.
烧结机新型布料系统由宽皮带给料机和九辊布料器组成。
The new type strand feeding system includes the wide feeding strap and the nine roller feeder.
带式烧结机在生产过程中，经常发生台车运行跑偏的故障。
In the production process, takes place frequently the malfunction of trolley runing-departure for draper-type agglomeration engine.
介绍韶关冶炼厂烧结机烧结料层透气性的情况以及改造途径。
This paper describes the permeability of the sinter layers and proposes methods of improving it at Shaoguan Smelter.
介绍了平面循环烧结机余热利用装置的特点、原理和运行情况。
The paper introduced the characteristics, principles and running situations of equipment of the plane circulation sintering machine waster heat utilization.
该预制块应用在烧结机点火器上，使用寿命可达2 ~3年。
The service life of the preformed block applied in igniters of sintering machine is 2 ~ 3 years.
钢铁研究总院于1979年建成投产国内第一台电火花烧结机。
Central Iron and Steel Research Institute (CISRI) built the first electric spark sintering machine in China in 1979 and put it into production.
介绍了邢钢烧结厂为提高烧结机的利用系数所进行的技术改造。
The technical modifications for increasing sintering machine productivity conducted in Xingang sintering plant were presented in this paper.
研究结果可以为今后带式烧结机的工程设计和应用提供理论依据。
The research results can provide the theoretical basis for the engineering design and application of sinter chain in future.
工业用带式烧结机的星轮和台车的传动为齿轮一销齿条啮合传动。
In an industrial sinter chain, the drive type of the spider and pallet cars is gear and pin rack transmission.
环式烧结机点火炉密封挡板存在着材质及形状设计不合理等问题。
There exist deficiencies in the material and shape designing of the seal baffle for ignition furnace of circular traveling gate machine.
铬锰氮钢铸件，是冶金企业生产烧结矿用烧结机中的易损重要备件。
CrMnN steel casting is the key for sintering machine to produce sintering mine in metallurgy enterprises.
通过对测试结果的分析，全面了解本烧结机的质量和能量收支水平。
With analysis of measured data, income and expense of mass and energy in sintering machine have been acquired comprehensively, and energy utilization has been studied.
介绍了湘锰烧结厂提高烧结机利用系数的具体作法，并从理论上进行了分析。
In this paper, the measurements adopted for increasing Xianmeng sinter machine productivity were presented, and the theoretical analysis was conducted.
烧结机尾部的单辊热破碎机齿冠使用寿命过短，是钢铁行业的一大技术难题。
The shorter service life of single roller crushers installed on the end of sinter machine is a difficult technology problem to the steel-iron industry.
提高烧结混合料透气性，对提高烧结机利用系数、降低烧结能耗有着重要的作用。
Increasing the ventilation of sintering mixture is very important for increasing the sinter productivity, decreasing sinter energy consumption.
阐述了加压烧结的理论基础，介绍了加压烧结在宝钢3号烧结机应用的工艺及其效果。
The theoretical basis of the compression sintering is explained, and the technological schemes and the results of compression sintering at Baosteel no. 3 sintering machine are introduced as well.
通过一系列技术措施的实施，烧结机利用系数得以提高，为高炉增铁节焦创造了条件。
As the implementation of these technical measurements, the productivity of sinter machine was increased, and was helpful for increasing BF output and energy saving.
为了降低烧结机机头机尾的漏风率，设计了软体密封，在烧结杯中进行试验，效果显著。
In order to reduce sinter machine the nose airplane tail air leak rate, designed the software seal, in agglutinated in the cup carries on the experiment, the effect was remarkable.
介绍烧结机的配料系统采用PLC加上位管理机来改造原有手工操作，收到了较好的效果。
The burden system of sintering machine and the retrofit of using PLC and host computer to replace the manual operation are described. The retrofit obtained good result.
介绍了它的工作原理、主要特点、环式烧结机与带式烧结机的比较及在生产中的实际应用。
Its principle, characteristics, the difference between the circular sintering machine and the band sintering machine and the application in the production are mainly introduced.
对烧结机机尾电除尘器在使用过程中经常出现的几种故障进行分析，并提出相应的解决方法。
Several failures using ESP at the sintering machine tail are analysed, and the corresponding ways are put forward.
介绍在烧结机环冷余热回收工艺中应用小型DCS、PLC与变频调速器所构成的控制系统。
The control system for heat-recovery process from circulating cooling of sintering machine is introduced. In this system small- sized DCS, PLC and variable frequency speed adjuster are composed.
针对太钢烧结机配料电子皮带秤存在的问题，介绍了一种新型的技术方案，并叙述了实施效果。
Aimed at the existing problem in electronic belt scale for sintering machine of TISCO., the author introduces a late - model technique and describes practical effect.
介绍了近几年韶关冶炼厂烧结机的生产情况，分析了提高铅锌烧结机生产效率的途径，并提出了建议。
The producing practice of sintering machine in recent years in Shaoguan Smelter is introduced, and the methods improving the sintering machine's efficiency are put forward.
应用推荐