随后烧制未烧结制品以便通过烧 结它的飞灰基体而硬化成型制品。
The green article is subsequently fired so that the shaped article is hardened by sintering its fly ash matrix.
以酒精力混合介质，烧结镁砂为原料获得致密的陶瓷烧结制品是可行的。
The dense ceramic products can be obtained using sintered magnesite as raw materials and alcohol as mixing medium.
认为石墨筒内的温度场分布主要取决于发热体、烧结制品和石墨舟皿的布置位置以及气体的流动方式。
The results showed that the distribution of temperature field is mainly affected by the gas flow path and the distributions of heating source, sintered products, and graphite boards.
因此，利用锯末具有高发热量与烧失量的特点，将锯末作为造孔剂制备轻质高强高孔洞率的烧结制品。
Therefore, sawdust, as a pore-forming agent, can prepare sintered product with light weight, high strength and high porosity due to calorific value and loss of sawdust.
烧结致密法是制取高性能粉末冶金工具钢制品的一个途径。
Sintering densification process is one way to manufacture P/M for producing tool steel products with high properties.
本文简述烧结高速钢制品的基本生产工艺及其性能。
The present paper has briefly described the basical technologies of sintered high speed steel products and their properties.
这表明，可以通过烧结工艺改变陶瓷制品中的晶相，从而获得性能优良的陶瓷材料。
It shows that ceramic material with good performance can be obtained by sintered technique to change crystal phase in ceramics product.
对铁基制品采用分解氨作烧结气氛时的脱碳原因进行了分析，探讨了几种控制脱碳的方法及途径。
The causes of decarburization in the sintering of ferrous products using dissociated ammonia as atmosphere are analysed and some methods and routes to control decarburization are discussed.
粉煤灰的颗粒组成、粒度分布是影响高掺量粉煤灰烧结空心制品坯料成型工艺的重要参数。
Fly ash grain composition, particle size distribution are the important process parameters that effect the molding of body stock of high content fly ash sintered porous product.
技术支撑：大异制品的成形、烧结技术与设备，显微结构控制技术。
Technical support: technologies and equipment for pressing, sintering of large products, technologies for controlling of microstructures.
反应烧结成本相对低一点，但制品中总有残余硅存在，使得制品的质量不高。
Cost of reaction sintering is relatively low, but there is always residual silicon in products, lowering the products quality.
产品烧结程度好，结晶致密，是生产中档镁质耐火制品的优质原料。
Featured by good sintering level and dense structure, it is an excellent material for making middle-grade magnesia refractory products.
本文介绍了磨料磨具行业中，金刚石制品烧结压机所应用的几种加热方式，并对每种方式进行了分析和综述。
Some communly used heating ways of sintering machine for making diamond products are presented in the paper. Analysis and discussion are made on each of the heating ways.
根据烧结法生产建筑装饰微晶玻璃的特点，对制品码放方式及喷枪布置形式提出要求。
According to the feature of sintered decorative glass-ceramic, the requirements for the product stacking and the burner arrangement were put forward.
本发明提供一种形成具有含烧结飞灰的基体的成型制品的方法。
The present invention provides a method of forming a shaped article having a matrix that contains sintered fly ash.
HJA - 7和HJA - 8具有较高的烧结密度，地收缩率，适用于生产高档耐火材料，耐温、耐磨刚玉制品。
HJA-7 and HJA-8 has a high sintered density, contraction rate, for the production of high-grade refractory materials, temperature, wear-resistant corundum products.
该设备广泛在冶金、建材、机械、化工等行业作加热炉之用，特别适用于耐火材料行业耐火制品在各种气氛下的重烧线变化的测试及烧结。
The machine is widely used for heating in metallurgy, building material, mechanical, chemical and so on. It's especially applied to test linear changes of refractory products in every kind atmosphere.
以电熔二钙砂、方镁石一氧化锆共晶材料为原料，制备出了再结合镁锆砖，并对制品的烧结性能进行了研究。
It produces rebonded magnizium-zirconium bricks which is made up of fused magnesite and fused eutectic MgO-Z_rO_2 materials. Then it analyzed the properties of samples after sintering.
用两个温度下煅烧后的蓝晶石为原料，研制烧结蓝晶石制品，对其烧成温度、高温性能、抗热稳定和显微结构作了研究。
Kyanite calcined at two temperatures is used as raw material to prepare calcined kyanite. Their firing temperature, high temperature properties, thermal shock and microstructure have been studied.
用两个温度下煅烧后的蓝晶石为原料，研制烧结蓝晶石制品，对其烧成温度、高温性能、抗热稳定和显微结构作了研究。
Kyanite calcined at two temperatures is used as raw material to prepare calcined kyanite. Their firing temperature, high temperature properties, thermal shock and microstructure have been studied.
应用推荐