研究了碳、硅和铝合金元素对水雾化奥氏体不锈钢粉末烧结时的表面反应的影响。
This paper analyzes the influences of carbon, silicon and aluminium on the surface reaction when sintering austenite stainless steel powder.
熔体过滤器采用不锈钢金属纤维烧结毡为过滤介质，是一种具有无数不规则孔隙通道和一定厚度的载体。
Fusion filters adopt the stainless steel metallic fibre sintered fibre felt as filtered medium. lt is a carrier with a great amount of irregular pores and certain thickness.
介质浆料的烧结致密化程度对不锈钢基板的绝缘性能具有至关重要的影响。
The sintering densification of dielectric paste had crucial effect on the insulation of stainless steel substrate.
研究了水雾化奥氏体不锈钢粉末在烧结时的表面反应。
The surface reaction of water atomized austenitic stainless steel powder during sintering has been studied.
研究了粉末烧结双相不锈钢及其时效后的相结构和强韧性。
The phase structure and high toughness of powder sintered biphase stainless steel and after its ageing have been studied.
采用直接金属激光烧结的方法，对316不锈钢粉末进行了一系列激光烧结实验。
A series of experiments were carried out on Direct Metal Laser Sintering (DMLS) of 316 stainless steel powder.
综述了添加元素对奥氏体不锈钢粉末压坯液相烧结行为及材料性能的影响。
The paper summarizes the effect of additives on the liquid phase sintering behaviour of the compact of austenitic stainless steel powder and the properties of resultant material.
其核心过滤元件为滤筒，它由多层不锈钢金属网烧结而成。
Filter cylinders, the core parts of the device, are made of the multi-layer stainless steel wire.
用途：适用于汽车零部件、粉末冶金、不锈钢零件等的钎焊、烧结、固溶热处理工艺。
Applications: Used for the brazing, sintering and solution heat-treatment of automobile parts, stainless steel parts and powder metallurgical product.
研究了碳、硅和铝合金元素对水雾化奥氏体不锈钢粉末烧结时的表面反应的影响。
Influences of carbon, silicon and aluminium on the surface reaction of austenite stainless steel powder during sintering have been studied.
在YA-100型四柱液压拉深机上，进行了用反应烧结氮化硅材料凹模拉深不锈钢（SUS304）的试验研究。
The drawing tests of stainless steel (SUS304) with reaction bonded Si 3N 4 ceramics die lubricated with water base lubricant were carried out using a four columns YA 100 type drawing machine.
研究了烧结制度对具有三维通孔网状结构泡沫不锈钢的线收缩率、开孔孔隙度、抗弯强度的影响。
The effects of sintering schedule on the shrinkage, open porosity and bending strength of the stainless steel foam with 3-D opened network structure were investigated in this paper.
研究了烧结制度对具有三维通孔网状结构泡沫不锈钢的线收缩率、开孔孔隙度、抗弯强度的影响。
The effects of sintering schedule on the performance of stainless steel foam with 3-D open-celled network structure;
利用该曲线计算出了纳米不锈钢粉末烧结试样的平均晶粒度。
The mean grain size of stainless steel sintered from nano-sized powder was measured using these calibration curves.
用途：适用于汽车零部件、粉末冶金、不锈钢零件等的钎焊、烧结、固溶热处理工艺。
Applications: Used for the brazing, sintering and solution heat-treatment of automobile parts, stainless steel parts and powder metallurgical products.
该产品是以不锈钢为基体，中间烧结多孔青铜层，在表面轧制以PTFE为主的混合物，可在中酸、强酸中使用。
The product is based on stainless steel plate with sintering porous bronze layer and rolled PTFE compound 0n the surface. It can be used in strong acid and alkaline.
采用直接金属激光烧结的方法，对316不锈钢粉末进行了一系列烧结实验。
A series of experiments were carried out with direct metal laser sintering (DMLS) for the 316 stainless steel powders.
较详细地论述了不锈钢粉末冶金过滤器的制造工艺及原始粉末形状、粒度、压制压力和烧结温度对过滤性能的影响。
The manufacture technology of sintered steel filter and influence of primary particle shape and size, pressing pressure and sintering temperature on filtering performance are discussed.
试验结果表明：温压工艺能够较大幅度地提高316L不锈钢粉末的生坯密度和生坯强度，也能提高其烧结后的密度和抗拉强度。
Results show that warm compaction can improve the green density and strength of 316L powder greatly and improve its sintered density and tensile strength as well.
采用机械混合法，经过在机烧结，获得型芯，并用型芯浇铸了不锈钢件。
After mechanical molding and sintering, the cores are gained and stainless steel parts are made with the cores.
滤芯过滤材料分别采用无机纤维、木棉定型滤纸、不锈钢烧结毡、不锈钢编织网。
Filter element adopts many kinds of materials, such as inorganic fiber, cellulose fiber, stainless steel sinter fiber web, stainless steel wire woven.
滤芯过滤材料分别采用复合纤维、木棉定型滤纸、不锈钢烧结毡、不锈钢编织网。
Filter element adopts kinds of materials, such as inorganic fiber, resin-impregnated paper, stainless steel sinter fiber web, stainless steel wire mesh.
滤芯过滤材料分别采用复合纤维、木棉定型滤纸、不锈钢烧结毡、不锈钢编织网。
Filter medium adopts kinds of materials, such as inorganic fiber, cellulose fiber, resin-impregnated paper, stainless steel sinter fiber web, stainless steel wire mesh.
指出了利用粉末冶金制备高氮不锈钢所具有的技术优势，其中注射成形——氮化烧结工艺更具发展潜力。
The producing and shaping technology of high nitrogen stainless steels power were reviewed. The power metallurgy technology for producing high nitrogen stainless steel has some advantages, esp…
滤芯过滤材料分别采用复合纤维、木棉定型滤纸、不锈钢烧结毡、不锈钢编织网。
Filter medium adopts kinds of materials, such as inorganic fiber, cellulose fiber, resin-impregnated paper, Filter vessel is die-cast in aluminum alloy.
滤芯过滤材料分别采用复合纤维、木棉定型滤纸、不锈钢烧结毡、不锈钢编织网。
Filter medium adopts kinds of materials, such as inorganic fiber, cellulose fiber, resin-impregnated paper, Filter vessel is die-cast in aluminum alloy.
应用推荐