因此使用正确标准的铺炉和烘炉工艺能够提高炉子的使用寿命。
Therefore, using the correct standard laying furnace and ovens process can improve the service life of the furnace.
它有多种不同做法，可放在炉子里加热、蒸、烤、油炸、用微波炉或者面包机加热、或在炉子里烘烤。
The versatile tortilla can be warmed in the oven, steamed, grilled, Fried, heated in a microwave or toaster or baked in the oven.
加氢反应炉空气预热系统改用热管预热器后，炉子热效率提高了约3%。
After the air preheater system of hydrogenated reaction furnace changes into heat tube preheater, the heat efficiency of furnace increases about 3%.
本文介绍了流态粒子炉用于金属线材热处理时的工艺特点和技术难点，强调了炉子关键部位设计时应注意的问题。
The article states the technical features and barriers of the fluidized bed furnace when used for treating metal wires, and points out the design matters of the furnace key parts.
介绍了大功率喷流感应炉的工作原理，炉子主要结构及其技术特征。
The paper introduces the technological characteristic, working principles of W-type giant power electromagnetic induction furnace and the furnace structure.
电弧炉用来生产特殊钢比用任何其他炉子都好，因为它不需要燃料。
The electric arc furnace is better for the production of special steels than any other types of furnace, since it needs no fuel.
从炉子的设计角度提出了解决炉内流动场、温度分布不均匀的方案。
The methods to solve the problems were given from the angle of the furnace design.
在分析了炉子电热特性的基础上建立了石墨化炉传热数学模型。
Based on the analysis of thermal, electric and physical characters of graphitization furnaces, a mathematical model of heat transfer in the furnace was proposed.
这是一台微波炉，这是一个炉子。
密封箱式炉热处理零件的质量控制是一个系统工程，包括炉子结构、炉子控制系统、热处理工艺以及操作，其中一个环节出问题都将影响热处理零件质量。
The quality control of parts heat treated in the sealed box furnace is a system engineering, including design, control system of the furnace and heat treatment process as well as operating.
但在我们说了几句好话之后，他同意让一些参观者进厂看两眼。走近冶炼炉时，他把手伸近炉子。
But after a little cajoling, he allowed some visitors in for a quick look around and approaching the furnace, he put his hands up close.
微波后容器很热，不要给宝宝。容器不要使用在传统的炉子或炉头。喂食之前测试温度。
Container may be hot after microwaving. Never give a hot container to a child. Do not use in conventional oven or stove top. Always test food temperature before serving.
工业炉窑烟气余热回收利用，是提高炉子热效率、节约炉用燃料的极为有效的途径。
Recycle and utilization of waste heat in exhaust fume of industrial furnaces is the efficient way enhancing furnace heat efficiency and saving fuel used by furnace.
首要，炉子在开始送电操作时，炉底电极电阻低、导电性良好，用不着任何预热，也不必发动电极就可以发动。
First, the electricity at the beginning of the operation, the bottom electrode of low resistance, good electrical conductivity, without any preheating, nor will launch electrode can launch.
工业炉炉管管排的角系数在炉子设计中是一个很重要的量。
The Angle factor for radiation to a tube bank is an important quantity in the industrial furnace design.
还原炉是卧式布置。炉子加热启动快，热惯性小，保温效果好，热效率高。
The furnace is horizontal, which is characterized by fast starting, low heat inertia, good isolation and high heating efficiency.
试验表明，三电极直流钢包炉技术可解决底电极式直流钢包炉存在的不足，使炉子加热速度快和不发生偏弧现象。
The results show that threeelectrode DC ladle furnace, increasing heating speed and without arc bias, can overcome the shortcomings of bottom-electrode DC ladle furnace.
不能在水中，蒸发器，微波炉或者炉子上加热。
Do not heat in water, a vaporizer, a microwave oven, or on the stove.
文章对不锈钢加热炉的综合技术指标实现及加热炉生产运行、炉子热平衡结果进行了分析评述。
The fulfillment of the heating furnace's integrated technical indicators, the operation of the heating furnace and the heat balance results of the stainless steel furnace are also analyzed.
炉缸在炉子的最下部，呈圆柱形。
冰箱是全新的，炉子和微波炉才用了不到一年。
The refrigerator is new, and the stove and the microwave oven are less than a year old.
因为炉子的能力不允许相同的炉号在不同的炉子进行热处理。
It is not allowed to perform heat treatment for same heat no in the different furnace because of furnace capacity.
步行到地铁和广场，步行到比利主教机场，不锈钢冰箱，炉子，洗碗机，微波炉，白色洗衣机和烘干机。
Walk to Metro And Plaza, Walk to Billy Bishop Airport, Stainless Fridge, Stove, Dishwasher, Microwave, White washer And Dryer.
文章对不锈钢加热炉的综合技术指标实现及加热炉生产运行、炉子热平衡结果进行了分析评述。
The fulfillment of the heating furnace's integrated technical indicators, the operation of the heating furnace and the heat balance results o...
文章对不锈钢加热炉的综合技术指标实现及加热炉生产运行、炉子热平衡结果进行了分析评述。
The fulfillment of the heating furnace's integrated technical indicators, the operation of the heating furnace and the heat balance results of the stainless steel furnace...
新炉或长时间没有使用的炉子，在使用之前必须烘炉，烘炉时尽可能用旧元件或其它热源。
Before the new furnace of the furnace that has not been used for a long time is used, they must be dryinged. When drying them, it is better to use old elements or other heat source.
新炉或长时间没有使用的炉子，在使用之前必须烘炉，烘炉时尽可能用旧元件或其它热源。
Before the new furnace of the furnace that has not been used for a long time is used, they must be dryinged. When drying them, it is better to use old elements or other heat source.
应用推荐