这是该炉的基础。该洞是一个排水孔的泄漏或破损的情况下/通过坩埚烧毁。件的销子***成两半，将留下一个战壕中的难治性导致洞。
These trenches will allow spilled metal to access the hole rather than being blocked when a "plinth" block or piece of brick is set on the base to hold the crucible.
在此基础上进行了电弧炉电极调节自适应控制系统的设计，推导出了递推的离散时间模型参考自适应律。
Based on this the design of arc furnace electrode regulator adaptive control system is made, the rule of discrete-time model reference adaptive control is proven.
针对大坝电厂300MW机组，本文在网路分析法的基础上，建立了炉内辐射传热分区仿真模型。
For the. 300mw electric generating unit at Daba Power Station the division zone model for the simulation of the radiative heat transfer is set up on the basis of network analytic method.
LF炉成分的精确控制是生产优质钢种的基础。
The LF ladle furnaces ingredient accuracy control is the production high quality aluminum foundation.
本文以现场实际经验为基础，着重介绍了炉卷中厚板轧机支承辊的常见故障诊断、维护以及检测等技术。
The failure diagnosis, maintenance and detection of steckel mill BUR are introduced based on practice in the paper.
配合炉监，以确保混合的程序和数额成分的基础上的公式都严格遵守。
Coordinate with Furnace Supervisor to ensure that the mixing procedure and the amount of ingredients based on formula are strictly followed.
燃烧控制是实现均热炉群优化控制的基础，而燃烧控制的核心是空燃比控制。
The basis for realizing the optimizing control of soaking pits is combustion control, the key in which is to control the ratio of air to fuel.
本文在分析了影响工业燃油炉燃烧效率因素的基础上，提出了一种基于火焰彩色图像像素分类的表征燃烧状况的指标评价函数。
This paper presents a combustion evaluation function based on flame color image classification after analysing the influential factors on the burning efficiency of industrial oil furnace.
在进行热力学和动力学分析的基础上，阐述了在冲天炉中熔炼铁精矿粉的可能性。
On the basis of thermodynamics and dynamics, the possibility of the melting of iron ore concentrates in the cupola is discussed.
在分析铜冶金炉热修补工艺过程的基础上，设计了机器人的机械系统。
Based on the analysis of the hot patching craft for copper smelting furnace, gives the design of mechanism.
在分析烧结机台车炉篦条失效原因的基础上，进行了提高它们使用寿命的材质研究。
On the basis of analyse of the invalidation cause of bar grate, the material research to increase the durability had been carried through.
然后，在工艺过程分析基础上设计了低压真空烧结炉自动控制工艺流程。
Then, at the base of analysis of the technics process, designed the autocontrol technics flow chart of HIP-Sinter stove.
在对目前有心感应电炉设计方法分析研究的基础上，介绍了一个用于有心感应炉的高效、可靠、准确的设计程序。
On the study of present design method of channel induction furnaces, the paper introduces an efficient, reliable and accurate programme for designing channel induction furnaces.
本文在详细分析蓄热式燃烧技术的基础上，利用高温气化炉产生的煤气，对蓄热式高温炉进行了设计。
Based on the detail about the Characteristics of regenerative combustion, by the coal of the high temperature gasifying furnace, the regenerative reheating furnace is designed.
并以辊底式热处理炉数学模型为基础，实现了辊底式热处理炉的计算机优化控制。
Moreover on the basis of mathematical model of roller hearth furnace, achieves computer optimal controlling of roller hearth heat - treating furnace.
本文是在试验研究的基础上介绍了双层炉排锅炉的水冷炉排弯曲原因及其避免方法、水冷炉排循环回路的水动力特性及其设计时应注意的问题；
The paper discovers the causes for the bending of water cooled grate of a double grate furnace based on the experimental results and solutions to this problem are also given.
在对目前国内外真空加热炉存存的问题进行深入研究的基础上作了若干改进，设计出新型的真空加热炉。
Based on a study of the existing problems found in the vacuum glow-ovens now used in TL laboratories, the author has developed a new system with some improvements.
文章在分析水夹套式氯化氢合成炉腐蚀机理基础上提出防腐壁温约束条件的合成炉换热面积设计方法。
This paper provides synthesizer's heat exchanger area design method of additive mothballing wall temperature bondage condition in analysed corrosion mechanism of hydrogen chloride synthesizer.
在大量试验的基础上，整定出两条锌点炉炉温程序控制设定温度曲线。
Based on lots of experiments, two temperature curves of Zinc freezing point stove with program control are established.
本文结合结构控制的思想，对火筒式加热炉进行基础隔震的地震响应控制的研究。
Combine structure control theory do the research on earthquake responses control for a drum type heating furnace.
本文在分析电子束炉真空度不稳定原因的基础上，阐述了新的真空系统控制方案及其算法。
The project and arithmetic how to control the vacuum degree are introduced by the analysis of the reason why the vacuum degree is unstable.
以某钢厂推钢式连续加热炉为背景，建立了加热炉的动态数学模型，并在此基础上解决了加热炉最小能耗优化控制问题。
This paper establishes a continuous dynamic mathematic model of reheating furnace and based on which, resolves the problem of minimum consumption control of the furnace.
在炉内传热机理研究的基础上，结合实际生产过程中的热电偶实验，建立了钢管光亮退火炉热处理过程数学模型。
In this paper, a mathematical model of heat transfer in tube annealing furnace, in which some parameters are confirmed through the embedded thermocouple experiments is presented.
在此基础上，对钢水炉外化学升温精炼与常规精炼的冶金效果及对钢水质量的影响进行了对比分析。
The metallurgical effects and the effect on quality of the steel were compared between refining with chemical heating and that without heating.
以文献为基础，简要介绍了文献中的流化床气化炉的数学模型，将其分为热力学平衡模型和速率模型；
Mathematical models reported in the literatures are introduced briefly in this paper, and can be breadly classified into thermodynamic and rate models.
在提出电弧炉能量过程控制概念的基础上，论述了其控制过程的三个子系统控制：饱和电抗器控制、喷氧和后燃烧控制、能源需求控制。
On the concept of energy process control in EAF, three subsidiary control system, which are saturation reactor control, oxygen jet control and energy demanding control, are introduced.
在大量试验的基础上，整定出两条锡点炉炉温程序控制设定温度曲线。
Based on the experiments, two temperature setting curves of tin freezing point stove are established.
在大量试验的基础上，整定出两条锡点炉炉温程序控制设定温度曲线。
Based on the experiments, two temperature setting curves of tin freezing point stove are established.
应用推荐