最后对未来的电火花控制系统进行了展望。
The future advanced EDM control technologies are proposed in the end.
它具有可手控的永久磁性基座、独特的刀具结构、有效的火花控制和极大的便携性，适用于特殊环境下的钻孔作业。
It has permanent magnet base, unique cutter structure, effective spark control and portability. It suited to special environment to drill.
这方面的资料证准确，专业诊断的火花塞，电线插头，点火系统，燃油控制和大多数其他的影响因素火花塞电压和燃烧室。
This information permits accurate, professional diagnosis of the spark plugs, plug wires, ignition system, fuel control and most other factors affecting the spark plug voltage and combustion chamber.
放电单脉冲能量的精确控制是实现微细电火花加工的关键技术之一。
The accurate control of single pulse discharge energy is one of key techniques in micro-EDM.
本文介绍了高压静电收尘器火花频度计算机控制系统的硬件组成和软件设计。
The paper introduces the hard ware composition and soft ware design of computer control system of spark frequency of high pressure static dust extractor.
本文论述了宽调速比直流电动机无火花换向区曲线分散的基本原因，并给出工程控制措施。
The paper introduces the basic cause of the sparkless space dispersion for DC motor with the wide adjustable speed ratio, and gives the control methods of projects.
电火花脉冲电源由单片机控制，用于产生高压放电脉冲、低压放电脉冲、间隙状态检测等功能。
Pulse power generator, controlled by an embedded MCU, can produce high voltage or low voltage discharge pulse waveform.
计算机控制电火花加工法制作的修复体适合性好，就位率高。
Metal prosthesis with computer-controlled electric spark method with good qualities of both fit and insertion rate.
本文介绍了电火花微孔加工的原理和过程，分析了其控制系统的硬件和软件功能，并提出了今后需改善的地方。
This article introduces principle and process of electric sparking micro-hole working, analyses hardware and software function of this control system, and presents the aspects which need improving.
在从铜丝跳跃到工件上的过程中，火花腐蚀出一条清晰的路径，这可以通过NC来密切控制。
In jumping from the wire to the workpiece, the sparks erode away a clear defined path, which can be very closely controlled with NC.
本文介绍了电火花线切割机床的微机控制系统的设计与实现；
This article introduces the design and realization of the control system for electrical spark linear incising machine tool.
与现有技术相比，本发明使燃料电池测试用负载大小可自由控制，无短路故障，无火花，安全可靠。
Compared with the prior art, the method can automatically control the size of load for the fuel cell test, has no fault of short circuit and no spark, and is safe and reliable.
文章介绍了用于电火花线切割机床连续轨迹式数字程序控制的射流装置。
In this paper a fluidics device of continuous-path numerical control system for electrical spark machine tool is presented.
它可把火花放电频率控制在允许范围内。
It may limit the amount of sparkover to an acceptable rate .
控制系统部分包括步进电机控制电路和脉冲电源电路，这是数控电火花加工机床的重点设计部分，也是难点。
The controlling system part contains the circuit of step-by-step electromotor control and the circuit of pulse electrical source.
设计了一个用于在微细电火花加工控制中放电参数检测的高速数据采集系统，对其硬件电路进行了分析和讨论，并给出了软件说明。
A high speed data acquisition system for measurement of Micro EDM discharge parameter is designed. The hardware circuits are analyzed and discussed, also the software function is present.
为实现电火花电极的微米级步距，设计了椭圆微驱动电路，并能有效地控制电极的运动方向。
The electrode is driven by Elliptical Movement and its direction is controlled by two voltage phase difference.
在此基础上，采用控制周期总体间隙状况和局部短路的伺服控制策略，建立了基于模糊控制技术的回转式电火花展成加工伺服进给控制系统。
And adopting the method in which including periodical detecting and local detecting of gap discharge state, the servo feed control-system based on fuzzy control technology was designed.
利用火花源发射光谱仪测定钢中的氧方法快速、准确，能够应用于生产工艺过程的在线控制。
The method to use spark emission spectrograph is fast, accurate, and can be used for on-line control of production.
在输入方式、控制系统及数据共享、资源共享等方面对SCK电火花线切割机床进行了重大改造。
We have made a major reformation on SCK electric spark linear cutting machine in terms of control system, data sharing, resource sharing etc in the input mode.
公司现有进口铣床、车床、火花机、CNC机、全电脑控制全机械手操作的注塑机等设备。
Nowadays, our company has the state-of -art imported milling machines, lathes, EDM and CNC machines. All these machines are computer-controlled by injecting whole molding machine.
提出了电火花加工脉冲电源逆变式结构的一种控制策略，阐明了其实现方法和控制原理。
A method for controlling an inverting EDM pulse generator was introduced and illustrated the designing way and controlling principle.
并应用平衡态的概念和稳定性定理，从理论上阐述和分析了电火花加工伺服进给闭环模糊控制系统的稳定性。
The stability of servo, move forward and close-loop fuzzy control system for electric spark processing was analysed theoretically with the concept of equ...
为了提高电火花加工自动化和智能化程度，更方便地实现电火花加工脉冲电源的实时控制，在现有的脉冲电源基础上开发了一种基于IS A总线的电火花脉冲电源。
To improve the automatization of WEDM (Wire Cut Electric Discharge Machining) and to real-time control WEDM pulse power supply, a WEDM pulse power supply based on ISA bus is put forward.
讨论单点燃油喷射式火花点火发动机的非线性动态模型，该模型可用于控制算法的火花点火式发动机开发研究。
This paper discusses a nonlinear dynamic model of a single point fuel-injected engine, which can be used for control-ling algorithm development in a spark ignition engine.
在电火花加工中，间隙放电状态是伺服控制的依据，因此间隙放电状态的检测非常重要。
Spark states of the gap are the base of servo control in EDM, so it is very important to test them.
该技术方案以小型电火花机床的主轴头和电源控制柜为基础，重点研究了总体结构、电极与工件之间的三坐标移动、电极精确定位、工作液循环系统等关键技术。
The key technologies, the whole makeup, the motion between electrode and workpiece at three coordinates, precise orientation of electrode and cycle system of work liquid are emphatically studied.
针对电火花加工的特点，提出了利用计算机控制电火花加工电源的策略。
According to the characteristics of EDM, this paper presents a strategy of using computer to control the power source of EDM.
针对电火花加工的特点，提出了利用计算机控制电火花加工电源的策略。
According to the characteristics of EDM, this paper presents a strategy of using computer to control the power source of EDM.
应用推荐