针对焊接药剂的特点,并结合焊条的具体结构,采用专用火焰点火器点燃焊条的设计方案,并对点火器进行了详细设计。
Considering the characteristic of thermite and the concrete structure of the welding rod, the design scheme of special-purpose flame igniter is adopted, and the igniter is designed in detail.
灼烧一个敌人,对其造成11563到13437点火焰伤害,30码距离。1秒施法。
Scorches an enemy for 11563 to 13437 Fire damage. 30 yds. 1 SEC cast.
造成7000到9000点火焰伤害,无限距离。
研究了超声速预混可燃气流的温度以及当量比对超声速燃烧流场结构、点火与火焰传播特性的影响。
The effects of temperature and equivalence ratio of supersonic premixed combustible flow on the structure of supersonic combustion flow field, ignition and flame propagation were studied.
采用小尺度箱体及液化石油气模拟室内燃气泄漏的条件,通过电火花点火,实验研究了在燃气泄漏过程中的着火与火焰蔓延的现象与规律。
Using little scale trunk and LPG to simulate the condition of indoor flammable gas leakage, an experimental study was performed on the fire and flame spread ignited by electric sparkle.
这些特征都有利于点火,火焰稳定及强化燃烧。
These flow characteristics can be favorable to ignition, flame stabilization and combustion intensification.
首先,着火后火焰是沿着点火前的可燃区域迅速蔓延的。
The first, after ignited, the flame spreaded along the flammable zone before igniting.
研制成合适的自动点火装置和火焰监测器,保证了安全生产。
A new automatic igniter and flame detector have been developed to insure the production salty.
其次,火焰的形状和火焰的颜色是由点火位置附近的浓度梯度决定的。
The second, the flame shape and color were determined by the concentration gradient of the place near the igniting position.
针对高原地区低温、缺氧、气压低的客观现实,通过对轻油燃烧器结构的改进,解决了燃烧器点火困难、火焰不稳定及燃烧不完全问题;
Aiming at the facts of low temperature, rare oxygen and low-pressure, ameliorates phenomena of burner igniting difficulty , unsteady flame and incomplete burning by improving on burner's parts.
为了实现快速短距起爆,火焰射流点火系统被尝试应用在脉冲爆震火箭发动机上。
In order to achieve a rapid initiation of detonation in a short distance, a flame jet ignition system was applied to the pulse detonation rocket engine (PDRE).
在被击中时对攻击者造成75点火焰伤害,使你的法术爆击几率提高3%,并使你受到爆击的几率降低5%。
Causes 75 Fire damage when hit, increases your chance to critically hit with spells by 3%, and reduces the chance you are critically hit by 5%.
因此,与金属稳定器相比,陶瓷蒸发腔稳定器具有火焰稳定范围宽,再点火性能好及能减弱或消除振荡燃烧等特点。
Consequently, the ceramic flame stabilizer has advantages over metallic ones in enlarging the range of flame stabilization, enhancing reignitability, weakening oscillating combustion and etc.
熔铸装甲—等级1要求62级消耗法力630瞬发法术当被击中时对目标造成60到90的点火焰伤害并且降低你被物理和法术伤害致命一击的几率10%。
Molten Armor - Rank 1 Requires Level 62 630 Mana Instant cast Causes 60 to 90 Fire damage when hit and reduces the chance you are critically hit by melee attacks and spells by 10%.
自动点火,风机助燃,升温快,温度高,火焰大小可自动调整。
Automatic ignition and combustion, fan, high temperature, warming faster size can automatically adjust the flame.
根据发生炉煤气的特性,采用强制预混燃烧方式,设计了点火器的喷嘴、引射器及烧嘴,并对稳定火焰的方法也进行了研究。
This paper explained the design of nozzles, injectors and burner cones of new ignition with producer gas on forced pre-mixing and the method of flame stability.
实验测得了爆炸危险度、火焰蔓延极限、最小点火能等特性参数;
The minimum ignition energy, the maximum experimental safe gaps, the degree of explosion danger and other explosion characteristics were experimentally determined.
利用半高度后掠支板和氢气引导火焰相结合的点火方式,也可以实现煤油的可靠点火和稳定燃烧。
Combination use of the oblique Shockwave induced by the leading edge of the half height strut and hydrogen pilot flame can also ignite the kerosene and hold the combustion stably.
点火能量越大,火焰传播速度也越大;
The higher ignition energy was and the higher flame travel speed would be.
在管道长径比一定时,瓦斯爆炸火焰传播速度与点火能量呈二次函数关系。
When the pipeline length and diameter ratio was certain, the flame travel speed of gas explosion and ignition energy would be in a quadratic function relationship.
基于火焰传播过程建立了火花点火发动机顶环岸间隙处未燃碳氢生成和释放过程的数学模型,并利用模型进行了顶环岸间隙处未燃碳氢生成过程的数值模拟计算。
In this paper, based on flame propagation a mathematical model of formation and desorption of unburned hydrocarbon in top-land crevice of spark ignition engines has been established.
利用激波预热燃料并采用高温燃气流作为引导火焰可以将碳氢燃料的点火延迟缩短,火焰传播速度加快,有效解决了碳氢燃料点火延迟过长的问题。
The problem of longer ignition delay for hydrocarbon fuel can be effectively solved by means of preheating fuel by shock waves and using hot gas as pilot.
固体火箭发动机的点火是一个十分复杂的物理化学过程,包括三个阶段:点火延迟、火焰传播和燃烧室气体充填。
The ignition of the solid rocket motor (SRM) is a very complex physical and chemistry process, which is composed of three component phases: ignition delay, flame spreading and chamber filling.
本文通过研究过量空气系数对炉内火焰的影响规律,指出在煤粉无油点火初期不宜补充大量二次风。
Through experiments of excess air coefficient on the PC combustion in stove, it is concluded that it is no use to add too much air at the beginning of free-oil ignition of PC.
介绍了一种用于汽油机点火正时闭环控制的火焰信号角测量系统,并在BJ 492 Q型汽油机上作了实例试验分析。
A flaming Angle measuring system for closed-loop ignition timing control of petrol engines is outlined in this paper, and an experimental example on a BJ492Q petrol engine is provided.
试图通过试验,研究从林火点火源的红外辐射谱特性确定火焰性质的方法。
Provide some significant experimental results for determining some properties of igniting fire sources in wildland fire from their infrared radiation characteristic spectrum.
如果点火器的布置位置及启动时间均合理,有可能在不引起大范围火焰加速或爆炸的情况下迅速有效地消除氢气。
It is possible to reduce much hydrogen without causing deflagration or detonation in large area if the location and starting time of the ignitor are reasonable.
火焰探测器用于监测燃气火焰、黄色或蓝色燃油燃烧火焰以及点火火花的校对。
The flame detectors are used for the supervision of gas flames, yellow- or blue-burning oil flames and for ignition spark proving.
此模型能根据实测的燃烧压力曲线计算出层流燃烧速度、已燃气火焰温度及火焰传播速度等参数随压力、当量比、发动机转速、点火提前角的变化规律。
The variation of combustion velocity, fired gas temperature and flame propagation speed, when the press, excess air ratio and ignition timing changed, was calculated by this quasi-dimensional model.
此模型能根据实测的燃烧压力曲线计算出层流燃烧速度、已燃气火焰温度及火焰传播速度等参数随压力、当量比、发动机转速、点火提前角的变化规律。
The variation of combustion velocity, fired gas temperature and flame propagation speed, when the press, excess air ratio and ignition timing changed, was calculated by this quasi-dimensional model.
应用推荐