研制了一套弧焊机器人激光检测系统。
A set of laser detection system in welding robot is developed in this paper.
本文密切结合实际科研课题，针对激光检测系统中的关键技术及其应用进行了研究和开发。
Derived from the practical situation, the thesis makes a thorough study on the key technologies and the applied developments of the Laser Detection System.
基于激光扫描检测原理，提出了一种用于测量较大直径的双光束激光扫描尺寸测量系统。
Based on the laser-scanned inspecting principle, a double beams laser-scanned measuring system for size is presented, which is used to measure a diameter.
本文针对高质量板材对接填丝激光焊的需要，设计了对缝间隙宽度检测的传感器与送丝控制系统。
To guarantee good quality of butt laser welding with filler wire, a gap width detecting sensor and a wire feeding system has been designed.
本文介绍了压电薄膜检测的激光超声系统对CVD金刚石膜声速测量的原理及方法。
The principle and method of measuring the acoustic speed CVD diamond film with piezoelectric film detecting laser ultrasonic system are presented.
介绍了利用安装于三坐标测量机CMM上的激光测头测量自由曲面的立体视觉检测系统。
A stereovision inspection system for measuring free-form surface is introduced which consists of coordinate measuring machines (CMM) and a laser probe.
在第二章中，采用激光诱导荧光检测芯片毛细管电泳系统进行蛋白质和多肽分离的研究。
In the second section, a chip based ce system with laser induced fluorescence detector was developed to achieve the separation of protein and polypeptide.
介绍了近红外激光光谱无创血糖检测系统的原理与结构。
The principle and structure of the near-IR laser spectrum noninvasive blood glucose detection system are introduced in the paper.
以激光光斑中心定位算法作为研究对象，编写了将检测系统采集到的光斑图像自动转化成光斑位置数据的程序。
To laser spot center positioning algorithm as object of study, compiled the procedure of spot diagram collected images with detecting system automatically change into spot position data.
同轴度自动检测系统根据激光位移传感器扫描频率，在圆周面上选择72个采样点。
The 72 sampling points on the circumference of a spare part was set by the automatic detecting system of coaxial degree according to the scanning frequency of the laser sensor.
采用实时成像系统，对复杂结构钛合金激光焊件进行了检测，得到了含有微小缺陷的激光焊件射线图像。
Laser welding seams in titanium alloys with complex structure were detected by using real time imaging system in this paper, and the images of ray detection which contain tiny flaws were obtained.
本文围绕激光调阻机的检测与控制系统进行了以下几方面的研究和设计工作。
In this dissertation, several studies and designs are made concentrating on the measurement and control system of Laser Resistor Trimming Machine.
本文讨论金属丝网激光在线检测仪系统。
检测微弱的激光超声，要求系统具有较高的灵敏度。
Laser ultrasonic signal is so weak that it can be detected only by high sensitivity system.
文中介绍了光电二维自动检测仪的测量原理和系统构成，包括激光扫描系统、光栅位移检测闭环控制系统。
The paper has introduced the theory of measurement and whole constitute of the system including laser scan inspection system and grating displacement closed loop inspection system.
介绍一个高精度的激光光纤传感式精密加工表面粗糙度在线检测系统。
An on line high precision system with laser and optical fiber sensors for measuring the surface roughness in precision machining is reported.
在激光扫描检测技术中，被测件边缘信号的检测精度将直接影响到系统测量的精度。
The system precision is directly affected by the sample edge measurement precision in laser scanning measuring technology.
在精密光电检测和光纤通信系统中激激光电源的功率稳定最为重要。
The stable laser in power source is applied widely in precise light electricityexamine and light electricity corresponding.
热释电探测器为交变信号检测器件，根据这一原理，研制了一种新的激光训练系统，完全解决直射光的问题。
Pyroelectric detectors depend upon alternating signal, based on which a new kind of laser training system was developed, and the problem of direct light was solved.
作为光通讯以及光电取样检测系统的主要光源，增益开关半导体激光器产生的激光脉冲质量受到了极大的关注。
As the major source of optical communication and optic-electric sampling detection, the quality of optical pulse generated by Gain-switched semiconductor laser gets more and more attention.
为实现对磁性零件的在线计数检测，开发了一种在线式磁性零件激光光电计数仪系统。
To accomplish on-line count inspection for magnetic parts, a kind of laser photoelectric counter system is developed based on photoelectric inspection theory.
介绍了基于激光位移传感器与电涡流位移传感器的位移差动法在线检测纸坯厚度的原理及测量系统的软硬件设计。
The principle of paper thickness on-line measurement using displacement differential method based on laser displacement sensor and electric eddy current displacement sensor is introduced.
在比较了以往采用的接触网导线高度检测技术后，开发出基于激光相位测距原理的接触网导线高度检测系统。
After having compared with common-used technique in contact wire height measurement, this paper describes a laser phase-detecting method to measure the height of contact wire.
基于强激光系统光学元件损伤的在线暗场成像检测，提出了一种无损、自动、快速检测的新算法。
A new algorithm of nondestructive, automatic and high-speed inspection is proposed for dark-field image to be used to inspect online optic component damage on high power laser system.
研制的“37火控系统基础练习检测器”具有模拟激光测距，检测跟踪测速是否准确，实施二次瞄准等一系列适应新式火控系统训练需要的功能。
Type 37 fire control system training detector possesses such functions as simulating laser range finding, detecting if tracing and speed - measuring is accurate and conducting second aim.
边缘检测是激光雷达图像处理的重要组成部分，其性能直接影响整个雷达系统的精度和性能。
Edge detection plays an important role in lidar image procession. Its capability has direct influence on precision and performance of lidar imaging system.
基于激光扫描检测技术，现采用激光球面反射扫描原理，提出了一种曲臂两臂轴径的激光非接触检测方法和测量系统。
Based on laser-scanning measuring technology, a laser non-contact measuring method of arm diameter for crankshaft and a measuring system by using the laser scanning principle are presented.
介绍了一种基于结构光条法原理，运用CCD摄像机、线激光光源和计算机图像采集系统与软件等，研制出机车车辆轮对外形磨耗自动检测系统。
The system is on the basis of principle of the structural light strip method, with the application of CCD pickup camera, linear laser light source, the computer image collecting and the software, etc.
提出差压法和激光密封检测系统适用于汽车工业作多种零件的密封检测。
It is showed that the differential pressure method and laser detecting system of seal are suitable for the detecting of many automotive parts.
测试系统充分发挥了激光光纤传感测量方法的突出优点，实现对精密产品的非接触、快速地检测。
By making full use of the outstanding merits of the laser optical fiber sensing technology, a non contact, high speed inspection for the precision products is realized.
应用推荐