对高压放电泵浦的准分子激光放电回路进行了探讨。
The discharge circuit of excimer laser by high voltage discharge pumping was studied theoretically.
设计了一种新颖的金属筒式加热器，使气体激光放电管轴向温度分布均匀。
A novel heater with a metal pipe was designed which is used encircling the discharge tube of a CuBr laser, resulting in homogeneous distribution of axial temperature.
本文讨论了大口径铜蒸汽激光放电的纵向阻抗，给出了阻抗的解析表达式，具体计算了大口径铜蒸汽激光的放电感和电容。
The optimum input power density is presented by analyzing and calculating the discharge tube gas temperature of a 100 W copper vapor laser to avoid the "black center of beam".
文中描述了准分子激光器中的电磁干扰的来源和干扰途径，并详细从激光放电回路、激光腔和软硬件设计角度讨论了抑制电磁干扰和提高系统可靠性的方法。
The methods in which suppress the EMI and improve systems security in terms of discharge circuit, laser cavity, hard - software designs were discussed.
文中描述了准分子激光器中的电磁干扰的来源和干扰途径，并详细从激光放电回路、激光腔和软硬件设计角度讨论了抑制电磁干扰和提高系统可靠性的方法。
The sources of EMI were described. The methods in which suppress the EMI and improve system's security in terms of discharge circuit, laser cavity, hard- software designs were discussed.
实验表明，这种微波放电装置是产生长程均匀放电激光等离子体柱的一种有效方法。
The experiment results show that this microwave discharge design is adequate to excite long uniform plasma column for gas lasers.
数值求解了电路中各电容器和激光管的放电电压和电流脉冲波形，得到了与实测波形一致的模拟结果。
Numerical solutions of discharge voltage and current pulses on each capacitors and laser tube in the circuit are in good agreement with the experimental ones.
本文给出了共振激光作用下的汤生放电理论。
The theory of Townsend discharge under resonant laser action is presented.
建立了一个理论模型描述了高重复率脉冲放电金属蒸气激光中的电泳动力学过程。
A theoretic model has been established to describe the cataphoresis dynamics in high repetition rate pulsed discharge metal vapor lasers.
考察了激光取样、辅助火花放电电压、电极尖端距离等条件变化时对分析结果的影响。
The influence of laser sampling, auxiliary spark discharge voltage, and electrode point gap on analytical results was examined.
“发射”气体激光（也就是反转能产生光放大的那些状态的粒子数）的最普通方法是运用气体放电。
The most common method to "pump" a gas laser--that is, to invert the population in the states that give rise to light amplification--is to use a gas discharge .
对国际上普遍采用的两种EUV光源：放电等离子体源(DPP)和激光等离子体源(LPP)进行了多方面比较。
The general EUV sources, discharge produced plasma (DPP) and laser produced plasma (LPP), were compared in many respects.
用同轴式放电对离子激光的某些特性作了研究。
The characteristics of the laser output were investigated in the case of coaxial discharge.
通过研究铜空心阴极激光器阈值特性、气体混合比和放电温度对激光输出功率的影响，给出了一些新的结果。
Some new results are given through investigation on threshold feature of the laser, effect of gas mixture ratio and discharge temperature on the laser output power etc.
激光器放电结构及谐振腔的设计；
建立了一个反映纵向脉冲放电激励铜蒸气激光动力学过程的自洽物理模型并进行了数值求解。
A self_consistent physical model describing the kinetic process of the longitudinal pulsed discharge_excited copper vapor laser was established, and numerical solutions of the model were obtained.
给出了铜蒸气激光器放电电路各参数的表达式及取值。
The expressions or values of discharge circle parameters for copper vapor laser are presented.
文中介绍了由直流高压电路、脉冲放电电路和一级脉冲磁压缩电路组成的铜蒸气激光器电源。
The supply power of copper vapor laser (CVL) consisting of DC high voltage circuit, pulse discharge circuit and one stage magnetic pulse compression circuit is introduced here.
我们研制了一台结构简单的纵向放电加热的铜激光器。
A pure copper laser of simple structure with longitudinal discharge is reported.
以DF为例，在一台单放电管电激励红外多波段激光器上测试了两种稀释剂注入方式下激光器的输出特性。
Output characteristics were tested under two diluent injecting methods on a single tube discharge excited infrared multi-band chemical laser by taking DF as a typical case.
本文讨论了在电子束控制放电激光器中，由于传输线与放电阻抗失配所引起的放电特性的变化。
This paper discusses the change of discharge properties due to mismatch effect between transmission line and discharge impedance in electron beam controlled discharge gas lasers.
大功率TEACO2激光器系统产生的强电磁干扰主要来源于激光器主放电回路、脉冲火花开关和电源。
The strong electromagnetic interference generated in high power TEA CO2 laser system mainly comes from the main discharge circuit, pulse spark switch and power supply.
本文讨论了氪离子激光器中紫色激光作用的工作原理，放电管的结构设计。
The operation theory of violet lasing in krypton ion laser and the construction design of the plasma tube are discussed.
首次提出了将磁脉冲压缩开关应用于钛宝石激光器中，由磁脉冲压缩开关和闸流管组合作为放电开关。
Magnetic pulse compressor (MPC) with thyratron as discharge switch used in ti: Sapphire laser was put forward for the first time.
采用螺旋形空心阴极放电激励紫外铜离子激光器，实验研究了空心阴极放电，激光增益和激光输出功率特性。
The ultraviolet copper ion laser with helical hollow cathode has been experimentally investigated. The discharge and laser gain and output characteristics were studied.
提出了一种适用于同轴环形放电结构气体激光器的环形螺旋谐振腔，并给出了理论分析。
For gas lasers a helical resonator with coaxial ring discharge structure is proposed, and the theoretical analysis is given.
在此基础上建立了射频激励CO_2激光器放电气体等效电路，为射频电源的成功研制准备了必要的条件。
Based on the analysis and study, the RF excited CO_2 laser of discharging gas equivalent circuit can be designed and provide the essential condition of the RF power.
本文祥细分析了溅射型空心阴极放电(SHCD)铜离子激光器的放电、溅射特性和粒子的相互作用过程，建立了放电模型。
A discharge model on the sputtering hollow cathode discharge (SHCD) copper ion laser is established, its characteristics of discharge, sputtering and the particle interaction processes are analysed.
实验表明，采用多电极和在放电管的入气端加一整流管能有效改善快速轴流CO_2激光器的放电均匀性。
Experiment has showed that the uniformity of discharge of fast axial flow CO_2 laser can be improved by a multiple electrode system and a fluid introducing tude in front of the discharge tube.
实验表明，采用多电极和在放电管的入气端加一整流管能有效改善快速轴流CO_2激光器的放电均匀性。
Experiment has showed that the uniformity of discharge of fast axial flow CO_2 laser can be improved by a multiple electrode system and a fluid introducing tude in front of the discharge tube.
应用推荐