激光扫描系统可以对巨石阵的细节部分进行扫描成像。
标定过程的复杂性制约着计算机视觉技术的应用，三维激光扫描系统也不例外。
Most applications of computer vision are limited by the complexity of calibration process and 3d vision measurement system is not an exception.
研究表明，利用三维激光扫描系统测量树冠体积具有较强的实践意义和应用价值。
It shows that using the three dimension laser scanning and mapping system for measuring tree crown volume is practical and applicable.
目的对牙颌模型三维激光扫描系统的可靠性进行研究，并为其临床应用提供科学依据。
Objective To test the reliability of the three-dimensional dental cast laser scanner for clinical applications.
本发明公开了一种振镜式激光扫描系统，包括激光器、聚焦模块、X轴扫描头和Y轴扫描头。
The invention discloses a kind of vibration mirror type laser scanning system, which includes a laser, a focusing model, an X shaft scanning head and a Y shaft scanning head.
测量装置主要包括高温环境实验箱、加热供电回路、两套高速高温计及一套激光扫描系统构成。
The apparatus mainly consists of a high temperature environmental chamber, a power circuit of heating, two high-speed pyrometers , and a laser scanning system.
介绍了激光扫描系统的原理，三角法测量原理，激光扫描仪的结构特征以及曲面拟合有关问题。
The principle of the laser scanning system, principle of triangulation measuring method, the structure characteristics and the relative affairs about surface fitting of laser scanner are introduced.
实验结果表明，使用了双椭圆聚光腔激光扫描系统的激光输出功率明显高于采用单椭圆柱聚光腔的系统。
As the experiment results, the output power of laser system with double ellipsoidal focus cavity is much higher than that of the laser system with single ellipsoidal focus cavities.
文中介绍了光电二维自动检测仪的测量原理和系统构成，包括激光扫描系统、光栅位移检测闭环控制系统。
The paper has introduced the theory of measurement and whole constitute of the system including laser scan inspection system and grating displacement closed loop inspection system.
分析了激光扫描系统的各个组成部分的特点，研究了RIEGL LMS—Z620激光扫描仪的工作原理。
The characteristics of constitutes part of laser scanner system are analyzed and the principle of RIEGL LMS-Z620 laser scanner is also researched.
阐述了激光扫描系统的工作原理、信号提取过程中的信号转换及数字信号处理方法，并对客观评价的可行性进行了验证。
The operating principle of laser scanning system, signal conversion and processing method during signal extracting process are described. The feasibility for objective evaluation is demonstrated.
考虑到双基地激光雷达不同的应用需求，还设计了仅用于双基地激光雷达系统的激光扫描系统，并给出了相应的接收机设计方案。
Concerned with the different usage, the scanning system only use by Bi-static Lidar system based on prism or oscillating mirror and the receiving system is designed.
本文介绍了共聚焦激光扫描显微镜系统的工作原理及其优良性能。
In this paper, the principle of a confocal laser scan microscope system and its advantages compared with conventional microscope are introduced.
目的探讨准分子激光小光斑飞点扫描联合主动眼球跟踪系统矫正近视的治疗效果及优越性。
AIM: To explore the clinical efficacy of correcting myopia using a scanning-spot excimer laser combined with active eye tracking system.
基于激光扫描检测原理，提出了一种用于测量较大直径的双光束激光扫描尺寸测量系统。
Based on the laser-scanned inspecting principle, a double beams laser-scanned measuring system for size is presented, which is used to measure a diameter.
本文结合主动光视觉技术和被动光视觉技术的优点，开发了环形扫描激光视觉传感器的光学系统。
In this paper, combining the advantages of active light vision technology and passive light vision technology, an optical system of circular scanning laser vision sensor was developed.
同时，此误差校正方法同样适合高精度激光多普勒扫描测量系统。
And the revising methods were also adapted to precise laser Doppler scanning measurement system.
介绍转镜扫描激光显示系统工作原理、主要器件和关键技术。
The operation principle of tilting mirror scan laser display system, the principal device and critical technology are introduced.
对激光扫描测量系统的线性进行了系统的分析；
The linearity analysis of laser scanning measurement has been presented.
本文描述了作者首次依据空间频谱的分布特征，提出了在共焦激光扫描显微系统中实现暗场成像的新途径——离轴成像法。
Based on the spatial spectral distribution, a new method to form images with dark-field ib proposed for applications in Confocal scanning Laser microscopy system.
目的：评价小光斑飞点扫描准分子激光系统用于LASIK手术治疗近视的疗效。
Objective: to evaluate the therapeutic effect of laser in situ keratomileusis (LASIK) for myopia and astigmatism using scanning-spot excimer laser.
系统研究了激光功率、扫描速度、预热温度、铺粉厚度等工艺参数对成型试样质量的影响。
The effects of different process parameters such as laser power, scanning speed, preheat temperature, powder-bed depth on the sintered quality were studied systematically.
本文主要进行了激光电视扫描系统的研究。
This paper mostly focused on the scanning system in Laser TV.
利用激光狭缝扫描原理和光电传感技术，提出了一种用于测量大型回转体类零件圆度误差的激光扫描非接触测量方法和测量系统。
A laser scanning non contact measuring method and a measuring system for the roundness errors of large sized rotating parts are presented.
本文对商品化的三维激光扫描测量系统中的控制技术和随动跟踪测量技术进行重点研究。
In the dissertation a study of computer auto control system and a kind of tracking and measurement method of the commercial 3d laser scanning system.
解决了安装调试时的困难，为下一步扫描式激光多普勒测振系统奠定了坚实的基础。
So the difficulty in installation and debugging is solved, and the solid foundation for developing the Scanning Laser Doppler Vibrameter is settled.
本文探讨一种使用单模光纤同时作为点源与点探测器的激光共焦扫描显微系统。
A laser scanning confocal microscope that utilizes a single-mode optical fiber as both the source and the datection aperture is described.
本文探讨一种使用单模光纤同时作为点源与点探测器的激光共焦扫描显微系统。
A laser scanning confocal microscope that utilizes a single-mode optical fiber as both the source and the datection aperture is described.
应用推荐