对激光扫描测量系统的线性进行了系统的分析；
The linearity analysis of laser scanning measurement has been presented.
介绍了基于计算机视觉三维激光扫描测量系统。
A 3d laser scanning measure system based on computer vision was introduced.
对激光扫描测量系统的线性进行了系统的分析；
The paper analyses optical and circuit system of laser scan micrometer.
激光条纹图像质量直接影响三维激光扫描测量系统的精度。
The quality of laser stripe images has direct effect on the accuracy of system.
本文对商品化的三维激光扫描测量系统中的控制技术和随动跟踪测量技术进行重点研究。
In the dissertation a study of computer auto control system and a kind of tracking and measurement method of the commercial 3d laser scanning system.
在立体视觉的激光扫描测量系统中，物体的空间坐标与计算机图像坐标之间存在着复杂的非线性映射关系。
There is complex nonlinear mapping between the object space and image space in the 3d machine vision metrology.
针对复杂型面刀具的设计要求和结构特点，研究开发了一种基于点采集的高精度非接触式激光扫描测量系统。
Aiming at the design demand and structure character of complex surface tools, a high precision non-touching laser scanning system based on point sampling was studied and developed.
本文讨论了一种基于计算机视觉原理的三维激光扫描测量系统的原理，组成，工作过程，精度分析和在工程实际中的应用。
The principle, component, components, work process, accuracy analysis and application in the fulfillment of the 3D laser scanning system based on machine vision is discussed in the paper.
基于激光扫描检测原理，提出了一种用于测量较大直径的双光束激光扫描尺寸测量系统。
Based on the laser-scanned inspecting principle, a double beams laser-scanned measuring system for size is presented, which is used to measure a diameter.
研究表明，利用三维激光扫描系统测量树冠体积具有较强的实践意义和应用价值。
It shows that using the three dimension laser scanning and mapping system for measuring tree crown volume is practical and applicable.
同时，此误差校正方法同样适合高精度激光多普勒扫描测量系统。
And the revising methods were also adapted to precise laser Doppler scanning measurement system.
测量装置主要包括高温环境实验箱、加热供电回路、两套高速高温计及一套激光扫描系统构成。
The apparatus mainly consists of a high temperature environmental chamber, a power circuit of heating, two high-speed pyrometers , and a laser scanning system.
本文针对水轮机修复专用机器人视觉系统，采用基于三角测量原理的主动视觉法中的激光扫描法对水轮机转轮叶片缺陷进行检测。
The paper adopts laser scanning of the method of positive vision basing on the principle of triangle measure to detect the drawback of hydraulic turbine blade.
在激光扫描检测技术中，被测件边缘信号的检测精度将直接影响到系统测量的精度。
The system precision is directly affected by the sample edge measurement precision in laser scanning measuring technology.
利用激光狭缝扫描原理和光电传感技术，提出了一种用于测量大型回转体类零件圆度误差的激光扫描非接触测量方法和测量系统。
A laser scanning non contact measuring method and a measuring system for the roundness errors of large sized rotating parts are presented.
基于激光扫描检测技术，现采用激光球面反射扫描原理，提出了一种曲臂两臂轴径的激光非接触检测方法和测量系统。
Based on laser-scanning measuring technology, a laser non-contact measuring method of arm diameter for crankshaft and a measuring system by using the laser scanning principle are presented.
文中介绍了光电二维自动检测仪的测量原理和系统构成，包括激光扫描系统、光栅位移检测闭环控制系统。
The paper has introduced the theory of measurement and whole constitute of the system including laser scan inspection system and grating displacement closed loop inspection system.
介绍了一种牙颌模型激光三维扫描测量分析系统。
This paper describes a laser 3D scanning, measuring and analyzing system designed for dental cast.
介绍了激光扫描系统的原理，三角法测量原理，激光扫描仪的结构特征以及曲面拟合有关问题。
The principle of the laser scanning system, principle of triangulation measuring method, the structure characteristics and the relative affairs about surface fitting of laser scanner are introduced.
在激光扫描法尺寸测量系统中，激光能量必须保持稳定。
In the system of size measurement by laser scanning, it is necessary to keep laser energy stability.
并针对三维激光测量系统和关节式测量系统，分别提出了预扫描的随动测量技术和信号跟踪算法的随动测量技术。
Aiming at the 3-d laser measurement system and the joint-type measurement system, the paper put forward the technology of tracking measurement based on pre-scanning and signal separately.
基于合作靶标的激光扫描车身坐标测量传感器，是运用四光束激光扫描测量原理，综合运用激光、光电、精密测量等技术进行非接触二维或者三维坐标测量的检测系统。
The Auto Body coordinate Laser Scanning Sensor Basing On Collaboration Target is a 2D or 3D coordinate measuring system using a kind of measuring principle which named four-beam laser scanning.
基于合作靶标的激光扫描车身坐标测量传感器，是运用四光束激光扫描测量原理，综合运用激光、光电、精密测量等技术进行非接触二维或者三维坐标测量的检测系统。
The Auto Body coordinate Laser Scanning Sensor Basing On Collaboration Target is a 2D or 3D coordinate measuring system using a kind of measuring principle which named four-beam laser scanning.
应用推荐