抽运方法已成为影响光纤激光器输出功率的关键因素，有比较重要的意义。
The pumping method has become the key factor which affects the output power of fiber lasers.
目前激光器输出功率受限于泵浦功率，增加泵浦源的数目有望进一步提高输出功率。
The experimental results have demonstrated the potential for higher output power with more powerful pump source.
在半导体激光器芯片腔面镀上钝化薄膜是提高大功率半导体激光器输出功率的有效方法。
The coating passivation film method on the facets of semiconductor laser diodes is effective to the increase of output powers of high powers semiconductor laser diodes.
但是半导体激光器输出功率较小，在几十到几百豪瓦量级，在一些实际应用中受到一定的限制。
However, the output power of semiconductor lasers is too small, which is about in the tens to hundreds of milli-watts magnitude, so in some practical applications, it is a big problem.
介绍了以激光输出功率为对象的激光谐振腔的自适应过程，从而使激光器输出功率一直处于良好状态。
This article describes adaptive process of laser resonator for laser outpower, so that laser outpower is with better status.
对输出镜的曲率半径、输出镜透过率、泵浦光斑大小以及热沉温度对激光器输出功率的影响也作了研究。
The effects of the curvature radius, the transmission of output coupler, the spot size of the pump, and the temperature of the heat sink on the output power are investigated.
数值研究了非相干光反馈时半导体激光器输出功率随反馈系数的变化关系以及待测物体离焦量与反馈系数的关系。
Relationships between output power of laser diode and optical feedback coefficient, optical feedback coefficient and defocusing amount are numerically investigated.
在实验上研究连续掺铬氟化锂锶铝激光器输出功率与泵浦功率的关系，发现转换效率随着泵浦功率的增加而下降。
The relation between the output power and pump power for CW the cr: LiSAF laser is experimentally studied, and that the transform efficiency decreases with pump power is discovered.
在无催化剂的情况下，获得U型腔激光器输出功率3.5W和相同条件下的直线型激光器输出功率4.5W，证实了该U型腔设计的可行性。
The power output of U-folded laser without catalyzer, 3.5W has been gotten, while the corresponding unfolded laser, 4.5 W. This result indicates the availability of the forementioned design.
试验表明：通过调节激光器的输出功率、光斑直径和扫描速度可以方便地控制熔化层深度和表面平整度。
The experimental result shows that the depth of hardened zone and smoothness of surface can be controlled conveniently by varying the power output beam diameter and scanning rate of laser light.
对这种氦氖激光器，可利用增加其横向尺寸来提高输出功率。
The output power of this He-Ne laser can be enhanced by increasing its transverse dimension.
该方法适用于输出功率为数瓦的光纤激光器和放大器的侧面抽运。
This method suits for pumping the fiber laser and amplifier of several watts output power.
通过研究铜空心阴极激光器阈值特性、气体混合比和放电温度对激光输出功率的影响，给出了一些新的结果。
Some new results are given through investigation on threshold feature of the laser, effect of gas mixture ratio and discharge temperature on the laser output power etc.
而利用双棒或多棒串接技术能有效地提高固体激光器的输出功率(能量)。
The use of two-rod or multi-rod connection technology can effectively improve the solid-state lasers output power (energy).
利用多泵浦源提高单根光纤激光器的输出功率，利用二维光纤激光阵列排列增加参与组束的光纤数目。
The multiple pump sources are used to increase the output power of single fiber laser, and the two dimensions arrange of fiber laser array increases the number of combining fibers.
全固态单频单模激光器的频率稳定性以及最佳匹配输出功率对温度非常敏感。
Frequency stability and the best match output power of the full solid-state single frequency single mode laser are extremely sensitive to the temperature.
采用一种新的工艺方法提高了垂直腔面发射激光器的输出功率。
A new process method is proposed to improve the light output power of GaAs vertical cavity surface-emitting lasers (VCSELs).
为旋转火花隙在更高输出功率的TEA CO_2激光器中的应用奠定了技术基础。
Technical foundation has been settled for applying the rotating spark gap to higher output power TEA CO2 lasers.
用一台输出功率约2千瓦的横向流动CO_2激光器对碳钢、铸铁进行表面热处理。
We have used a transversely-excited flowing CO2 laser with the output power of about 2kw for heat-treatment of the surface of carbon-steel.
利用线性模型求出了级联掺磷拉曼光纤激光器各级光输出功率的显式近似解。
In this paper, the approximate explicit solution of optical output power for P-doped cascaded Raman fiber lasers was acquired by linear model.
为了增加光纤激光非相干组束的输出功率，针对光纤激光器阵列提出了优化的方法。
In order to increase the output power of incoherent fiber laser combination, the optimized methods are put forward, mainly concentrating on the fiber laser array.
在TEACO2激光器中采用流动技术可以极大地提高输出功率。
The output power can be greatly increased by making use of gas flowing technology in TEA CO2 laser.
基于该模型，分析了激光器振荡频率偏移与输出功率变化特性。
The characteristics of oscillation frequency shift and output power changes of the laser diode are analyzed by using the theoretical model.
在考虑了俄歇效应的情况下，用行波速率方程组研究了半导体激光器的输出功率与端面反射率的关系。
Taking into account the Auger effect, the output-enhancement coatings applied to the facets of the semiconductor lasers have been investigated using a set of travelling wave rate equations.
采用螺旋形空心阴极放电激励紫外铜离子激光器，实验研究了空心阴极放电，激光增益和激光输出功率特性。
The ultraviolet copper ion laser with helical hollow cathode has been experimentally investigated. The discharge and laser gain and output characteristics were studied.
为提高光纤激光器的输出功率提供了理论依据。
It will be helpful for improving the output power of fiber lasers in theories.
由于受到纤芯面积、非线性效应等因素的限制，单芯光纤激光器的输出功率极限值为千瓦级。
The maximum output power of an optical fiber laser using conventional single core fiber is only several kilowatts due to the nonlinear effect in fiber and the limited cross -section of fiber core.
该系统用于染料激光器中作为光束扩展器，具有调整简便，光能损耗小等优点，可提高染料激光器的转换效率和输出功率。
The system used as beam expander for dye laser, which has advantages of conveniently regulate and petty loss of light energy, transformation efficiency and output power of dye laser is increased.
双包层光纤激光器是目前研制出的功率最大的光纤激光器，它的激光输出功率可达几百瓦。
Double cladding fiber laser is the one that outputs maximum power currently, whose output power can approach to hundreds watt.
双包层光纤激光器是目前研制出的功率最大的光纤激光器，它的激光输出功率可达几百瓦。
Double cladding fiber laser is the one that outputs maximum power currently, whose output power can approach to hundreds watt.
应用推荐