激光三角法测量原理是目前光学测量应用最广泛的方法之一。
The triangulation method with using a laser is the most widely-used one in this area.
介绍了一种基于激光三角法的激光等距非接触测量车身曲面的装置。
In this paper, a automotive body surface measuring instruments with non contact equidistant surface measuring method based on laser triangle measurement has been developed.
以CCD获取测量信号为基础的激光三角法测量技术被广泛运用于物体的非接触式测量。
The triangular laser measuring technique based on CCD is widely used in non-contacted measuring requirements.
本文通过对测量曲面面型的各种方法的比较，明确了激光三角法在曲面测量中具有优势。
This paper first introduced the methods of curved surface measurement, especially introduced the character of Laser triangulation measurement.
在用激光三角法对同质物体进行三维探测中，可能因为条纹缺陷等原因出现轮廓提取误差。
During 3-d detection of objects with same reflectance by laser triangulation, profile extraction error may appear because of loss of stripes.
激光三角法测量，因其具有快速、精确、动态、大范围测量的优点，广泛运用于在线精密测量。
The laser triangulation is used on assembly line extensively because of its rapidity, high precision, long range and dynamic measurement.
浮法玻璃生产线玻璃带厚度在线检测技术采用了激光三角法位移测量原理，在退火窑热端进行玻璃带测厚的方案。
Adopt laser trigonometry displacement measure theory in the detection of glass thickness on line and the method in the hot side of annealing kiln.
为了大幅度提高三维信息获取速度，提出了一种基于智能相机和激光三角法的高速三维信息获取与表面重建的系统，介绍了该系统的硬件架构和信号处理。
In order to improve the measurement speed, a fast 3-d information acquisition and surface reconstruction system based on smart camera and laser triangulation was presented.
本文在比较各种板厚测量方法的基础上，根据成象原理着重论述了差动式激光三角法测厚技术，讨论了聚先进键和咸象系统结构参数的设计，分析了板材抖动产生的动态测量误差，并提出自动补偿的途径。
The design prameters of focus lens and image system are given, and the dynamic measurement error in vibration of the plate is also analyzed, and the way of its autocompensation is presented.
研究的对象是基于激光三角测量法获得的船体分段面三维数据。
The research aims at a data of the ship body that acquired according to the triangle diagraph method of laser.
采用投影覆盖法结合激光三角测试技术，直接测定了混凝土断裂表面分维值。
The fractal dimension of fracture surface was measured directly by using projective covering method and laser triangulation technique.
介绍飞机表面划痕非接触测量的激光三角扫描法。
In this paper a laser triangulation scanning method for the non-contact measurement of scratches on aircraft skins and aircraft window surfaces is described.
在光学测量中，激光三角测量法是一种常用的非接触测量方法。
In the optics measurement, laser triangulation measurement is one of common methods of noncontact measurement.
本文介绍了平直度定义、激光三角形法测量平直度的原理以及在我国的应用情况和安装使用中应注意的问题。
This paper introduces the theory of laser triangle rule to measure flatness and its application in our country. It also gives the problems in setting should be pay attention to.
CCD激光微位移测量头是利用三角法原理设计的一种高精度非接触激光微位移传感器。
CCD micro-displacement measuring system is an ultra high accuracy non-contact laser displacement device on the basis of trigonometry theory.
本文针对水轮机修复专用机器人视觉系统，采用基于三角测量原理的主动视觉法中的激光扫描法对水轮机转轮叶片缺陷进行检测。
The paper adopts laser scanning of the method of positive vision basing on the principle of triangle measure to detect the drawback of hydraulic turbine blade.
用有限元法计算模拟了三角均匀分布侧面泵浦结构激光棒瞬态温升过程及稳态温度分布情况。
The temperature field and warming process of the transient and steady state in the laser rod by symmetrical trigonal side-pumping were simulated using the finite element analysis method.
本文介绍了一种集ccd摄像机和激光同步扫描三角法面形传感器为一体的机器视觉传感集成体系。
An integrated structure of machine vision sensor, involving a CCD camera and a laser synchronized scanner for triangular 3d surface measurement, is presented in this paper.
介绍了激光扫描系统的原理，三角法测量原理，激光扫描仪的结构特征以及曲面拟合有关问题。
The principle of the laser scanning system, principle of triangulation measuring method, the structure characteristics and the relative affairs about surface fitting of laser scanner are introduced.
提出一种基于固定激光扫描点的三角投影法测量建筑物大目标三维尺寸的方法。
A trigonometric projection method based on fixed laser scanning points for measuring 3-d large building is proposed.
本文在深入研究激光三角测量原理的基础上，提出了一种三维曲面的激光双三角测量法，并给出了设计要点。
On the basis of a thoroughgoing study of the principle of laser triangle measuring method, a laser two-triangle measuring system for 3-d...
本文在深入研究激光三角测量原理的基础上，提出了一种三维曲面的激光双三角测量法，并给出了设计要点。
On the basis of a thoroughgoing study of the principle of laser triangle measuring method, a laser two-triangle measuring system for 3-D curved surface is described.
最后列出采用VHDL制作CCD工作时序的方法，基于这种方法把它用于光学三角法的激光测微头。
At last, the method to produce the working signal of CCD in detail with using VHDL is listed. Based on the method, it is used in laser device of optic triangle measuring.
最后列出采用VHDL制作CCD工作时序的方法，基于这种方法把它用于光学三角法的激光测微头。
At last, the method to produce the working signal of CCD in detail with using VHDL is listed. Based on the method, it is used in laser device of optic triangle measuring.
应用推荐