在潮湿土壤内埋设的金属管道可能在管道底部腐蚀。
A metal pipe buried in moist soil may corrode on the bottom.
在沿海潮湿地区，汽车的腐蚀问题十分突出，但易被人们所忽视。
Corrosion of vehicles in wet region along the coast is a very prominent problem.
桥梁用预应力钢丝钢绞线都在高的交变应力状态下服役，加上海水、潮湿环境的影响，更加速其应力腐蚀的速率。
Prestressed steel wire and strand for bridge are used in the condition of high alternating stress with humidity atmosphere and sometime seawater atmosphere, which speed up the corrosion.
不锈钢深沟球轴承能够避免潮湿和其他因素造成的腐蚀。
Stainless steel deep groove ball bearings that can withstand moisture and a number of corrosion caused by other media.
分析了沿海挡潮钢闸门长期受浸泡海水、干湿交替、日光曝晒、沿海盐雾、海生生物及潮湿空气的腐蚀情况。
Corrosion of coastal floodgates in environments such as seawater, dry wet exchange, exposure in sunlight, coastal salty air, marine animals and plants and moist air was described.
由于煤矿井下地面潮湿，电缆腐蚀严重，信号不好，有线通信装置维护困难。
It is difficult to maintenance the wire communication device in the pit because the ground is wet, cable corrosion is serious and sign al is bad.
整体式全封闭结构，确保在各种潮湿(可在水下1.5米处正常工作)、粉尘及腐蚀性环境中工作。
This product is fully closed structure and can work in every moist (it still can normal working under water 1.5 meter), dust and corrosiveness environment.
潮湿的盐雾环境和化学氧化膜的薄而软是引起腐蚀的主要原因。
It is mainly reason that wet and salt spray environment and thin film of chemical oxidation.
用于海水和潮湿大气应力腐蚀环境下的压力容器管束专用无缝钢管。
Pressure vessels for seawater and humid atmospheric stress corrosion environment dedicated seamless steel tubes.
文章就解决潮湿表面防腐蚀问题进行了现场实际挂片试验。
To solve the corrosion problem of the wet surfaces, coupon test was conducted.
结果表明，该方法可以有效地改善镁合金表面耐全面腐蚀、点蚀的性能，提高镁合金表面在温热潮湿环境下的稳定性。
The results show the method can effectively enhance uniform and pitting corrosion resistance of magnesium alloy surface, improve stability under moist atmosphere corrosion.
现场的环境条件，如环境温度、腐蚀情况、振动、潮湿程度等。
Circumstance condition on spot, such as circumstance temperature, corrosive state, vibration, dampness degree, etc.
FM 110两种含PTFE涂层不但在常温下具备耐磨、防腐蚀和防粘等优良的综合性能，而且在加温状态下，在干燥空气和潮湿空气中都显示出了优良的耐磨、防腐蚀和防粘性能。
The results showed that FF 1, FM 110 coatings, which were composed of PTFE, had good tribological properties at room temperature as well as elevated temperatures, in dry or moist air.
适用环境采用高强度合金外壳，进行特殊的表面喷涂和密封处理，可在高温潮湿和各种腐蚀性等恶劣环境下长期使用。
Applicable environment USES high strength alloy enclosure, undertake special surface spraying and seal processing, can in hot humid and various corrosive such harsh environment for long-term use.
具有重量轻、高温、潮湿、腐蚀、易燃烧等优点。
It is light, high temperature resistant, dampness resistant, corrosion resistant, dampness resistant and burning-free, etc.
ISOTEMP适用于封密组件，可防潮湿、盐份、霉菌和腐蚀蒸汽的侵蚀。
ISOTEMP is suitable for sealing components from humidity, salt, fungus and corrosive vapors.
耐候性强：表面具有良好的耐酸、碱、盐雾等腐蚀性，适合各种潮湿、腐蚀性强的环境使用。
Ageing resistant: The surface has good acid, alkaline, salt fog resistance. It is suitable to be used in wet and high corrosive environment.
物理性：不变形，抗潮湿，阻燃性强，抗腐蚀。
Physical: no deformation, anti-humidity, strong flame-retardant, anti-corrosion.
特别能有效防护潮湿、水汽、灰尘、各种化学腐蚀性气体、弱酸弱碱等化学腐蚀物质的侵蚀；
Especially prevent the corrosion effectively from moist, water vapor, dust, various sorts of chemical corrosive gas, chemical corrosive substances such as weak acid weak base;
而且该产品具有较好的弹性，而磨、耐热、耐寒、耐老化、耐酸碱腐蚀、防潮湿、防滑、防震等特点。
However, it has the characteristic of high-elasticity, anti-wear, anti-aging, anti-corrode and anti-heat, anti-shock.
而且该产品具有较好的弹性，而磨、耐热、耐寒、耐老化、耐酸碱腐蚀、防潮湿、防滑、防震等特点。
However, it has the characteristic of high-elasticity, anti-wear, anti-aging, anti-corrode and anti-heat, anti-shock.
应用推荐