因此，本文对其进行简化，得出满足工程精度要求的简易近似计算公式。
So, predigested calculation was applied to find the simple approximate formula meeting the request of engineering precision.
结果表明：所建立的测试系统可满足工程精度要求，能有效识别拖拉机主要噪声来源；
The results indicate that the established test system meet the requirement of engineering precision and can distinguish main tractor noise source effectively.
按本方法编制的程序可满足工程精度要求，且具有实用价值，已成功嵌入结构分析程序中。
Based on this method, a computer program has been developed, which satisfies the accuracy of the engineerings and has successfully joined into the structural analysis program for application.
仿真结果满足工程精度要求，最大计算误差为9.1%，因而可以替代试验而作为衡量压实效果的依据；
The maximum simulation error is less than 9.1%, so it meets the needs of the engineering veracity and it could replace experimentation to measure the impact effect.
研究结果表明，高阶快速多极边界元法易于分析此类大规模问题，并具有很高的数值计算精度，满足工程设计的要求。
The results show that the higher-order, fast multipole boundary element method can be applied to large problems with high numerical accuracy for engineering designs.
经试验验证，在物理力学性质相差不大的层状地基中，计算值与实测值相当接近，可满足工程的精度要求。
The test shows that tEe calculating value is same as the practical measuring value when the physical nature of bed foundation is similar, therefore meeting the requirement of engineering's precision.
从训练曲线和检验曲线上看，软测量仪表达到一定的精度，满足工程要求。
From the training and testing curve, software instruments obtain certain accuracy, satisfying the requirement of project.
后图形处理程序，计算程序的精度满足工程设计要求，是行波管周期永磁聚焦系统的良好辅助设计手段。
The accuracy of the calculating pro-grams meets the demand of engineering design, and is a good CAD tool for developing the TWT 'ppm focusing system.
作者提出的实用空间分析法，简单实用又便于配筋，计算结果的精度能满足工程设计的要求。
The practical space method is simple and convenient for locating steel bar and the accuracy of computation can satisfy the design requirement.
实例表明，模型预测精度可满足工程实际的要求。
The results show the accuracy of model satisfies the engineering requirement.
经与矫直力实测结果比较， 证明该计算体系的计算精度满足工程的要求。
Through comparison with the actual measurement result, it is approved that this calculation system meet the calculation precision requirements of the project.
使用这种计算方法可以简化计算过程，同时能满足工程设计的精度要求。
To use this calculation method can simplify the calculation course, at the same time, it could meet the accurate requirement of engineering design.
将CCD应用于几何量测量中，可以满足高精度测量、在线动态检测和非接触测量等的工程实际要求。
Advantages of CCD in geometrical quantity measurement are high accuracy, on-line dynamic detection and non-contact measurement.
精度足以满足工程设计要求。
根据波动理论，满足随机响应工程计算精度要求的有限元网格大小与待求高频随机响应问题的频率范围上限有关。
According to wave motion theory, finite element mesh size satisfying the needs of engineering calculating precision is relevant to the upper limit of frequency range of random (response) problems.
经与实测数据相比较，说明精度可满足一般工程计算的要求。
By comparing with the practically monitoring data, it has been proved that the precision shall meet the requirement of conventional engineering calculation.
研究结果表明，改进的BP网络性能良好，所建立的模型预测精度高，能满足工程要求，是一种有效可行的预测新方法。
The result show that the developed BP model is advanced, can satisfy the requirement of engineering in practice and is a new effective method for prediction.
为满足三峡工程变形监测的精度要求，对深埋三维倒垂和变形监测基准系统进行研究。
D deeply embedded inverted plumb and deformation monitoring system has been studied for achieving required accuracy in monitoring Three Gorges project.
该方法简化了消光系数的计算过程，能够满足工程测量的精度要求，有助于光脉动法在线测量的实现。
It simplifies the calculation of the extinction coefficient, meets the engineering measurement requirement, as well as helps to implementing real-time measurement.
目前计算机自动解译的精度还不能普遍满足人们对工程提出的各种要求。
Now the accuracy of automatic interpretation using computer can not generally satisfy the various requirements of the projects.
应用节点系统分析方法分析油井的实践表明，该方法的计算精度较高，满足工程计算要求。
Practice of oil Wells analysis by using Nodal systematic analysis method shows that the calculation precision of this method is relatively high and can meets the need of engineering calculation.
现有的各种电容提取软件还远远不能满足实际工程的要求，提高电容提取的精度和速度仍是以后的一项艰巨的任务。
For the existing capacitance extraction software can hardly satisfy the needing of actual project, it is still a hard task to improve the accuracy and speed of capacitance extraction.
实验证明，开环测漂方案既能满足精度要求，又能保证快速性，切合工程实际的需要。
Experimental results show preliminarily that our open-loop method for obtaining gyro drift can meet the precision and speed requirements needed for initial alignment of INS in China.
计算结果表明，该模型精度好，可以满足工程计算要求。
The results of calculation indicate that this model is good in precision. lt will meet the needs of engineering calculation.
通过一些算例与文献结果的对比，表明本程序系统能够满足工程上的精度要求。
A comparison with the results of existing methods shows that this procedure can better satisfy the demands of precision in engineering.
例题分析表明，提出的模型能够模拟结构的实际地震反应，计算精度满足工程要求。
The analysis results show that the suggested model can simulate the structure earthquake response and the precision meets the engineering requirement.
计算结果与起重机设计寿命基本相符，表明计算结果满足工程上精度要求，该寿命模型是实用和可行的。
The results accords with the designed life of the crane by and large, showing that calculation results meet required precision for engineering, and that life fatigue model is practicable.
调试和运行结果表明，该系统测量精度高、性能良好，其设计完全满足工程要求。
Tests and operation results indicate that the system has high measurement accuracy and good performance, and its design totally meets the project requirements.
计算结果表明，这种等效计算法省工省时，精度满足要求，可用于实际工程。
The results showed that this method can not only save of man-power and computer time. but also meet precise requirements, so it can be applied in the engineering practice.
数值算例表明，本文方法精度能满足工程设计要求。
The numerical example shows that the accuracy of this method satisfies the engineering requirements.
应用推荐