介绍了基于VB环境的滚齿刀cad系统的构成与主要模块功能。
The make up and modular function of a CAD system for gear cutter hob based on VB condition are introduced.
介绍剃齿刀、插齿刀、滚齿刀的微机设计和校验计算程序的编制及其应用。
Introduces the composition and application of a microcomputer pro-gram used for designing and calculation checking of gear shaver, shaper cutter and hob-ber.
应用齿顶整圆弧滚刀是提高齿轮弯曲疲劳强度的有效措施之一。
Full radius hob on tooth tip is one of the effective measures by increasing gear tooth bending strength.
在研究滚刀加工不同齿数带轮所形成的误差分布规律及误差对带与轮啮合传动影响的基础上,确定了滚刀可加工的齿数范围与参数。
At the basis of distribution law of error formed by the processed pulley with various teeth and its effect on transmission, the scope of tooth of pulley processed is defined.
该系统可优化滚刀设计参数,自动校核齿背铲磨,实现齿轮刀具快速可靠的设计。
This system can optimize the parameter of gears, check relief grinding of tooth back automatically and design the gear hobs rapidly and reliably.
分析了滚刀齿高和齿顶倒圆半径对所切齿轮齿根弯曲应力的影响。
And it analyzed that hob tooth height and tooth top pour round radius impacted on gear tooth root crooked stress.
介绍了硬齿面滚刀倒棱的齿形计算公式和误差分析,探讨了新型的倒棱滚刀结构方式及制造工艺。
Profile formula for hard gear chamfered edge hob and its error analysis are introduced. A new kind of chamfered edge hob structure and manufacturing engineering are investigated.
滚刀、插齿刀设计成较大的修缘角,有利于提高啮合质量。
Designing of external gear shaper cutter with large tip relief Angle can improve the meshing quality.
本文阐述了滚刀滚齿时齿轮齿根过渡曲线的延长渐开线的等距线与齿轮齿形渐开线的关系。
This paper discussed the relationship between the involute pitch of tooth root and tooth profile involute in hobbing.
介绍了齿顶整圆弧滚刀的应用和设计。
This paper introduces application and design of full radius hob on tooth tip.
环纹滚刀可以实现高效率的径向进给滚齿加工。
The ring teeth hob can realize high efficient radialfeedhobbing.
当前,齿顶整圆弧滚刀广泛应用于重型汽车变速器齿轮的生产中。
At present, full radius hob is used extensively for heavy transmission gear production.
如果以齿纹中点法剖面作为齿形检测和设计剖面,用平面啮合法设计花键滚刀时,则齿形误差最小。
If the normal section in the center of the tooth line is taken as a tooth measuring and design section, when spline hob is designed in a plane meshing, the tooth profile error is minimum.
介招了带轮滚刀(梯形齿)的齿形计算公式。
In this paper, the calculating formula of profile of belt wheel gear hob cutter was introduced.
按照此法计算,可使滚刀齿廓上的计算点均匀分布,提高滚刀的设计精度。这种方法可应用于类似的刀具设计中。
With this method, the calculated points distribution of the tooth outline are uniform, thus the design accuracy is increased remarkably.
提出了高扭矩抛物线齿同步带轮滚刀齿形的设计方法。
This paper puts forward a design method of pulley hob with parabolic tooth shape, which is used in the high torque drive.
齿轮滚刀常用的加工外啮合直齿和斜齿圆柱齿轮的刀具。
The processing of gear hob used the meshing straight teeth and helical cylindrical gears of cutting tools.
讨论了固定安装滚刀的结构特点及少齿数齿轮加工技术的可实现性。
It discussed the structure characteristic of fixed hob and machining technology feasibility of small teeth gear.
指出通过计算作出图形,可分析出滚刀齿顶圆弧的设计是否合理。
It pointed out that the design of gear cutter should greatly increase the tooth point arc so as to reduce the stress concentration to increase the force of tooth root.
本文提出了一种通过改变滚刀每个刀齿的切削厚度与切削宽度的,新型的高生产率滚刀—轮切式齿轮滚刀。
A new type of productive hob which can change the cut width and depth on each tooth of the hob is presented in this paper. It's title is turn cutting hob.
滚削蜗轮时,其齿侧面为滚刀切削刃在一系列不同位置的包络面,因而不可避免地要产生棱面。
The surface of worm gear is formed by the different positions of worm wheel hob generated as machining. So prisms are inevitably produced.
圆弧齿、双螺距、渐开线等特殊蜗轮滚刀也可以订货。
Special worm gear hobs with circular tooth, double pitch and involute etc, can also be ordered.
定装滚刀各齿齿形不同﹐只有最后一个齿是精切齿。
It is the top gear tooth shape, only different last tooth is the fine teeth.
滚刀上其馀的刀齿都是粗切齿。
在动力齿轮传动中,滚刀的设计一般是已知基本齿条的齿廓方程,求解的是滚刀和齿轮的齿廓方程。
In power gear transmission, the equation of the basic rack profile must be known in general. It's the equation of the hob and the gear profile that need be deduced.
介绍了中硬齿面齿轮的刮削工艺,叙述了用硬质合金滚刀对齿面进行刮削加工的工艺参数选择原则及刮削要点。
The principle for the selection of technology parameter and the main points for processing the tooth surface by scraping with the carbide hob were stated.
本文提出了对直槽零前角滚刀,原始截面刃形在基本蜗杆齿面上,其新滚刀刃形的计算方法。
This paper presents a calculating method for the edge of a new hob with straight groove and zero rake Angle. The original section edge of the said hob is on the surface of basic worm.
本文提出了对直槽零前角滚刀,原始截面刃形在基本蜗杆齿面上,其新滚刀刃形的计算方法。
This paper presents a calculating method for the edge of a new hob with straight groove and zero rake Angle. The original section edge of the said hob is on the surface of basic worm.
应用推荐