该粉末产品耐磨性，耐蚀，耐滑动摩擦性好。
The powder product wear resistance, corrosion resistance, good sliding friction.
如果滚动摩擦代替了滑动摩擦，摩擦力将大大减少。
If rolling friction is substituted for sliding friction, the friction will be considerably reduced.
如果滚动摩擦代替了滑动摩擦，摩擦力将大大减少。
The rolling friction is substituted for sliding friction results in a considerable reduction in friction.
磨损量与滑动摩擦功呈线性关系，与滑动距离成正比。
Mass loss is linear with sliding friction works and in proportion to sliding distances.
系统地研究了铸铁材料在干滑动摩擦条件下的摩擦学特性。
The tribological characteristics of cast iron under dry sliding condition was systematically investigated.
用摄动法分析刚球在非线性滑动摩擦力作用下的运动规律。
The perturbation method is used to analyse the motion of the rigid sphere under the action of the nonlinear sliding friction.
梯度薄膜在较大的载荷条件下，具有良好的滑动摩擦性能。
The gradient(Ti, Nb)N film possesses better sliding friction property under higher loads.
胶合、咬死现象是高速、重载滑动摩擦副常见失效形式之一。
Scuffing appears mainly in sliding contacts under high speed-heavy load conditions.
在干滑动摩擦过程中，磨损机制主要为氧化磨损和粘着磨损。
The wear mechanisms during dry sliding process are oxidation wear and adhesive wear.
如果我们这样做了，会发现两接触面间的滑动摩擦力也加倍了。
If we do so we find that sliding friction between the surfaces in also doubled.
而保证一个平面沿着另一个平面相对移动的力称为滑动摩擦力。
The force which must be overcome to keep one surface moving over another in known as sliding friction.
文摘：系统地研究了铸铁材料在干滑动摩擦条件下的摩擦学特性。
Abstract: The tribological characteristics of cast iron under dry sliding condition was systematically investigated.
实验发现，棒在颗粒物质中运动时滑动摩擦力具有准周期振荡性质。
It is found that sliding friction between continuous medium and granular materials has a novel speciality of quasi-periods oscillatory.
这为解释往复滑动摩擦噪声只在向上行程末期发生的原因拓宽了视野。
This difference seems to be applied to explain the cause why the squeal only occurs in the end of the upward-stroke under reciprocating sliding.
所有的圆柱滚子推力轴承，滑动摩擦增加，可能会出现圆柱滚子的结束。
With all cylindrical roller thrust bearings, increased sliding friction can occur on the end of the cylindrical rollers.
运用部分膜承载热弹流理论计算齿轮传动中的滑动摩擦力和滚动摩擦力。
Upon the theory of hot elastohydrodynamics about part film load bearing, the sliding and rolling friction forces in gear transmission device can be calculated.
在这一研究的基础上，本文对滑动摩擦转移膜的形成提出粘着转移机制。
Based on this study, a adhesive transfer mechanism is proposed for the formation of transferred films during sliding wear in this paper.
干滑动摩擦磨损实验表明：施加电磁搅拌后，复合材料的耐磨性能提高。
The dry friction experiment showed that the wear resistance of the composite was greatly improved by electromagnetic stirring.
本文提出了一种基于迭代技术的边界元法求解三维无滑动摩擦型弹性接触问题。
A boundary element method based on an iterative technique for solving the three-dimensional elastic contact problem without sliding is presented.
本文提出一种柔性地下层和一个滑动摩擦表面相结合的新隔震体系供大家讨论。
A new base isolation structural system which combines a flexible underground story with sliding frictional interfaces is proposed in this paper.
密炼机的主要是轴子轴与轴承衬的滑动摩擦表面磨损，变得粗糙，造成轴承漏油。
Is mainly the axle axis and the bearing bush sliding friction surface wears, becomes rough, creates the bearing oil leak.
滑动摩擦系统是一种本质非线性振动体系，尚有许多理论和工程实际问题有待解决。
In nature, a sliding friction system is a nonlinear vibration one, there are still many problems, in theory and practical engineering, to be solved.
磨损失效系指表面之间的相对滑动摩擦导致其工作表面金属不断磨损而产生的失效。
Wear failure refers to the relative sliding friction between the surfaces causes the surface of the metal continue to wear their work arising from the failure.
其主要功能是减少轴瓦与曲轴间的滑动摩擦磨损，提高发动机曲轴及连杆的使用寿命。
Its primary functions are to reduce wear and tear between bearing and shaft, and raise longevity of shaft and connection rod.
大量运动部件、滑动摩擦、极短时间内运动方向的变化以及机械冲击等都使摩损加剧。
The great number of moving parts, the sliding friction, the reversal of direction at rapid intervals, and the mechanical shock involved all contribute to severe wear.
因圆锥滚子大端与内圈挡边之间滑动摩擦，其极限转速往往低于同尺寸的圆柱滚子轴承。
For tapered roller large end and sliding friction between the inner wall, the speed limit is often lower than the same size cylindrical roller bearings.
分析了滑动摩擦副疲劳损伤的产生机理，指出疲劳损伤产生的根本原因是动应力状态。
The originating mechanism of fatigue damage of sliding friction couples is analyzed and that the ultimate causation of fatigue damage is dynamical stress state is pointed out.
在考虑裂纹受压闭合与滑动摩擦的基础上，给出了损伤张量、损伤应变及有效弹性常数。
Considering the crack-closing and friction between crack-surface under compression, the damage tensor, damage strain and effective elastic moduli are formulated.
滑动摩擦隔震是结构抵御地震作用的一种重要的被动控制措施，具有广阔的工程应用前景。
Sliding isolation is an important passive control measure to defend against earthquake action, thus it possesses very broad prospect in engineering practice.
滑动摩擦隔震是结构抵御地震作用的一种重要的被动控制措施，具有广阔的工程应用前景。
Sliding isolation is an important passive control measure to defend against earthquake action, thus it possesses very broad prospect in engineering practice.
应用推荐