用溶液聚合法制备丙烯酸酯合成树脂。
Synthetic resin of acrylate was prepared with solution polymerization.
通过溶液聚合法制得了阻燃性丙烯酸酯胶。
Fire retardant acrylic ester was prepared by the radical copolymerizations.
找到了溶液聚合和本体聚合适宜的工艺条件。
It has been found suitable technological conditions of solvent polymerization and bulk polymerization.
溶液聚合丁苯橡胶。
采用溶液聚合法合成了粉末涂料用丙烯酸树脂。
The acrylic resin for powder coatings has been prepared with solution polymerization process.
溶液聚合溶液聚合是将单体溶解在溶剂中来实现的。
Solution polymerization is carried out by dissolving the monomer in a solvent.
采用自由基溶液聚合法合成了阳离子环氧丙烯酸树脂。
The title cationic epoxy acrylic resin was synthesized with the method of free-radical solution polymerization.
通过溶液聚合、沉淀聚合和乳液聚合等方法制备微凝胶。
The microgels can be prepared by solution polymerization, precipitation polymerization or emulsion polymerization process.
与本体聚合相比，在溶液聚合中对反应热的控制比较容易。
Thermal control is much easier in solution polymerization compared to bulk polymerization.
采用溶液聚合研究了高固含量反应性丙烯酸酯树脂的制造工艺。
A research is made on the production process of the high NV reactive acrylic resin by solution polymerization.
采用自由基水溶液聚合方法合成了超高分子量的丙烯酸(钠)聚合物。
By the method of free-radical polymerization in solution, cross-linked copolymer of sodium acrylate and acrylic acid of super-high molecular weight.
采用溶液聚合法，在淀粉上原位接枝聚合得到淀粉接枝聚乳酸共聚物。
Poly (lactic acid) (PLA) was in situ grafted to starch in one step by using solution method and get the starch grafted PLA copolymer.
介绍了应用水溶液聚合方法合成了星形聚丙烯酰胺(SPAM)的方法。
Star polyacrylamide (SPAM) was synthesized by the aqueous solution copolymerization method.
采用自由基溶液聚合方法，合成了可用于阴极电泳涂料的阳离子型丙烯酸树脂。
A kind of acrylic cationic resin applied to cathodic electrophoretic coating was synthesized with the method of free-radical solution polymerization.
本文采用溶液聚合法合成较高分子量的聚丙烯腈，将其配成电纺液后对其进行了研究。
In this thesis, we synthesized the polyacrylonitrile with a higher molecular through the solution polymerization, then we prepared the electrospinning solution using the prepared polyacrylonitrile.
采用本发明的聚氨酯预聚体作为交联剂，通过常规自由基 溶液聚合就可制得水凝胶。
The polyurethane cross-linking agent has a structural formula (I) and can be used for preparing aquagel.
讨论了间歇式和连续式溶液聚合反应器的特点，并相应推荐了一些新型溶液聚合反应器。
The features of batch and continuous solution polymerization reactors were discussed and some new solution polymerization reactors were recommended with 7 references.
方法：分别用溶液聚合、本体聚合和溶液-本体聚合的方法，制备渗透型药用丙烯酸树脂。
METHOD the osmotic acrylic resin Eudragit RS was synthesized respectively by means of solution polymerization, bulk polymerization and solution bulk polymerization.
综述了微波技术在高分子本体聚合、溶液聚合、乳液聚合和功能高分子聚合中的应用。
The study and application of microwave technique in bulk polymerization, solution polymerization, emulsion polymerization and functional polymer polymerization are reviewed.
其合成方法以溶液聚合为好。增韧效果与体系相态结构、界面键合和环氧基体的延展性有关。
The best synthetic method was solution polymerization and the toughening efficiency was related to morphology, interfacial bonding and matrix deformation of the system.
采用水溶液聚合法合成了淀粉接枝丙烯酰胺聚合物，研究了聚合反应动力学和聚合反应机理。
One starch graft acrylamide copolymer was synthesized by graft copolymerization of starch and acrylamide in solution, and the polymerization kinetics and its mechanism was discussed.
将液态含氟丙烯酸单体与丙烯酸酯类单体采用常压溶液聚合工艺，合成了支链含氟的丙烯酸树脂。
A branched fluorine - containing acrylic resin has been developed through solution polymerization at normal pressure with liquid fluorine - containing acrylic acid monomer and acrylate monomers.
采用溶液聚合法制备高性能丙烯酸树脂，以“饥饿态”进料法聚合可缩短反应时间，提高单体转化率。
The experimental results showed that using the so-called starved feeding mode was able to shorten the reaction time and raise the conversion ratio of monomers.
研究了过硫酸铵—亚硫酸氢钠—碳酸氢铵引发下丙烯酰胺水溶液聚合的动力学，导出了聚合动力学方程。
The kinetics of polymerization of acrylamide in aqueous solution induced by ammonium persulphate-sodium bisulfite-ammonium bicarbonate is studied and a kinetic equation is therefore obtained.
鲁华异戊橡胶(LHIR)是一种具有高顺式- 1,4 -含量和高分子量的溶液聚合的聚异戊二烯。
Luhua isoprene rubber (LHIR) is a kind of solution-polymerization polyisoprene with high cis-1, 4 content and high molecular weight.
阐述了采用溶液聚合和乳液聚合合成含氟共聚物的方法，探讨了含氟整理剂防水、防油、防污的作用机理。
The solution copolymerization, emulsion copolymerization, and mechanism of waterproof, oilproof and antisoil of fluorine containing finishing agents are discussed.
阐述了采用溶液聚合和乳液聚合合成含氟共聚物的方法，探讨了含氟整理剂防水、防油、防污的作用机理。
The solution copolymerization, emulsion copolymerization, and mechanism of waterproof, oilproof and antisoil of fluorine containing finishing agents are discussed.
应用推荐