结果发现，铜固溶在钨中，并形成了置换固溶体。
The results show that Cu solubilizes in W and the substitutional solid solution is formed.
钌含量较低时，主要为锡基固溶体。
When content of Ru is lower, the structure of coat is Sn-base sosoloid.
此系统不生成固溶体。
由于其含有金属键，也可以采用固溶体合金化。
It can also be strengthened by solid alloying for its partial metallic bonds.
该焊剂溶体(22)覆盖该外表面(18)的一部分。
The flux solution (22) covers a portion of the outer surface (18).
晶相组成为圆柱状刚玉、圆粒状锆石和莫来石固溶体。
The crystal phase is composed of the cylinder corundum and the circle solid solution of the zirconia and mullite.
最终形成在平面上呈条带状、纵向呈旋回的岩溶体系。
Final form were banded in the plane, vertical karst cycles system.
制备的合金呈现出铅固溶体和铅锡共晶交替排列的结构。
The prepared alloy appears the alternant structure with the Pb-based solid solution and the Pb-Sn eutectic.
碳氮化钒是氮化钒和碳化钒的固溶体，是重要的钢中添加剂。
Vanadium nitride and carbide, as a solid solution, is an important additive to steel.
含铁碳化物或含碳铁的固体溶体，冷却可形成珠光体或马氏体。
A solid solution of ferric carbide or carbon in iron; cools to form pearlite or marten site.
钒基固溶体贮氢合金是近年来开发的一种新型高性能贮氢材料。
Vanadium base solid solution hydrogen alloy is a kind of the high performance materials developed in recent years.
提出采用自蔓延高温合成法制备钒基固溶体贮氢合金的新工艺。
A new technique named self propagating high temperature synthesis was proposed to prepare V-based solid solution storage hydrogen alloys.
本文用经验电子理论对铬铁体心立方结构无序固溶体进行了分析。
The results of the empirical electron theory of Fe-Cr bcc disordered solid solutions are reported.
该合金的显微组织为硬的铝锡固溶体基体上分布着软的锡相质点。
The microstructure of the aluminum base alloys is the soft Sn phase particles distributing on the hard matrix(Al-Sn solid solution).
电导率的增加是含钪锆过饱和固溶体的分解形成弥散型的复相结构。
The increasing of conductivity is the decomposition of the supersaturate solid solution contain Sc and Zr forming dispersion complex phase.
其结论印证了“过饱和固溶体分解反应的普遍规律”中的部分内容。
Experimental results have testified partial content for the universal rule of decomposition reaction of supersaturated solid solution.
在较高温度时，只存在奥氏体，0.77%的碳溶解在铁里形成固溶体。
At the upper temperatures, only austenite is present, the 0.77% carbon being dissolved in solid solution with the iron.
合金：由两种或多种元素组成的金属材料，以化合物或固溶体形式存在。
Alloy: Metallic substance composed of two or more elements, as either a mixture, compound, or solid solution.
本文首先对国内外BCC固溶体型储氢合金的研究进展进行了全面综述。
In this thesis, the research and development of hydrogen storage alloys with BCC vanadium-based solid solution were reviewed first.
指出偏析不是引起硅脆的根本原因，硅脆是固溶体发生有序转变的结果。
The segregation was found not to be a main cause of the Si brittleness, which may arises from ordered transformation of the solid solution.
铝中加入稀土，可降低铝固溶体中硅的含量，这是提高铝导电率的主要原因。
The addition of re in aluminium lowers the silicon content in the solid solution, which is responsible, mainly, for the increase in conductivity of the aluminium conductor.
试验结果表明，母带和凝固层靠相互扩散形成固溶体而实现良好的冶金结合。
The results show that the mother sheet and the grown layer are bonded by diffusion forming a solid solution.
研究了挤压铸造中金属液流的充型特性，利用高速摄影观察溶体的充填状态。
This paper studies the filling type characteristics of the metal liquid flow in squeeze casting, and employs high-speed photography to examine the filled state of melting body.
时效初期，过饱和固溶体分解形成原子偏聚区，电子散射增加，合金电导率下降。
At the beginning of ageing, GP zone was formed with the decomposition of the supersaturated solid solution, electron scattering increased, the electrical conductivity decreased.
亦考量结构特征如：晶粒、格隙型固溶体和置换型固溶体、出物、二相颗粒和共晶。
Also considers structural features: grain size, interstitial and substitutional solutes, precipitates, second-phase particles, and eutectoids.
研究了在铜粉和镍粉反应形成固溶体组织的过程中，影响铜粉和镍粉界面扩散和迁移的因素。
The affecting factors on interface diffusion and migration of Cu and Ni powders have been investigated during the process of Cu Ni solid solution which be formed by reaction of Cu and Ni powders.
结果表明，四氢呋喃是良好的共溶剂，游离脂肪酸含量高的废食用油有利于共溶体系的形成。
The results showed that tetrahydrofuran was a better cosolvent and the waste edible oils containing abundant free fatty acids was liable to form miscible system.
结果表明：喷涂过程中粉芯丝材的表皮材料和芯粉材料能相互熔解和融合形成较均匀的固溶体；
The results show that the skin and the cored powders melted and fused to form homogeneous solid solutions during the arc-spraying procedure using the cored wires.
结果表明：喷涂过程中粉芯丝材的表皮材料和芯粉材料能相互熔解和融合形成较均匀的固溶体；
The results show that the skin and the cored powders melted and fused to form homogeneous solid solutions during the arc-spraying procedure using the cored wires.
应用推荐