内装溢流阀控制泵的正常运行。
Install overflow valve inside to control the normal operation of pump.
本文探讨了受控染色工艺在溢流染色机功能上的实现和控制。
This paper expounded the reality and control of controlled dyeing process in overflow dyeing machine.
控制系统对阀的调节方式是当发生溢流时它们被关闭。
The control system so regulates the valves that they are closed when overflow occurs.
对于高，低报警，溢流保护，泵控制，包括宽的压力和温度的要求，和卫生应用。
For high and low alarms, overfill protection, pump control, including wide pressure and temperature requirements, and hygienic applications.
分别采用比例方向流量阀和比例溢流阀来实时控制输送带张力，并分别介绍了其工作原理。
The proportional direction valve and the proportional relief valve were adopted to timely control the belt tension and its working principles were introduce.
合流制排水系统溢流调蓄技术是控制面源污染、削减污染负荷的一项关键技术。
The storage technology of combined sewerage overflow is a key technology to control the surface pollution and cut pollution load.
本文介绍了通过控制比例溢流阀排油流量，控制执行机构运动速度和压力负载敏感的新方法。
A new load-sensing method to control the moving velocity and pressure of actuating mechanism by controlling the displacement of proportional overflow valve is introduced.
介绍的新型电液数字溢流阀是一种数字信息直接控制的导控式压力控制元件。
A new type of electro hydraulic digital relief valve, which is a pilot pressure control component directly controlled by digital information is introduced.
泵体与方向控制阀组合，并内置可调溢流阀，单向阀，可大大简化系统的设计与安装。
The pump body combination with control valve, and with built-in adjustable relief valve, one-way valve, it could greatly simplify the system design and installation.
本文研究了用先导式溢流阀作为恒压油源控制器的性能，所得结论，曾在实船的施工中获得印证。
This paper researches into the quality of the pilot relief valve of a constant pressure pump station. The conclusion reached has been proved in the building of ships.
从密地选矿厂生产现状入手，提出了应用旋流筛对螺旋分级溢流进行控制分级的新工艺。
According to the present product state of the Midi concentrating plant, the authors give a new technique of control classification of spiral classifier overflow with cyclone screens.
介绍了PROFIBUS—DP现场总线在溢流染色机控制系统中的应用，采用现场总线技术与PLC技术，实现了对系统各设备的数据采集、处理及监控等功能。
An application of spilled-dyeing machine control system based on profibus-dp was described, FCS and PLC were used to control, get data on spot and monitor the system.
然而，水压传动技术的应用必须以性能优良的水压元件为前提，而直动式水压溢流阀阀口的压力特性对水压控制系统有着重要影响。
This paper carries out the thorough analysis and research to the pressure characteristics of the water direct-actuated relief valves by experiment and simulation.
从流场控制的角度，研究了先导式纯水溢流阀抑制汽蚀方法。
From the view of flow control, the method of cavitation resistance of a pilot-operated water hydraulic valve was investigated.
实践证明，采用该项改造技术，可实现油泵自动控制，不但避免了污油罐溢流事故的发生，而且提高了油田站场的工作效率。
The practice shows that the reformed technique can realize automatic control of sump pump. Not only it avoids waste oil overflow accident, but also it improves station operational efficiency.
本文在分析溢流表孔弧形工作闸门控制需满足要求的基础上，提出控制系统组成、控制方式的设计以及可实现的控制功能。
Based on the analysis of the control demands of the exterior overfall arc water gate, control system buildup, design of the control mode and the realizable control function are put forward.
基于这种情况，本课题提出了基于负载自适应的流量伺服阀和电液比例溢流阀双阀反馈补偿控制方案。
So a new design scheme about double valve compensation feedback control system based on adaptive load is proposed.
本文介绍了计算机在丝绸行业溢流染色机温度控制中的应用，具体介绍了系统的硬件、软件设计。
Introduces the application of computers to the temperature control of the OVERFLOW dyeing machine used in silk industry. The hardware and software designing of the system are discussed in detail.
罐内液位自动控制并有溢流保护系统；
Tank liquid level can control automatically and have a flood protection system.
压力阀是用来控制液压系统的压力和防止油泵及执行元件的过载。根据功能可分为溢流阀、减压阀、顺序阀、卸荷溢流阀等。
Pressure control valves are used for controlling the pressure in a hydraulic system and protect its hydraulic pump and actuators from over-load.
液压站是由液压泵、驱动用电动机、油箱、溢流阀等构成的液压源装置或包括控制阀在内的液压装置。
Hydraulic station is driven by hydraulic pump, motor, oil tank, the overflow valve is composed of hydraulic source equipment or including control valves, hydraulic equipment.
实际仿真研究表明，该方法能够提高生产效率，解决磨矿过程中有一定难度的溢流浓度和分级粒度控制问题。
Practical simulation and research show that the production efficiency of the milling system is increased, and the overflowing concentration and size grading control are satis…
主要论述了一次水加压直供空调水系统的形式、工作原理及工况分析；通过控制膜流状态确定溢流回水管管径；
The forms of primary flow pressurized direct connection of air conditioning system, operational principle and condition analysis are discussed.
当旋流器给料细度一定时，通过控制分离粒度可以获得所需的溢流细度。
Under the same size fed to a hydrocyclone, the desired overflow size distribution can be obtained by regulating the cut size.
结合溢流阀式变阻尼控制器的特点，分析了一些因素对控制效果的影响。
Considering the characters of relief type variable damping controller, some factors that affects the control performance were analyzed in the paper.
由原来格子式强制排料改为溢流式控制排料，可提高磨细粒度，处理量可增加15-20%。
The intrinsic grille pattern forcing evacuation is instead by overfall pattern controlling one . This can improve the milling of the granule and capacity is increased by 15-20%.
由原来格子式强制排料改为溢流式控制排料，可提高磨细粒度，处理量可增加15-20%。
The intrinsic grille pattern forcing evacuation is instead by overfall pattern controlling one . This can improve the milling of the granule and capacity is increased by 15-20%.
应用推荐