然而现在，一种新型的钢已经被开发出来，它可以在更低的温度下抵抗断裂，同时保持其强度和韧性，而不需要昂贵的添加剂。
Now, though, a novel type of steel has been developed that resists fractures at much lower temperatures, while retaining its strength and toughness—without the need for expensive additives.
再加热到适当的温度以达到所需的强度和韧性。
And then heat it to appropriate temperature in order to reach necessary intensity and toughness.
该树脂韧性好，其浇铸体的热变形温度高是一种综合性能良好的缠绕用树脂。
The resin toughness, the casting of the thermal deformation temperature is a good Comprehensive Performance winding resin.
采用焊接热模拟方法研究了不同温度退火时热影响区韧性的变化。
The use of welding simulation different temperature on the welding HAZ toughness variation has been studied.
通过热激活分析，可以获得定量描述动态断裂韧性、温度及加载速率之间的关系。
A quantitative relationship between dynamic fracture toughness and temperature and loading rate has been obtained through thermal activation analysis.
本文应用流变学有限元法，建立了韧性剪切带内的温度、应力、应变和位移之间的关系。
The relations between temperature, stress, strain and displacement on ductile shear zone are established by using theory of rheology and finite element method.
该树脂韧性好，其浇铸体的热变形温度高，是一种综合性能良好的缠绕用树脂。
The resin toughness is good, the casting body heat distortion temperatures are high, is a complex entanglement with a good performance resin.
其基础树脂固化后的硬度和热变形温度较高，同时又具有良好韧性和耐气候性。
Based on the resin curing the hardness and thermal deformation temperature higher, but also has a good climate of tolerance and toughness.
研究了正火处理对FAS390Q桥壳钢显微组织、强度、冲击韧性和韧脆转变温度的影响。
The effect of normalizing on microstructure, strength, impact toughness and ductile-brittle transition temperature of FAS390Q axle housing steel was studied.
结果表明，随着时效温度的升高，冲击韧性呈下降趋势。
The results indicate that impact toughness of alloy will descend with ageing Treatment temperature increasing.
在适当的压力、温度环境下合成致密度、弯曲强度、断裂韧性、硬度值可满足实际应用背景的梯度夹层。
The compacting density, bending strength, fracture toughness and rigidity value of the synthesis can be prepared to be applicable gradient material structure under suitable pressure and temperature.
具有较高的热变形温度、断裂延伸率和冲击韧性，有效防止了制品在生产和使用中的开裂，同时具有固化快的特点。
A higher distortion temperature, elongation and fracture toughness, effectively preventing the production and use of products in the cracking, a fast curing the characteristics.
在试验温度区内，控制韧性的因素是断裂载荷、纤维裂纹长度和单位纤维裂纹扩展能量。
Within the range of test temperature, the factors controlling the toughness are fracture loads, the lengths of fibrous crack, and the energy absorbed by each fibrous crack extension.
需要适当的程间温度和正确选择填充金属材料来防止冷热裂缝，产生适当的蠕变阻力和韧性。
The proper interpass temperature is required to prevent cold and hot cracking as well as the proper selection of welding filler material, to produce the proper creep resistance and toughness.
本品是高韧性的延长凝胶，环境温度或手部温度的变化而使光疗甲上的颜色随着变化。
It is a high toughness gel, the color will change as the temperature changing in environmental.
本文研究了刚性粒子PS添加量、基体韧性、加工温度对PVC冲击强度的影响。
The study was made on the effects of the contents of rigid PS particles, the toughness of PVC and processing temperature on PVC impact strength.
研究了轮箍钢低倍组织和连铸温度对白点敏感性、断裂韧性的影响。
The effects of the macrostructure of tyre steel and continuous-casting temperature on hydrogen flaking and fracture toughness, K_(IQ), have been investigated.
岩石圈具有温度高、强度低和强烈流变分层等特征，且下地壳表现为韧性流动变形。
The lithosphere beneath this area is associated with high temperature, low strength and intensive rheological stratification, and the lower crust is characterized by ductile flow deformation.
随着应变时效温度升高，强度和硬度增加，塑性和韧性下降，屈强比呈升高的趋势，形变强化指数降低。
With the strain aging temperature increasing, strength and hardness increases, plasticity and toughness decreases, yield ratio has the ascending trend, hardening index decreases.
研究了硅量和温度对球墨可锻铸铁冲击韧性的影响。
In this article, the influence of silicon content and temperature on impact toughness of malleable nodular cast iron has been studied.
蠕铁的韧性——脆性转变温度铸态和退火态均随磷含量的增加而升高。
The ductile-embrittlement transition temperature of vermicular graphite cast iron increased with increasing phosphorus content both in the as-cast and annealed condition.
PC以高冲击强度而著称，具有突出的韧性，优良的电绝缘性，宽广的使用温度和尺寸稳定性。
PC is really excellent as for impact strength, tenacity, electric insulation and dimension stability and has broad operation temperature range.
对试验钢筋的应变时效敏感性、韧脆转变温度、可焊性、强度与韧性的配合进行了系统的测试和研究。
The sensibility of strain aging, ductile-brittle transit temperature, weldability, and the coordination between strength and ductility of reinforced steel bars were systematically investigated.
两个时效峰的硬度和强度相差很小，在较低温度下时效第二峰的强度、硬度、塑性、韧性较高。
At lower temperature, the strength, hardness, plasticity and ductility of the alloy at the second ageing peak are higher than those at the first one.
实验结果表明，玻璃布环氧层板具有明显的应变率、温度效应；在室温以上温度环境下，该层板具有动态韧性。
The experiment results show that the dynamic response of the laminates is clearly dependent upon temperatures and strain rates and there exists dynamic toughness in the laminates.
结构钢材的韧性随温度降低而下降，其破坏形态也由塑性屈服向脆性断裂转变，构件的承载力也由强度控制变为材料的韧性控制。
The toughness of steel decreases as temperature drops, its breakage transfers from plasticity to brittleness and the loading capacity is controlled by the toughness, not the strength.
结果表明，本钢X70管线钢具有高强度、高抗动态撕裂能力、高低温冲击韧性以及低韧脆转变温度。
The results indicate that the X70 pipeline steel with acicular ferrite microstructure has high strength, high toughness, low transition temperature and high dynamic tear-resistance.
结果表明，随正火温度的提高，铁素体数量减少，硬度与强度提高，塑性与韧性降低。
The results show that as the normalized temperature is increased, the volume fraction of ferrite decreases, hardness and strength increases, plasticity and ductility decreases.
结果表明，随正火温度的提高，铁素体数量减少，硬度与强度提高，塑性与韧性降低。
The results show that as the normalized temperature is increased, the volume fraction of ferrite decreases, hardness and strength increases, plasticity and ductility decreases.
应用推荐