蓄热室温度效率可达到80%以上，热效率可达到70%以上。
Temperature efficiency is up more than 80%, thermal efficiency is up more than 70%.
通过数值模拟分析了蓄热体材质、换向时间、温度效率和热效率等的关联关系。
The relevant relations of regenerator medium, exchange time, temperature efficiency and thermal efficiency are analyzed by(numerical) simulation.
这样一来，下送风空调室内热分层高度就可能会有所的升高，致使下送风空调房间的温度效率降低。
And then, it needs to increase the supply air flow rate to ensure indoor thermal comfort, while it may bring about the rise in indoor thermal stratification height.
结果表明，空气的换向时间、蜂窝陶瓷蓄热体换热器的体积等是影响其温度效率和热回收率的重要因素。
The results show that: the switch time of air and the bulk of storage bed play important roles as regards its thermal performance characteristics.
提出了适用于评价控制区域内最大温度的评价指标——基于热源的温度效率，并探讨了复合温度扩散反问题。
An evaluation index, named temperature effectiveness based heat source, is proposed. And the inverse problem of hybrid temperature diffusion is discussed.
提出了适用于评价控制区域内最大温度的评价指标——基于热源的温度效率，并探讨了复合温度扩散反问题。
A evaluation index, named temperature Effectiveness Based Heat Source, is proposed. And the inverse problem of hybrid temperature diffusion is discussed.
对比了不同空气系数下，不同排烟温度时的余热回收温度效率，探讨了利用燃烧过程中生成水的冷凝热及其对污染物的吸收作用。
Discussed taking advance condensation heat of water in waste fume. at the same time, the water can absorbed several pollutants in waste fume.
人们在舒适的温度范围内更满意自己的效率。
People in their comfort zone of temperature are more satisfied with their productivity.
还能提高肌肉温度以达到最佳灵活性和效率。
Italso raises your muscles' temperature for optimal flexibility and efficiency.
问题是热能转化系统需要更高的温度，而太阳能电池的效率在高温下迅速降低。
The problem has been that high temperatures are necessary to power heat-based conversion systems, yet solar cell efficiency rapidly decreases at higher temperatures.
大部分太阳能硅电池在温度到达100摄氏度已呈现惰性，而PETE设备在远超过200摄氏度的情况下还没到达效率峰值。
While most silicon solar cells have been rendered inert by the time the temperature reaches 100 degrees Celsius, the PETE device doesn't hit peak efficiency until it is well over 200 degrees c.
设法提高热能转换器的温度将可提高经营效率。
Finding ways to boost the temperature of heat exchanger fluids would raise operating efficiency, too.
和现在运用在太阳能板的光电伏打科技不同，新的方法在温度越高的时候表现越好，光能伏打方法在温度升高时则效率逐渐降低。
Unlike photovoltaic technology currently used in solar panels — which becomes less efficient as the temperature rises — the new process excels at higher temperatures.
但是燃烧牛粪效率低下，而且在冬季室内温度很低。
But burning dung is inefficient and, in winter, temperatures plunge indoors.
并且智能烤炉比煤气烤箱效率高两倍以上，它的温度转换速度更快。
And induction cooktops are more than twice as energy efficient as gas burners, allowing for quicker temperature changes.
例如，因为温度的不断增高，变压器可能出现较高的失效率，而某些类型的火力发电站的效能也可能会显著的降低。
For instance, transformers could suffer higher failure rates and efficiency of some types of thermal power station could be markedly reduced because of increasing temperatures.
这也就意味着你身体的自动降温机制更有效率，身体的自动降温会使你的心跳速度相应变缓，皮肤温度也相应变低。
That means your body will cool itself more efficiently, which keeps your heart rate and skin temperature lower.
本文中，机型采用红外加热，温度均匀、效率高。
In this paper, models using infrared heating, temperature uniformity and high efficiency.
针对微型燃气涡轮发动机喷嘴的雾化对燃烧室火焰稳定性、温度分布和燃烧效率的影响。
The nozzle spray characteristics of micro-turbine engines affect the stabilization of flame of the combustion chamber, the distribution of temperature, and the efficiency of combustion.
a quasar冷却系统使用温度高达华氏140度的水，因此对于能源的需求比相同散热效率的风冷设备低了足足40%。
The Aquasar cooling system USES water at temperatures of up to 140 degrees, and as a result consumes up to 40 percent less energy than a comparable air-cooled machine.
另一方面，通过加强对物料的温度控制，可以减少能量的浪费，降低生产成本，提高挤出效率。
On the other hand, by improving the control of the melt temperature, it can distinctly reduce the waste of energy, pull the cost down and enhance the efficiency of extrusion.
蒸汽在发动机中膨胀后，温度必须大幅度地下降以获得高效率。
For high efficiency, the steam must decrease substantially in temperature as it expands within the engine.
先进的小发动机涡轮的流量小，叶片短，展弦比低，二次损失及叶尖漏泄损失大，效率低，温度高冷效差。
The advanced small gasturbines feature small mass flow ratio, short vanes and blades with low aspect, high second flow and blade tip leakage losses, and low efficiency.
配合数控温度，时间设定及数控风量，附气流量显示，可准确及有效率对芯片进行返修。
With digital temperature setting, time setting, digital airflow setting and airflow parameter display, the performance becomes more efficiently and precisely.
当温度到达或超过30摄氏度时，这种效率下降尤其明显。
The inefficiency is particularly pronounced as temperatures approach or exceed 30 degrees centigrade.
可采用较高的压力及温度，从而增加原料的分解，提高搅拌效率并加速起沫。
Higher pressures and temperatures may be used to increase material break-up, improve mixing and speed rise times.
可采用较高的压力及温度，从而增加原料的分解，提高搅拌效率并加速起沫。
Higher pressures and temperatures may be used to increase material break-up, improve mixing and speed rise times.
应用推荐